Hollis Sidemount Regulator Package – 2x DCX + 2x 200LX + Hoses + 2x Pressure Gauges + Necklace

This package puts together two complete Hollis sidemount regulators in one order: two DCX first stages paired with two 200LX second stages, plus the hoses, gauges, and necklace needed to route them. The DCX is an over-balanced first stage built on the DC1 platform, with a 5th low pressure port that points straight down from the body for clean hose routing on backmounted doubles or sidemount rigs. Both first stages carry Hollis' PVD (Physical Vapor Deposition) coating, a harder finish than standard plating, and each has 2 high pressure and 5 low pressure ports so you have room to route everything without fighting the regulator.

The two 200LX second stages carry the same PVD plating on their valve and metal components, along with a diver-adjustable inhalation knob and a Dive/Pre-Dive switch with a large, easy-to-find venturi lever. Each 200LX converts from a right-handed to a left-handed hose configuration in a matter of minutes, with no tools or recalibration, which matters when you're setting up a left-post backup second stage on a sidemount rig. Two Hollis LP hoses, two high pressure hoses for the SPGs, and two Hollis Pressure Gauge Modules (2-inch brass core, 0-5,000 PSI, luminescent face) round out each regulator, and an adjustable Hollis necklace is included to hold the backup second stage under the chin for quick recovery.

Choose YOKE or DIN when you order, and that selection applies to both first stages so your two regulators match. Everything here is sized and configured as a matched pair, so you're outfitting both sidemount tanks in a single purchase rather than sourcing the pieces separately.

• Two Hollis DCX first stages with an over-balanced diaphragm design and PVD industrial plating for corrosion resistance
• 5th low pressure port on each DCX points straight down, for clean hose routing on sidemount rigs or backmounted doubles
• Two Hollis 200LX second stages with a pneumatically balanced, PVD-plated brass valve for smooth breathing
• Each 200LX converts between right-handed and left-handed hose configuration in minutes, no tools or recalibration needed
• Diver-adjustable inhalation knob and Dive/Pre-Dive switch with a large venturi lever on both 200LX second stages
• Two Hollis LP hoses and two high pressure SPG hoses with corrosion-resistant chrome-plated brass fittings
• Two Hollis Pressure Gauge Modules, 2-inch brass core with a 0-5,000 PSI range and luminescent face plate
• Adjustable Hollis necklace holds the backup second stage under the chin for quick recovery
• Both first stages are set up to the same connection, YOKE or DIN, so your matched pair is ready to configure together

• 2× Hollis DCX First Stage Dive Regulator
• 2× Hollis 200LX Second Stage Black Dive Regulator
• Hollis LP Hose
• Hollis LP Hose
• 2× Hollis Pressure Gauge Module Metal w/o Boot
• 2× Hollis High Pressure Hose for SPG
• Hollis Adjustable Necklace Regulator Accessory