Scubapro Supernova Blade Modular Fins System (Pair)

The Supernova is a two-piece fin: the blade and the foot pocket are molded separately and join with a lock-plate system (a multi-tool is included). The open-heel fin ships pre-assembled and ready to dive, and you can buy an optional full-foot pocket to convert the same blades for warm-water diving without boots — or replacement blades alone. It even comes with a SCUBAPRO boat bag.

Size the foot pocket (XS–XL) with the boots you dive: a US men's 9 / EU 42 takes a Medium with 3–5mm boots but a Large with heavy drysuit boots, per ScubaPro's chart. The blade size follows the pocket automatically — Midi blade for XS–M pockets, Maxi blade for L–XL. Between sizes? Send us your shoe size and boot type and we will confirm.

The Supernova is ScubaPro's performance flagship — built for maximum speed, power, and control, with an auto-adjusting central membrane and winglet tips; it won a Red Dot design award and floats (positive buoyancy, 3.69 lbs per pair). The GO Sport is the lighter, simpler boot-fit travel all-rounder. If you dive often, kick against current, or want the most efficient fin, go Supernova; for an easy-traveling do-everything fin, the GO Sport covers it.

Open-heel fins have an adjustable heel strap and are worn with dive boots, which protect your feet on shore entries and add warmth. Full-foot fins slip on like a shoe against bare skin or a thin sock, and are typically lighter and easier to pack. Most scuba divers choose open-heel fins with boots, while full-foot fins suit warm water, snorkeling, and pool use.

Open-heel fins should be sized around the boots you will actually wear, snug with the strap set so your heel stays seated and your foot does not slide forward in the pocket. Full-foot fins should fit like a firm shoe, with no heel lift, no pinched toes, and no gap that lets water pump in and out. Too loose causes heel blisters and lost fins in current, and too tight causes foot cramps.

Choose your boots first and size open-heel fins around them, because sole thickness changes the foot-pocket size you need. A thin warm-water boot and a thick cold-water boot with a rugged sole can easily be a fin size apart. If you already own fins, bring them along when you buy boots so you can check the combination.

Spring straps replace the adjustable rubber strap with a stainless spring that stretches on and off, so there is nothing to buckle with cold or gloved hands and no rubber strap to perish and snap mid-dive. They hold constant tension, which many divers find more comfortable and consistent. They are sized rather than adjustable, so match the length to your foot pocket and the boots you dive.

For travel, length and weight matter most, so shorter blades and travel-specific open-heel or full-foot models pack more easily and save baggage allowance. Some fins have removable blades or compact foot pockets designed for luggage. Pack fins along the outside walls of your bag, where they also act as protection for softer gear.

Paddle fins use a solid blade that transfers power directly, which many divers prefer for precision, control in current, and non-flutter kicks such as the frog kick. Split fins have a slit down the blade that lets water pass through, which generally makes flutter kicking easier on the legs but gives up some control and works less well with other kick styles. Neither is inherently better, so let your kick style, leg strength, and conditions decide, and try both if you get the chance.

Rinse them in fresh water after each dive day, paying attention to buckles, springs, and strap channels where salt collects, and dry them out of direct sunlight. Store them flat or hanging from the foot pocket rather than standing on the blade tips, which can take a permanent bend. Check straps, buckles, and any screws before every trip, since a failed buckle is the most common fin problem.

The blades ship as a pair with a SCUBAPRO boat bag, a multi-tool and a set of Lock Plates for assembly. The foot pocket is not included and is purchased separately, since the Supernova is part of SCUBAPRO's two-piece Modular Fin System. You attach the blades to a Modular Fin System foot pocket using the Lock Plates and the supplied multi-tool.

The Supernova Blade mounts to SCUBAPRO Modular Fin System foot pockets, which are sold separately. SCUBAPRO also lists the Modular Fin System Full Foot Pocket, so the same blades can be used in a full foot configuration. Blade sizes are Midi (XS/M) and Maxi (L/XL); contact us if you need help choosing a size.

The Seawing Supernova Blade is offered in Blue, Pink, Yellow and Turquoise. Each color is available in two blade sizes: XS/M, known as Midi, and L/XL, known as Maxi. Dimensions vary by variant. Item 25.513.002 is listed at 16.93 in long by 9.45 in wide at 0.992 lb, while Yellow Midi SKU 25.512.001 is listed at 15.75 in by 8.66 in at 1.102 lb.

Yes. SCUBAPRO lists the Seawing Supernova Blade as positively buoyant, so the blades float rather than sink if they come off on the surface or on a boat deck. The blade is molded from premium Monprene for long-lasting durability.