Scubapro S-TEK Donut Wing 60 + S-TEK Pro Harness SS + Back Shoulder Waist Pad Armygreen
Scubapro S-TEK Donut Wing 60 + S-TEK Pro Harness SS + Back Shoulder Waist Pad Armygreen - Army Green is backordered and will ship as soon as it is back in stock.
What's in this bundle
Scubapro S-TEK Donut Wing 60 + S-TEK Pro Harness SS + Back Shoulder Waist Pad Armygreen - Army Green is backordered and will ship as soon as it is back in stock.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Product Information
The SCUBAPRO S-Tek Pro System Package pairs the S-Tek Pro Harness with Stainless Steel Back Plate and the S-Tek Donut Wing rated for 60 lb/27 kg lift, and this listing bundles that package with the S-Tek Shoulder & Waist Pad Color Kit in Army Green. The result is a modular technical BCD platform built around a stainless steel plate, a Cordura wing, and swappable Monprene comfort pads.
Who it is for
This system is built for technical divers who want a back plate and wing setup with adjustable TEK LOC shoulders, trim weight mounting points, and argon tank mounting capability on the harness. The built-in carry handle and recessed wing nut socket, designed for use with gloved hands, support divers who rig and break down gear at the dive site.
Key details
- Donut Wing lift capacity: 60 lb / 27 kg
- Harness back plate: Stainless Steel
- Harness weight: 7.19 lb; Donut Wing weight: 2.65 lb; total package weight: 9.833 lb
- Donut Wing materials: 1000D Cordura outer shell, 500D Cordura inner bladder, PU-Coated 1000 Denier Cordura Nylon
- Donut Wing power inflator: BPI (Standard), with an elliptical EPDM corrugated inflator hose and a YKK zipper on the bladder
- Harness: six D-rings total, 3D formed back plate with curved central profile and radiused edges, EVO Angle webbing slots, and adjustable shoulder buckle and D-ring heights for different torso lengths
Compatibility and sizing
The harness and Donut Wing are produced in Black. The S-Tek Shoulder & Waist Pad Color Kit used in this bundle is made of molded Monprene and is offered in Army Green, Black, White, Yellow, Blue, Turquoise, Orange, and Pink; it is compatible with SCUBAPRO's S-Tek Pure or S-Tek Pro Harnesses, letting divers personalize the look of the shoulder and waist padding independent of the harness color.
What's in the box
- S-Tek Pro Harness with Stainless Steel Back Plate
- S-Tek Donut Wing, 60 lb/27 kg
- S-Tek Shoulder & Waist Pad Color Kit, Army Green (two shoulder pads and two waist pads)
DiveCatalog.com is an authorized SCUBAPRO dealer and a dive shop in Irvine, California, open since 2003. Call 888-701-4017 or chat with us if you have questions about harness fit, pad color options, or wing compatibility before you order.
- 3D formed back plate: Stainless steel plate with a curved central profile and radiused edges.
- TEK LOC shoulders: Adjustable shoulder straps for a snug fit.
- Molded Monprene pads: Cushion the shoulders, waist, and back without adding bulk or buoyancy.
- Adjustable fit points: Shoulder buckle and D-ring heights adjust for different torso lengths.
- EVO Angle webbing slots: Allow natural webbing routing through the harness.
- Recessed wing nut socket: Designed for use with gloved hands.
- Mounting capability: Trim weight mounting points and argon tank mounting capability on the harness.
- Built-in carry handle: Integrated into the harness for transport.
- Donut Wing air cell: Rounded profile allows smooth, controlled air migration regardless of diver position.
- BPI power inflator: Includes an elliptical EPDM corrugated inflator hose.
- YKK zipper: Durable zipper on the Donut Wing bladder.
- Color kit personalization: S-Tek Shoulder & Waist Pad Color Kit lets divers swap pad colors.
| Package Lift Capacity | 60 lb / 27 kg |
| Package Weight | 9.833 lb |
| Package BCD Type | Technical |
| Package Gender | Unisex |
| Package Back Plate Material | Stainless Steel |
| Package D-Rings | 6 total |
| Harness Item Number | 22.242.001 |
| Harness Weight | 7.19 lb |
| Harness Length | 16.54 in |
| Harness Color | Black |
| Donut Wing Item Number | 22.240.060 |
| Donut Wing Weight | 2.65 lb |
| Donut Wing Length | 30.12 in |
| Donut Wing Color | Black |
| Donut Wing Materials | 1000D Cordura outer shell, 500D Cordura inner bladder, PU-Coated 1000 Denier Cordura Nylon |
| Donut Wing Power Inflator | BPI (Standard) |
| Pad Kit Item Number | 23.616.005 |
| Pad Kit Weight | 0.57 lb |
| Pad Kit Materials | Molded Monprene |
| Pad Kit Color (this listing) | Army Green |
| Pad Kit Available Colors | Black, White, Yellow, Blue, Turquoise, Army Green, Orange, Pink |
- S-Tek Pro Harness with Stainless Steel Back Plate
- S-Tek Donut Wing, 60 lb/27 kg
- S-Tek Shoulder & Waist Pad Color Kit, Army Green (two shoulder pads and two waist pads)
Frequently Asked Questions
How should a scuba BCD fit?
