Hollis 200LX Second Stage Black Dive Regulator
In stock — ships from Irvine, CA
This item is currently on backorder. Order now to reserve yours, and we will ship it as soon as it is back in stock.
Hollis 200LX Second Stage Black Dive Regulator is backordered and will ship as soon as it is back in stock.
Pickup available at In Store
Usually ready in 2 hours
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Product Information
The Hollis 200LX Second Stage (SKU 240.2000.LX) is a standalone, pneumatically balanced scuba second stage built with a PVD plated brass valve and PVD plated stainless steel metal ring, adjustable knob, and Dive/Pre-Dive end cap for smooth, easy breathing and a long-lasting finish.
Who it is for
This second stage suits divers pairing it with the Hollis DCX first stage, as sold in the 200LX + DCX set, who want a balanced regulator that can be fine-tuned on the fly. It is also sold as the second-stage component of the 200LX + DCX flagship regulator set, so it fits divers upgrading a single component as well as anyone assembling a complete DIN or Yoke rig. The diver-adjustable inhalation knob and large, soft-grip Venturi lever make it a good match for divers who want to tune breathing effort and flow at the surface or underwater without extra tools.
Key details
- Pneumatically balanced PVD plated brass valve for smooth, easy breathing at depth
- Reversible demand valve, converts from right-handed to left-handed hose configuration without specialty tools or recalibration
- Diver adjustable inhalation knob to customize inhalation effort
- Adjustable Dive/Pre-Dive switch with a large, soft rubber grip Venturi lever
- Ergonomic exhaust channels direct bubbles away from the diver's field of view and reduce exhaust effort
- Improved orthodontic mouthpiece with dual color tabs
- PVD plated stainless steel metal ring, adjustable knob, and Dive/Pre-Dive end cap
Compatibility and sizing
The 200LX Second Stage is also offered paired with the Hollis DCX first stage as the 200LX + DCX set, which is available with either a DIN or a Yoke first-stage connection and ships with a MiFlex braided hose. Purchased standalone, this second stage is the same unit Hollis pairs with its DCX first stage in the 200LX + DCX set.
DiveCatalog.com is an authorized Hollis dealer and a dive shop in Irvine, California, serving divers since 2003. Call 888-701-4017 or start a chat if you have questions about fit, hose configuration, or pairing this second stage with a first stage.
- Balanced valve: Pneumatically balanced PVD plated brass valve results in smooth, easy breathing.
- Reversible hose side: Converts from right-handed to left-handed hose configuration without specialty tools or calibration.
- Adjustable inhalation: Diver adjustable inhalation knob lets you customize inhalation effort.
- Dive/Pre-Dive switch: Large Venturi lever has a soft rubber grip, making it easy to locate and use.
- Bubble management: Ergonomic exhaust channels direct bubbles away from the diver's field of view and reduce exhaust effort.
- Comfortable mouthpiece: Improved orthodontic mouthpiece features dual color tabs.
- PVD Industrial Plated finish: PVD plated stainless steel metal ring, adjustable knob, and Dive/Pre-Dive end cap.
- Set compatibility: Serves as the second stage in the 200LX + DCX complete regulator system, available in DIN or Yoke.
| Brand | Hollis |
| Product Type | Regulator Second Stage |
| SKU | 240.2000.LX |
| MPN | 240.2000.LX |
| Barcode | 020545210023 |
| Valve Type | Pneumatically balanced, PVD plated brass |
| Metal Finish | PVD plated stainless steel ring, adjustable knob, and Dive/Pre-Dive end cap |
| Hose Configuration | Reversible, right-handed or left-handed, no specialty tools required |
| Inhalation Adjustment | Diver adjustable inhalation knob |
| Dive/Pre-Dive Switch | Large Venturi lever with soft rubber grip |
| Mouthpiece | Improved orthodontic mouthpiece with dual color tabs |
| Set Availability | Also offered as 200LX + DCX set with DIN or Yoke first-stage connection |
| Set Hose | MiFlex braided hose included with 200LX + DCX set |
⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
How often does a scuba regulator need servicing?
