Free Shipping on Most Orders Over $50 | Get up to 5% cashback | Need It Today? Same-Day Delivery Within 50 Miles

Scubapro MK2 EVO/S270

Scubapro  |  SKU: 12.127.000
Refer & Earn
Regular price $599.00
Shipping calculated at checkout.

In stock — ships from Irvine, CA



Pickup available at In Store

Usually ready in 2 hours


Pick accessories — 90% off with your $250+ order

and your picks are free.

 

Start  $501 pick $1252 picks
  • DiveCatalog Moldable Mouthpiece w/ installation for Regulators

    $34.95$3.50

    1
  • DiveCatalog.com Upside Down Drysuit Hanger w/ Regulator and Accessory Hooks

    $29.95$3.00

    1
  • DiveCatalog.com Universal Dive Gear Hanger with Accessory Arms fits Wetsuits, Drysuits, BCDs, Backpacks

    $29.95$3.00

    1
  • DiveCatalog.com Small Retractor

    $24.95$2.50

    1
  • DiveCatalog.com Heavy Duty Wetsuit and Drysuit Hanger with Extra Wide Shoulder Saver

    $22.95$2.30

    1


Payment & Security

Payment methods

  • Amazon
  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Product Information

The SCUBAPRO MK2 EVO/S270 is a regulator system that pairs the MK2 EVO piston first stage with the S270 air-balanced second stage, built with a chrome-plated brass first stage, a reinforced technopolymer second-stage casing, and Nitrox compatibility up to 40% oxygen. This listing is the INT (Yoke) connector version, SKU 12.127.000.

Who it is for

This system suits divers looking for a step up from entry-level gear who want an air-balanced second stage for consistent breathing performance and a first stage with enough port placement to route hoses the way their configuration requires. It is built for cold and temperate water use.

Key details

  • First stage: piston-type, chrome-plated brass, with 1 high-pressure port and 4 low-pressure ports
  • Second stage: S Series, air-balanced valve, reinforced technopolymer casing with a fiberglass-reinforced nylon core and PU outer layer
  • Connector: INT (Yoke); a DIN 300 version is offered as a separate SKU
  • Nitrox compatible up to 40% oxygen
  • XTIS (Extended Thermal Insulating System) for resistance to freezing in extreme cold-water conditions
  • Dive/predive switch, usable with gloves, to help prevent free flows
  • Oversized piston for increased airflow and a compact exhaust tee
  • Weight: 3.073 lb
  • Backed by SCUBAPRO's limited lifetime warranty

What's in the box

  • MK2 EVO INT first stage
  • S270 second stage
  • 4mm Allen key
  • Manual

DiveCatalog.com is an authorized SCUBAPRO dealer and a dive shop in Irvine, California, serving divers since 2003. Call 888-701-4017 or chat with us if you have questions about fit, connector type, or compatibility with your current gear.

⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

Frequently Asked Questions

How often does a scuba regulator need servicing?

Follow the interval in your regulator's manual, since manufacturers commonly specify an annual inspection or a set number of dives and many warranties depend on it. A regulator is life-support equipment, so service belongs with a factory-trained technician rather than being attempted at home. Have it looked at sooner than scheduled if you notice increased breathing effort, free-flow, bubbles, or water in the second stage.

How do I rinse and care for a regulator after diving?

Make sure the dust cap is dry and firmly seated over the first-stage inlet before the regulator goes anywhere near water, because water inside the first stage is the leading cause of internal corrosion. Rinse in fresh water without pressing the purge button, since purging while depressurized can draw water back into the second stage. Shake out the water and hang it to dry with the hoses in wide, gentle loops rather than tight bends.

Can I fly with a scuba regulator?

Regulators travel well and are usually best carried in hand luggage where they will not be crushed or lost. A regulator holds no gas of its own, so there is nothing inherently problematic about it on an aircraft, though the airline and security screeners always have the final say. Pack it dry with the dust cap in place, in a padded regulator bag or wrapped in soft gear.

Can I use my regulator with nitrox?

Many modern regulators are supplied as suitable for nitrox mixes up to 40 percent oxygen, which is the widely used recreational industry standard, while anything above that requires dedicated oxygen-clean equipment and procedures. Confirm what your specific regulator's manual states, and follow your nitrox training and your fill station's requirements. Never assume a regulator is oxygen-service clean simply because it looks clean or is new.

What is the difference between DIN and yoke regulators?

A yoke (A-clamp) fitting clamps over the tank valve and is the most common connection across much of the recreational world, while a DIN fitting screws into the valve and is standard in much of Europe and in technical diving. DIN captures the o-ring inside the threads, which many divers consider more secure, but yoke is often what rental cylinders provide. Adapters exist in both directions, so check what is used where you dive before deciding.

What is the octopus regulator for?

The octopus is your backup second stage, carried so you can share air with a buddy who is out of gas, or breathe from it yourself if your primary fails or free-flows. It is normally on a longer, brightly colored hose so it is easy to find and hand over under stress. Secure it in the triangle between your chin and the bottom of your rib cage so it is instantly accessible and not dragging through sand or coral.

How should I store a regulator between dive trips?

Store it fully dry, out of sunlight, with the dust cap in place and the hoses in wide loops rather than tightly coiled. Avoid hanging it by the second stages for long periods, which stresses the hose fittings; laying it flat in a padded bag or hanging it by the first stage is kinder. If it has sat unused for a long stretch, have it checked before your next trip rather than assuming it is ready to dive.

Is the MK2 EVO/S270 available in DIN?

Yes. This listing is the INT (Yoke) connector version, SKU 12.127.000. SCUBAPRO also offers the same first and second stage combination as a DIN 300 connector version under a separate SKU, 12.127.300, for divers who need a DIN fitting.

What comes in the box with the MK2 EVO/S270?

The box includes the MK2 EVO INT first stage, the S270 second stage, a 4mm Allen key, and the owner's manual. Hoses are not listed as included components, so confirm hose configuration needs before purchase.

How many ports does the MK2 EVO first stage have?

The MK2 EVO first stage has 1 high-pressure port and 4 low-pressure ports, allowing flexible hose routing for a gauge, inflator, octopus, and primary second stage.

How much does the MK2 EVO/S270 weigh?

The MK2 EVO/S270 system weighs 3.073 lb as published by SCUBAPRO.

  • 5 stars: 1 (100%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
V
Vincentsd9
Nice feeling quality and fits well

Nice feeling quality and fits well. Haven’t been through my open water class yet but excited to have my own reg to use.