Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Product Information
The Tusa Liberator TC1 Diving Package bundles TUSA's Liberator BC0103B buoyancy compensator, the TC1 (IQ1301) wrist dive computer, and the RS1001 regulator, which pairs TUSA's R1000 balanced-diaphragm first stage with the S0001 second stage, into one scuba equipment set. The Liberator is a wrap-around jacket-style BCD sized XS to XL with Advanced Weight Loading System III, the TC1 runs the Buhlmann ZHL-16C decompression algorithm on a rechargeable Li-ion battery, and the RS1001 first stage has 2 high-pressure and 4 low-pressure ports.
Who it is for
This package suits a diver who wants to assemble core life-support equipment, a BCD, a dive computer, and a regulator, in one purchase. The Liberator's Ultimate Stabilizing Harness is built to keep a tank from rolling, its O.P.E.V. system is designed for quick inflate and deflate control, and the BCD is DUO AIR II compatible. The TC1 supports Scuba, Plan, Free diving, and Gauge modes with audio, visual, and vibration alerts, which fits a diver who wants one computer across different dive styles.
Key details
- Liberator BCD exterior is 500D Cordura with a 420D nylon, urethane-laminated interior, in sizes XS, S, M, L, and XL.
- Liberator lift capacity ranges from 18 lbs (8.2 kg) in XS to 46.1 lbs (20.9 kg) in XL, with weight cartridges rated at 8 lbs (3.63 kg) each.
- TC1 battery life runs up to 25 dives in diving mode or up to 3 months on standby.
- RS1001's R1000 first stage uses a balanced diaphragm design, and its high-flow low-pressure ports are built for up to a 15% increase in air flow; the RS1001 DIN version is rated to 300 bar (4350 psi).
- S0001 second stage has a lightweight composite case, an ambidextrous hose configuration, a venturi flow adjustment lever, and an ortho-conscious mouthpiece.
Compatibility and sizing
The Liberator BCD is offered in sizes XS through XL, each with its own lift capacity listed above, and the TC1 computer is offered in Black or White. TUSA manufactures the RS1001 regulator in both Yoke and DIN configurations; confirm which configuration ships with this package before ordering.
What's in the box
- Liberator BC0103B buoyancy compensator
- TC1 wrist dive computer
- RS1001 regulator with R1000 first stage and S0001 second stage
- SCA-270 compass and pressure gauge console
- Mesh backpack
DiveCatalog.com is an authorized TUSA dealer and a dive shop in Irvine, California, open since 2003. Call or chat with us at 888-701-4017 if you have questions about sizing or regulator configuration before you order.
- Wrap-around jacket style: the Liberator BCD uses a tilt valve inflator for buoyancy control.
- Advanced Weight Loading System III: weight cartridges load into the BCD, each rated to 8 lbs (3.63 kg).
- Ultimate Stabilizing Harness (U.S.H.): built into the Liberator to help keep the tank from rolling.
- O.P.E.V. system: TUSA's patented quick inflate and deflate valve design.
- DUO AIR II compatible: the Liberator BCD works with TUSA's DUO AIR II accessory.
- Dive modes: the TC1 supports Scuba, Plan, Free diving, and Gauge modes with audio, visual, and vibration alerts.
- Rechargeable Li-ion battery: the TC1 runs up to 25 dives in diving mode or up to 3 months on standby.
- Buhlmann ZHL-16C algorithm: the decompression algorithm built into the TC1 wrist computer.
- Balanced diaphragm first stage: the R1000 first stage in the RS1001 regulator has 2 high-pressure and 4 low-pressure ports, with high-flow LP ports built for up to a 15% increase in air flow.
- S0001 second stage: a lightweight composite case with an ambidextrous hose configuration, a venturi flow adjustment lever, and an ortho-conscious mouthpiece.
