Open Box AKONA 6mm Nomad Deluxe Boot
In stock — ships from Irvine, CA
This item is currently on backorder. Order now to reserve yours, and we will ship it as soon as it is back in stock.
Open Box AKONA 6mm Nomad Deluxe Boot - 09 is backordered and will ship as soon as it is back in stock.
Pickup available at In Store
Usually ready in 2 hours
Condition Note
- Open Box: This product is Open Box. It is generally unused, either returned by a customer or displayed in our showroom, and may have minor, unnoticeable blemishes. Original packaging may be damaged or missing.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Save with Open Box or Used Purchase
Product Information
The AKONA 6mm Nomad Deluxe Boot is a tall neoprene dive boot built with protective toe and heel caps, anti-slip and anti-skid soles, and vertical nylon webbing up the back, offered in sizes 04, 05, 06, 07, 08, 09, 10, 12, 13, 14, and 15.
Who it is for
This boot suits divers who want a tall, durable boot for beach and boat diving, with reinforced seams at the toe and heel for added strength and a pull-loop that makes the boot easier to put on.
Key details
- Thickness: 6mm neoprene (AKONA also offers this style in 3.5mm).
- Materials: Earth Friendly Neoprene assembled with water based glue.
- Sole: Anti-slip, anti-skid sole designed for use on beach or boat.
- Construction: Protective toe and heel caps add strength to the seams, and vertical nylon webbing runs up the back of the boot for durability during wear.
- Design: Clean exterior with a pull-loop for ease when donning.
Compatibility and sizing
This 6mm Nomad boot is available in sizes 04, 05, 06, 07, 08, 09, 10, 12, 13, 14, and 15. AKONA's Nomad Tall Boot line is also offered in a 3.5mm thickness for divers who want a thinner option.
DiveCatalog.com is an authorized AKONA dealer and a dive shop in Irvine, California, open since 2003. Call or chat with us at 888-701-4017 if you have questions about sizing or fit before you order.
⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
What thickness of dive boots, gloves, or hood should I choose?
As a general rule, thicker neoprene insulates more, so colder water pushes you toward thicker accessories, but fit, dive length, and personal cold tolerance matter as much as the millimeter number. Divers commonly lose a great deal of heat through the head, so a hood is often the highest-value warmth upgrade for the money. Remember that every added piece of neoprene also adds buoyancy you will need to account for.
How should dive boots fit?
Boots should fit like a snug athletic shoe, with no heel lift and no crushed toes; a little water inside is normal, a sloshing pocket is not. Try them on with the socks you would actually dive, and remember your fin foot pocket has to accommodate the boot. Hard-sole boots protect on rocky shore entries, while soft-sole boots are lighter and pack smaller for boat and travel diving.
How should dive gloves fit?
Gloves should be snug across the palm with fingertips reaching the ends without bunching, since trapped air and loose fingertips destroy dexterity. Thicker gloves are warmer but make buckles, clips, and inflator buttons harder to operate, so choose the thinnest glove that keeps you comfortable in your conditions. Try working a clip or buckle while wearing them before you commit.
How should a dive hood fit?
A hood should seal around the face and neck without restricting your throat or jaw, and lie flat on your head without pulling the mask strap out of position. A loose hood flushes cold water continuously, while an overly tight one is distracting and uncomfortable. Many hoods have a vent to release air trapped during descent, so check yours and burp out any trapped air before you go down.
Why does new neoprene feel so tight?
New neoprene compresses and relaxes with use, so a boot, glove, or hood that feels firm out of the packaging usually settles slightly after a few dives. It should still be snug afterward rather than loose, because neoprene that stretches into a loose fit was probably oversized to begin with. Buy for a snug fit when new, but never for a fit that restricts circulation or breathing.
Do I need to change my weighting when I add a hood, gloves, and boots?
Yes, because every piece of neoprene you add is buoyancy, and a hood, boots, and thick gloves together can shift your weighting noticeably. Do a proper buoyancy check any time you change your exposure protection rather than assuming your usual weight still works. The weight-check procedure is covered in your training, and a dive professional can help you re-do it.
How do I care for dive boots, gloves, and hoods?
Rinse them inside and out in fresh water after every dive day, since they hold sweat and salt more than any other gear, and dry them fully inside-out before packing. Dry them out of direct sunlight and never on a heater, because heat hardens neoprene and weakens glued seams. Store them dry and unfolded, as damp neoprene sealed in a bag is how gear picks up a permanent smell.
What sizes does the AKONA 6mm Nomad Deluxe Boot come in?
This boot is available in sizes 04, 05, 06, 07, 08, 09, 10, 12, 13, 14, and 15.
Is the AKONA Nomad boot available in a thinner option?
Yes, AKONA offers the Nomad Tall Boot in a 3.5mm thickness in addition to this 6mm version.
What material is the AKONA Nomad boot made from?
The boot is made from Earth Friendly Neoprene assembled with water based glue. It also features protective toe and heel caps and vertical nylon webbing up the back for added seam strength and durability.
Are these boots designed for beach entries or boat diving?
Yes, the AKONA Nomad boot has anti-slip and anti-skid soles specifically designed for use on both beach and boat, making it suitable for walking on sand or boat decks before and after a dive.












