You May Need These
Description
Description
The S-Tek Pro System is a tough, feature-packed harness designed for enhanced comfort at depth. It centers on a 3D formed back plate with adjustable TEK LOC shoulders and cushioning Monprene® pads, delivering a stable, comfortable fit for scuba and technical diving. Built to withstand demanding dive conditions, this harness integrates with rugged gear for underwater missions.
With a stainless steel back plate for durability and a weight of 7.18707 lb, the S-Tek Pro Harness supports demanding dives. Six D-rings provide ample attachment points for lights, reels, SMBs, and other accessories, making it compatible with a wide range of diving configurations.
Key design features include a 3D formed back plate with a curved central profile and fully radiused edges for greater comfort; adjustable TEK LOC shoulders and cushioning Monprene pads; recessed Wing Nut Socket with S-Tek Ergo Nuts designed to be used with cold, wet, or gloved hands and flush-mounted to reduce suit abrasion. EVO Angle webbing slots contribute to a more natural webbing routing that enhances diver comfort during long scuba sessions.
Features
Features
- Molded Monprene® pads provide cushioning for increased comfort
- Adjustable shoulder buckle and D-ring heights for different torso lengths
- 3D formed back plate with a curved central profile and fully radiused edges for greater comfort
- EVO Angle webbing slots for a more natural webbing routing that increases diver comfort and reduces abrasion
- Recessed Wing Nut Socket with S-Tek Ergo Nuts that are ergonomically designed to be used with cold, wet, or gloved hands, easy to tighten/loosen, and flush-mounted to prevent suit abrasion
Specifications
Specifications
| BCD Type | Technical |
| Number of D-Rings | 6 |
| Weight | 7.18707 lb |
| Back Plate Material | Stainless Steel |
| Activity | Technical |
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
How should a scuba BCD fit?
A BCD should fit snugly enough that it does not ride up toward your ears when inflated, while still letting you breathe fully. Fasten the waist and cummerbund first, then adjust the shoulder straps so the tank sits close to your back and the shoulders cannot slide off. With the BCD fully inflated at the surface you should still be able to take a deep, comfortable breath; if it squeezes your chest, loosen it or move up a size.
How do I rinse and care for a BCD after diving?
Rinse the outside in fresh water and also flush the inside of the bladder, because salt water gets in through the inflator and dump valves. Fill the bladder roughly a third full of fresh water through the oral inflator, slosh it around, then drain it out through the inflator and each dump valve. Hang it to dry out of direct sunlight and store it partially inflated so the bladder walls do not stick together.
Should I use integrated weights or a weight belt?
Integrated weight pockets carry the lead in the BCD itself, which many divers find more comfortable and easier on the hips, while a weight belt keeps the weight independent of your BCD. Either way, you must be able to release your ditchable weight quickly with one hand, and your buddy should know how your system releases. Non-ditchable trim pockets are useful for balance but should never hold weight you might need to drop.
How do I pack a BCD for travel?
Make sure the BCD is completely dry inside and out before packing so it does not mildew in transit. Remove all weights, deflate it fully, and fold or roll it around softer items such as a wetsuit to cushion the inflator and valves. Avoid hard creases in the air cell, and unpack and air it out as soon as you arrive.
When does a BCD need to be serviced?
Follow the service interval in the manufacturer's manual, which is commonly an annual inspection alongside the rest of your life-support gear. Have the inflator, dump valves, and bladder checked any time the inflator sticks, free-flows, feels rough, or the BCD holds air poorly. Between services, confirm that it inflates and deflates properly as part of every pre-dive check.
What is the difference between a jacket-style and a back-inflate BCD?
A jacket-style BCD holds air in panels that wrap around your sides as well as your back, while a back-inflate BCD keeps the entire air cell behind you. Jacket styles tend to feel very stable and upright at the surface, and back-inflate styles keep the chest clear and are often preferred for horizontal trim underwater. Neither is objectively better, so treat it as a fit and preference decision and try both if you can.
Will my BCD fit any scuba tank?
Most recreational BCDs use an adjustable cam band sized for common single-cylinder diameters, so standard aluminum and steel tanks generally work. Re-check the band tension after the first wetting, because webbing can relax slightly and let the tank shift. If you dive doubles or unusual cylinder diameters, confirm compatibility with the manufacturer before assuming it will hold.