| Liberator BCD item number | BC0103B |
| Liberator BCD sizes | XS, S, M, L, XL |
| Liberator BCD exterior material | 500D Cordura |
| Liberator BCD interior material | 420D Nylon with urethane lamination |
| Liberator weight cartridge capacity | 8 lbs (3.63 kg) per cartridge |
| Liberator lift capacity, XS | 18 lbs (8.2 kg) |
| Liberator lift capacity, S | 22.5 lbs (10.2 kg) |
| Liberator lift capacity, M | 31.5 lbs (14.3 kg) |
| Liberator lift capacity, L | 38.2 lbs (17.3 kg) |
| Liberator lift capacity, XL | 46.1 lbs (20.9 kg) |
| Liberator BC weight (varies by size) | 7.1 to 7.7 lbs (3.2 to 3.5 kg) |
| TC1 item number | IQ1301 |
| TC1 battery | Rechargeable Li-ion, up to 25 dives in diving mode or up to 3 months standby |
| TC1 decompression algorithm | Buhlmann ZHL-16C |
| TC1 colors | Black, White |
| RS1001 item number | RS1001 (DIN version: RS1001 DIN) |
| R1000 first stage ports | 2 HP, 4 LP (2 standard, 2 high-flow) |
| R1000 high-flow LP port benefit | Up to 15% increase in air flow |
| RS1001 DIN rating | 300 bar / 4350 psi |
| S0001 second stage case | Lightweight composite |
- Liberator BC0103B buoyancy compensator
- TC1 wrist dive computer
- RS1001 regulator with R1000 first stage and S0001 second stage
- SCA-270 compass and pressure gauge console
- Mesh backpack
⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
How should a scuba BCD fit?
A BCD should fit snugly enough that it does not ride up toward your ears when inflated, while still letting you breathe fully. Fasten the waist and cummerbund first, then adjust the shoulder straps so the tank sits close to your back and the shoulders cannot slide off. With the BCD fully inflated at the surface you should still be able to take a deep, comfortable breath; if it squeezes your chest, loosen it or move up a size.
How do I rinse and care for a BCD after diving?
Rinse the outside in fresh water and also flush the inside of the bladder, because salt water gets in through the inflator and dump valves. Fill the bladder roughly a third full of fresh water through the oral inflator, slosh it around, then drain it out through the inflator and each dump valve. Hang it to dry out of direct sunlight and store it partially inflated so the bladder walls do not stick together.
Should I use integrated weights or a weight belt?
Integrated weight pockets carry the lead in the BCD itself, which many divers find more comfortable and easier on the hips, while a weight belt keeps the weight independent of your BCD. Either way, you must be able to release your ditchable weight quickly with one hand, and your buddy should know how your system releases. Non-ditchable trim pockets are useful for balance but should never hold weight you might need to drop.
How do I pack a BCD for travel?
Make sure the BCD is completely dry inside and out before packing so it does not mildew in transit. Remove all weights, deflate it fully, and fold or roll it around softer items such as a wetsuit to cushion the inflator and valves. Avoid hard creases in the air cell, and unpack and air it out as soon as you arrive.
When does a BCD need to be serviced?
Follow the service interval in the manufacturer's manual, which is commonly an annual inspection alongside the rest of your life-support gear. Have the inflator, dump valves, and bladder checked any time the inflator sticks, free-flows, feels rough, or the BCD holds air poorly. Between services, confirm that it inflates and deflates properly as part of every pre-dive check.
What is the difference between a jacket-style and a back-inflate BCD?
A jacket-style BCD holds air in panels that wrap around your sides as well as your back, while a back-inflate BCD keeps the entire air cell behind you. Jacket styles tend to feel very stable and upright at the surface, and back-inflate styles keep the chest clear and are often preferred for horizontal trim underwater. Neither is objectively better, so treat it as a fit and preference decision and try both if you can.
Will my BCD fit any scuba tank?
Most recreational BCDs use an adjustable cam band sized for common single-cylinder diameters, so standard aluminum and steel tanks generally work. Re-check the band tension after the first wetting, because webbing can relax slightly and let the tank shift. If you dive doubles or unusual cylinder diameters, confirm compatibility with the manufacturer before assuming it will hold.
Is the RS1001 regulator in this package a Yoke or DIN connection?
TUSA manufactures the RS1001 in both Yoke and DIN configurations, with the DIN version (RS1001 DIN) rated to 300 bar (4350 psi). Because this package bundles separately sold TUSA items, confirm which configuration is included before you order so it matches your tank valve.
How long does the TC1 dive computer's battery last?
The TC1 uses a rechargeable Li-ion battery rated for up to 25 dives in diving mode or up to 3 months on standby.
What comes in the Tusa Liberator TC1 Diving Package?
The package includes the Liberator BC0103B buoyancy compensator, the TC1 wrist dive computer, the RS1001 regulator with its R1000 first stage and S0001 second stage, the SCA-270 compass and pressure gauge console, and a mesh backpack.
What size Liberator BCD do I need and how much lift does it provide?
The Liberator BCD is offered in XS, S, M, L, and XL. Lift capacity scales with size, from 18 lbs (8.2 kg) in XS up to 46.1 lbs (20.9 kg) in XL, so choose the size that matches your body and the lift your gear configuration requires.