A BCD should fit snugly enough that it does not ride up toward your ears when inflated, while still letting you breathe fully. Fasten the waist and cummerbund first, then adjust the shoulder straps so the tank sits close to your back and the shoulders cannot slide off. With the BCD fully inflated at the surface you should still be able to take a deep, comfortable breath; if it squeezes your chest, loosen it or move up a size.
How do I rinse and care for a BCD after diving?
Rinse the outside in fresh water and also flush the inside of the bladder, because salt water gets in through the inflator and dump valves. Fill the bladder roughly a third full of fresh water through the oral inflator, slosh it around, then drain it out through the inflator and each dump valve. Hang it to dry out of direct sunlight and store it partially inflated so the bladder walls do not stick together.
Should I use integrated weights or a weight belt?
Integrated weight pockets carry the lead in the BCD itself, which many divers find more comfortable and easier on the hips, while a weight belt keeps the weight independent of your BCD. Either way, you must be able to release your ditchable weight quickly with one hand, and your buddy should know how your system releases. Non-ditchable trim pockets are useful for balance but should never hold weight you might need to drop.
How do I pack a BCD for travel?
Make sure the BCD is completely dry inside and out before packing so it does not mildew in transit. Remove all weights, deflate it fully, and fold or roll it around softer items such as a wetsuit to cushion the inflator and valves. Avoid hard creases in the air cell, and unpack and air it out as soon as you arrive.
When does a BCD need to be serviced?
Follow the service interval in the manufacturer's manual, which is commonly an annual inspection alongside the rest of your life-support gear. Have the inflator, dump valves, and bladder checked any time the inflator sticks, free-flows, feels rough, or the BCD holds air poorly. Between services, confirm that it inflates and deflates properly as part of every pre-dive check.
What is the difference between a jacket-style and a back-inflate BCD?
A jacket-style BCD holds air in panels that wrap around your sides as well as your back, while a back-inflate BCD keeps the entire air cell behind you. Jacket styles tend to feel very stable and upright at the surface, and back-inflate styles keep the chest clear and are often preferred for horizontal trim underwater. Neither is objectively better, so treat it as a fit and preference decision and try both if you can.
Will my BCD fit any scuba tank?
Most recreational BCDs use an adjustable cam band sized for common single-cylinder diameters, so standard aluminum and steel tanks generally work. Re-check the band tension after the first wetting, because webbing can relax slightly and let the tank shift. If you dive doubles or unusual cylinder diameters, confirm compatibility with the manufacturer before assuming it will hold.
What is included with this S-Tek Pro System listing?
This bundle includes the S-Tek Pro Harness with Stainless Steel Back Plate, the S-Tek Donut Wing rated for 60 lb/27 kg lift, and the S-Tek Shoulder & Waist Pad Color Kit in Army Green, which contains two shoulder pads and two waist pads made of molded Monprene.
Is the harness and wing available in Army Green, or only the pads?
The S-Tek Pro Harness and S-Tek Donut Wing are produced in Black. The Army Green color in this listing applies to the S-Tek Shoulder & Waist Pad Color Kit, which is sold separately from the harness and wing shell and is also offered in Black, White, Yellow, Blue, Turquoise, Orange, and Pink.
Will the S-Tek Shoulder & Waist Pad Color Kit fit other SCUBAPRO harnesses?
Yes. SCUBAPRO publishes the S-Tek Shoulder & Waist Pad Color Kit as compatible with both the S-Tek Pure Harness and the S-Tek Pro Harness, so the pads can be swapped between those two harness models to change color without replacing the harness itself.
How many D-rings does the S-Tek Pro Harness have?
The S-Tek Pro Harness has six D-rings total, positioned to support attachment of accessories and gear across the shoulder, waist, and crotch strap areas of the harness.































