Follow the interval in your regulator's manual, since manufacturers commonly specify an annual inspection or a set number of dives and many warranties depend on it. A regulator is life-support equipment, so service belongs with a factory-trained technician rather than being attempted at home. Have it looked at sooner than scheduled if you notice increased breathing effort, free-flow, bubbles, or water in the second stage.
How do I rinse and care for a regulator after diving?
Make sure the dust cap is dry and firmly seated over the first-stage inlet before the regulator goes anywhere near water, because water inside the first stage is the leading cause of internal corrosion. Rinse in fresh water without pressing the purge button, since purging while depressurized can draw water back into the second stage. Shake out the water and hang it to dry with the hoses in wide, gentle loops rather than tight bends.
Can I fly with a scuba regulator?
Regulators travel well and are usually best carried in hand luggage where they will not be crushed or lost. A regulator holds no gas of its own, so there is nothing inherently problematic about it on an aircraft, though the airline and security screeners always have the final say. Pack it dry with the dust cap in place, in a padded regulator bag or wrapped in soft gear.
Can I use my regulator with nitrox?
Many modern regulators are supplied as suitable for nitrox mixes up to 40 percent oxygen, which is the widely used recreational industry standard, while anything above that requires dedicated oxygen-clean equipment and procedures. Confirm what your specific regulator's manual states, and follow your nitrox training and your fill station's requirements. Never assume a regulator is oxygen-service clean simply because it looks clean or is new.
What is the difference between DIN and yoke regulators?
A yoke (A-clamp) fitting clamps over the tank valve and is the most common connection across much of the recreational world, while a DIN fitting screws into the valve and is standard in much of Europe and in technical diving. DIN captures the o-ring inside the threads, which many divers consider more secure, but yoke is often what rental cylinders provide. Adapters exist in both directions, so check what is used where you dive before deciding.
What is the octopus regulator for?
The octopus is your backup second stage, carried so you can share air with a buddy who is out of gas, or breathe from it yourself if your primary fails or free-flows. It is normally on a longer, brightly colored hose so it is easy to find and hand over under stress. Secure it in the triangle between your chin and the bottom of your rib cage so it is instantly accessible and not dragging through sand or coral.
How should I store a regulator between dive trips?
Store it fully dry, out of sunlight, with the dust cap in place and the hoses in wide loops rather than tightly coiled. Avoid hanging it by the second stages for long periods, which stresses the hose fittings; laying it flat in a padded bag or hanging it by the first stage is kinder. If it has sat unused for a long stretch, have it checked before your next trip rather than assuming it is ready to dive.
Is there a recall on the Hollis 200LX second stage?
Yes. Hollis issued a voluntary recall notice dated March 26, 2026 for 200LX second stages within specific serial number ranges due to a risk of inlet tube assembly fracture. Check your unit's serial number against Hollis's official recall notice before diving it, and contact Hollis or DiveCatalog.com at 888-701-4017 to confirm whether your unit is affected.
Can the Hollis 200LX second stage be used on either side of my chest?
Yes. The 200LX is a reversible demand valve that converts from a right-handed to a left-handed hose configuration without specialty tools or recalibration, so it can be set up on either side of your first stage to match your preferred hose routing.
Does the Hollis 200LX second stage come with a first stage?
No. This listing is the standalone 200LX second stage only, identified by SKU 240.2000.LX. Hollis also sells it already paired with the DCX first stage as the 200LX + DCX set, which is available with a DIN or a Yoke connection and includes a MiFlex braided hose.
What finish does the Hollis 200LX second stage use and why does it matter?
All metal components, including the brass valve, metal ring, adjustable knob and Dive/Pre-Dive end cap, are PVD Industrial Plated for a durable finish.












