Atomic Aquatics B2 Regulator, DIN with Color Kit and Z2 Octo Scuba Diving Package
Atomic Aquatics B2 Regulator, DIN with Color Kit and Z2 Octo Scuba Diving Package - DIN / Black is backordered and will ship as soon as it is back in stock.
Pickup currently unavailable at In Store
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Product Information
The Atomic Aquatics B2 Regulator, DIN with Color Kit and Z2 Octo is a scuba diving regulator package that pairs a Chrome-plated Brass and 316 Stainless Steel first stage with an All-Titanium second stage, bundled with the Z2 Octo backup second stage. The B2 first stage uses Atomic Aquatics' balanced Jet Seat high-flow piston design and is approved for non-dedicated EAN use with nitrox mixtures up to 40% oxygen.
Who it is for
This package suits divers wanting a matched primary and backup second stage, including those using nitrox mixtures up to 40% oxygen.
Key details
- B2 first stage: Chrome-plated Brass and 316 Stainless Steel construction with 2 HP fixed and 5 LP ports on a swivel cap.
- B2 second stage: All-Titanium construction with a pneumatically-balanced poppet, patented Automatic Flow Control (AFC), a soft overmolded Rapid Adjustment Knob, and a patented Titanium Seat Saving Dynamic Orifice.
- Comfort features: polished 316 Stainless Steel Comfort Swivel with Black PVD coating, dual-material second stage cover, elliptical exhaust valve, and a dual silicone comfort-fit mouthpiece with tear-resistant bite tabs.
- Z2 Octo: Brass body with zirconium-over-chrome-over-brass plating, titanium lever, orifice, and spring, a 36-inch hose, and the same AFC and Titanium Seat Saving Dynamic Orifice technology as the B2 second stage.
- Nitrox rating: approved for non-dedicated EAN use with mixtures up to 40% oxygen.
Compatibility and sizing
This package is set up with a DIN first stage. The B2 first stage is also offered by the manufacturer in DIN Sealed, Yoke, and Yoke Sealed configurations. The Z2 Octo is built as a clone of Atomic Aquatics' primary second stage, so it is designed to pair with any Atomic Aquatics primary regulator, including the B2 in this package. An optional color kit lets you customize the regulator's appearance.
Who backs it
Atomic Aquatics covers this package with a Limited Lifetime Warranty: all metal parts are warranted against corrosion for life, titanium components are warranted for the lifetime of the original owner against corrosion, and mouthpieces, hoses, o-rings, filters, and valve seats carry a 2-year warranty. The manufacturer recommends service every 2 years or 300 dives.
DiveCatalog.com is an authorized Atomic Aquatics dealer and a dive shop in Irvine, California since 2003. Call 888-701-4017 or chat with us if you have questions about DIN versus yoke fit, color options, or compatibility with your current setup.
- Chrome-plated Brass and 316 Stainless Steel first stage built for durability in saltwater gear setups.
- Balanced Jet Seat high-flow piston is an Atomic Aquatics exclusive design for consistent breathing performance.
- Optional factory-sealed configuration helps prevent outside contamination from silt and sand during dives.
- Nitrox ready for non-dedicated EAN use with mixtures up to 40% oxygen.
- First stage ports include 2 HP fixed and 5 LP on a swivel cap for flexible hose routing.
- All-Titanium second stage with a pneumatically-balanced poppet and high-flow case and lever design.
- Patented Automatic Flow Control (AFC) maintains stable breathing characteristics under varying conditions.
- Soft overmolded Rapid Adjustment Knob allows manual detuning in special situations.
- Patented Titanium Seat Saving Dynamic Orifice preserves factory tuning and protects components.
- Polished 316 Stainless Steel Comfort Swivel with Black PVD coating adds durability and comfort.
- Z2 Octo backup second stage uses a zirconium-over-chrome-over-brass plated brass body with titanium lever, orifice, and spring, and a 36-inch hose.
