Free Shipping on Most Orders Over $50 | Get up to 5% cashback | Need It Today? Same-Day Delivery Within 50 Miles

Scubapro MK11 EVO 1st Stage Regulator

Scubapro  |  SKU: 10.011.300
Refer & Earn
Regular price $409.00
Shipping calculated at checkout.

In stock — ships from Irvine, CA


Type

Pickup available at In Store

Usually ready in 2 hours


Pick accessories — 90% off with your $50+ order

and your picks are free.

 

Start  $501 pick $1252 picks
  • DiveCatalog DIN Cap for 1st Stage (Female) for Scuba Diving Tanks - Scuba Essentials

    $19.95$2.00

    1
  • DiveCatalog Hose Clamp for Scuba Diving - Scuba Essentials

    $17.95$1.80

    1
  • DiveCatalog Neoprene Mask Strap Cover

    $17.00$1.70

    1
  • DiveCatalog Silicone Mouthpiece Replacement w/ installation - Scuba Essentials

    $14.95$1.50

    1
  • DiveCatalog Rubber Tank Valve Protector for Scuba Diving Tanks - Scuba Essentials

    $11.95$1.20

    1


Payment & Security

Payment methods

  • Amazon
  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Product Information

The Scubapro MK11 EVO 1st Stage Regulator is a compact, air-balanced diaphragm first stage sold on its own, available in DIN and Yoke (INT) tank-connector versions, with a forged, chrome-plated brass body and a nitrox rating up to 40%.

Who it is for

This first stage is for divers who want to build or upgrade a regulator setup and need a first stage that can be paired with a compatible second stage. It is offered as a first-stage-only purchase in DIN or Yoke configuration, so divers can match it to their existing tank valve and second stage.

Key details

The MK11 EVO uses an air-balanced diaphragm design to help maintain consistent performance, backed by an innovative double spring layout that adds performance while keeping the first stage compact. The body is forged, chrome-plated brass with metal thermal fins to improve heat exchange, and plastic bumpers protect the housing from scratches. It has 2 high-pressure ports set at a 15-degree angle in an opposing configuration for convenient hose routing, plus 4 high-flow low-pressure ports to maximize hose placement options. It is CE certified to EN250A European Standards and is rated for nitrox mixes up to 40%.

Compatibility and sizing

The MK11 EVO first stage is available in two tank-connector versions: DIN (SKU 10.011.300) and Yoke/INT (SKU 10.011.000). Choose the version that matches your tank valve.

DiveCatalog.com is an authorized Scubapro dealer and a dive shop in Irvine, California, serving divers since 2003. Call 888-701-4017 or start a chat if you have questions about fit, DIN versus Yoke, or second-stage compatibility before you order.

⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

Frequently Asked Questions

How often does a scuba regulator need servicing?

Follow the interval in your regulator's manual, since manufacturers commonly specify an annual inspection or a set number of dives and many warranties depend on it. A regulator is life-support equipment, so service belongs with a factory-trained technician rather than being attempted at home. Have it looked at sooner than scheduled if you notice increased breathing effort, free-flow, bubbles, or water in the second stage.

How do I rinse and care for a regulator after diving?

Make sure the dust cap is dry and firmly seated over the first-stage inlet before the regulator goes anywhere near water, because water inside the first stage is the leading cause of internal corrosion. Rinse in fresh water without pressing the purge button, since purging while depressurized can draw water back into the second stage. Shake out the water and hang it to dry with the hoses in wide, gentle loops rather than tight bends.

Can I fly with a scuba regulator?

Regulators travel well and are usually best carried in hand luggage where they will not be crushed or lost. A regulator holds no gas of its own, so there is nothing inherently problematic about it on an aircraft, though the airline and security screeners always have the final say. Pack it dry with the dust cap in place, in a padded regulator bag or wrapped in soft gear.

Can I use my regulator with nitrox?

Many modern regulators are supplied as suitable for nitrox mixes up to 40 percent oxygen, which is the widely used recreational industry standard, while anything above that requires dedicated oxygen-clean equipment and procedures. Confirm what your specific regulator's manual states, and follow your nitrox training and your fill station's requirements. Never assume a regulator is oxygen-service clean simply because it looks clean or is new.

What is the difference between DIN and yoke regulators?

A yoke (A-clamp) fitting clamps over the tank valve and is the most common connection across much of the recreational world, while a DIN fitting screws into the valve and is standard in much of Europe and in technical diving. DIN captures the o-ring inside the threads, which many divers consider more secure, but yoke is often what rental cylinders provide. Adapters exist in both directions, so check what is used where you dive before deciding.

What is the octopus regulator for?

The octopus is your backup second stage, carried so you can share air with a buddy who is out of gas, or breathe from it yourself if your primary fails or free-flows. It is normally on a longer, brightly colored hose so it is easy to find and hand over under stress. Secure it in the triangle between your chin and the bottom of your rib cage so it is instantly accessible and not dragging through sand or coral.

How should I store a regulator between dive trips?

Store it fully dry, out of sunlight, with the dust cap in place and the hoses in wide loops rather than tightly coiled. Avoid hanging it by the second stages for long periods, which stresses the hose fittings; laying it flat in a padded bag or hanging it by the first stage is kinder. If it has sat unused for a long stretch, have it checked before your next trip rather than assuming it is ready to dive.

Does the MK11 EVO first stage come with a second stage?

No. This listing is the MK11 EVO first stage only, sold without a second stage. It is designed to be paired with a compatible second stage, such as the R105, C370, or S270, which you select separately based on your preferred regulator configuration.

What is the difference between the DIN and Yoke versions of the MK11 EVO?

The DIN version (SKU 10.011.300) has a connector that screws directly into the tank valve, while the Yoke/INT version (SKU 10.011.000) clamps over the valve. The MK11 EVO is published in DIN and INT (Yoke) tank-connector versions; choose the one matching your tank valve.

Is the MK11 EVO certified for use outside the US?

Yes. The MK11 EVO is CE certified to EN250A European Standards, which is the certification referenced on Scubapro's manufacturer pages for this first stage.

What warranty covers the MK11 EVO first stage?

Scubapro states its regulators, including the MK11 EVO, are covered by a limited lifetime warranty. Refer to Scubapro's warranty terms for full details on coverage and any required maintenance.