- Optional color kit is available to customize the package's appearance.
| First Stage Material | Chrome-plated Brass and 316 Stainless Steel |
| Second Stage Material | All-Titanium construction |
| First Stage Ports | 2 HP fixed / 5 LP on swivel cap |
| Nitrox Rating | Approved for non-dedicated EAN use up to 40% oxygen |
| First Stage Configuration (this package) | DIN |
| First Stage Options (manufacturer range) | DIN, DIN Sealed, Yoke, Yoke Sealed |
| Second Stage Swivel | Polished 316 Stainless Steel Comfort Swivel with Black PVD coating |
| Octo Model | Z2 Octo |
| Octo Hose Length | 36 inches |
| Octo Material | Brass body with zirconium-over-chrome-over-brass plating; titanium lever, orifice, and spring |
| Color Options | Black, Gray, Royal Blue, Yellow, Red, Aqua, Pink, Purple |
| Warranty | Limited Lifetime Warranty; metal parts warranted against corrosion for life; titanium components warranted for lifetime of original owner against corrosion; mouthpieces, hoses, o-rings, filters, and valve seats warranted for 2 years |
| Recommended Service Interval | 2 years or 300 dives |
⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
How often does a scuba regulator need servicing?
Follow the interval in your regulator's manual, since manufacturers commonly specify an annual inspection or a set number of dives and many warranties depend on it. A regulator is life-support equipment, so service belongs with a factory-trained technician rather than being attempted at home. Have it looked at sooner than scheduled if you notice increased breathing effort, free-flow, bubbles, or water in the second stage.
How do I rinse and care for a regulator after diving?
Make sure the dust cap is dry and firmly seated over the first-stage inlet before the regulator goes anywhere near water, because water inside the first stage is the leading cause of internal corrosion. Rinse in fresh water without pressing the purge button, since purging while depressurized can draw water back into the second stage. Shake out the water and hang it to dry with the hoses in wide, gentle loops rather than tight bends.
Can I fly with a scuba regulator?
Regulators travel well and are usually best carried in hand luggage where they will not be crushed or lost. A regulator holds no gas of its own, so there is nothing inherently problematic about it on an aircraft, though the airline and security screeners always have the final say. Pack it dry with the dust cap in place, in a padded regulator bag or wrapped in soft gear.
Can I use my regulator with nitrox?
Many modern regulators are supplied as suitable for nitrox mixes up to 40 percent oxygen, which is the widely used recreational industry standard, while anything above that requires dedicated oxygen-clean equipment and procedures. Confirm what your specific regulator's manual states, and follow your nitrox training and your fill station's requirements. Never assume a regulator is oxygen-service clean simply because it looks clean or is new.
What is the difference between DIN and yoke regulators?
A yoke (A-clamp) fitting clamps over the tank valve and is the most common connection across much of the recreational world, while a DIN fitting screws into the valve and is standard in much of Europe and in technical diving. DIN captures the o-ring inside the threads, which many divers consider more secure, but yoke is often what rental cylinders provide. Adapters exist in both directions, so check what is used where you dive before deciding.
What is the octopus regulator for?
The octopus is your backup second stage, carried so you can share air with a buddy who is out of gas, or breathe from it yourself if your primary fails or free-flows. It is normally on a longer, brightly colored hose so it is easy to find and hand over under stress. Secure it in the triangle between your chin and the bottom of your rib cage so it is instantly accessible and not dragging through sand or coral.
How should I store a regulator between dive trips?
Store it fully dry, out of sunlight, with the dust cap in place and the hoses in wide loops rather than tightly coiled. Avoid hanging it by the second stages for long periods, which stresses the hose fittings; laying it flat in a padded bag or hanging it by the first stage is kinder. If it has sat unused for a long stretch, have it checked before your next trip rather than assuming it is ready to dive.
What colors are available for the B2 Regulator color kit?
This package is available in Black, Gray, Royal Blue, Yellow, Red, Aqua, Pink, and Purple color kit options, letting you customize the regulator's appearance. The color kit is an optional accessory offered alongside the standard Chrome-plated Brass first stage and All-Titanium second stage.
Is the Z2 Octo being replaced by a newer model?
Yes. Atomic Aquatics' product page states the Z2 Octo is currently being transitioned to the updated Z3 Octopus and lists it as out of stock.
How long is the hose on the Z2 Octo included in this package?
The Z2 Octo has a 36-inch hose. This length is part of the manufacturer's published specification for the Z2 Octo and applies to the octopus included in this B2 and Z2 package.
What warranty covers this B2 and Z2 Octo package?
Atomic Aquatics backs this package with a Limited Lifetime Warranty. All metal parts are warranted against corrosion for life, titanium components are warranted for the lifetime of the original owner against corrosion, and mouthpieces, hoses, o-rings, filters, and valve seats are warranted for 2 years. The manufacturer recommends service every 2 years or 300 dives.
























