Sea & Sea YS-03 Solis (Does Not Include Fiber Optic Cable)
Sea & Sea YS-03 Solis (Does Not Include Fiber Optic Cable) is backordered and will ship as soon as it is back in stock.
Pickup currently unavailable at In Store
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Save with Open Box or Used Purchase
Product Information
The Sea & Sea YS-03 Solis is a compact slave-TTL underwater strobe built for divers who want automatic TTL flash exposure without manually dialing in output. It carries a guide number of 20 (ISO 100/m, land), a single OFF to TTL rotary switch, and a 75m depth rating. This listing does not include the fiber-optic sync cable, which is required to connect the strobe to a camera and must be purchased separately.
Who it is for
The YS-03 Solis suits underwater photographers who want simple, beginner-friendly strobe lighting rather than manual flash control. Because it mimics the light intensity of a camera's built-in flash, it works with any camera, regardless of make, that has a pre-flash and TTL flash exposure function. It is a good fit for divers moving up from a built-in flash who want more even, diffused lighting without learning manual strobe settings.
Key details
- Guide number: 20 (ISO 100/m, land)
- Beam angle: 100° x 100°, or 110° x 110° with the diffuser
- Batteries: 4 x AA, alkaline (6V) or Ni-MH (4.8V)
- Flash count: approximately 230 with alkaline, 300 with Ni-MH (2500mAh)
- Recycle time: 2.5 seconds alkaline, 1.9 seconds Ni-MH
- Color temperature: 5600K, or 5250K with the diffuser fitted
- Depth rating: 75m
- Dimensions: 68mm x 108mm x 129mm
- Weight: 430g body only, excluding batteries, with fixing bolt fitted; approximately +10g underwater with batteries installed
Compatibility and sizing
The YS-03 Solis is designed to sync with any camera that has a pre-flash and a TTL flash exposure function. It requires a fiber-optic sync cable to communicate with the camera's built-in flash; this cable is not included with this listing and must be sourced separately before the strobe can be used.
What's in the box
- Fixing/mounting bolt
- Half-translucent diffuser
DiveCatalog.com is an authorized Sea & Sea dealer and a dive shop in Irvine, California since 2003. Call or chat with us at 888-701-4017 if you have questions about fit, compatibility, or whether you need the fiber-optic cable for your camera setup.
- Slave TTL operation: Mimics the light output, distribution and recycle method of the higher-end YS-01 SOLIS, so no manual output adjustment is needed.
- Single switch control: One rotary OFF to TTL switch is the only control needed to take TTL-exposed images.
- Universal camera compatibility: Works with any camera, regardless of make, that has a pre-flash and a TTL flash exposure function.
- Included diffuser: A half-translucent diffuser panel softens and diffuses light, reducing output by 1EV (guide number 20 to 14) for more evenly exposed images.
- Status indicators: A red ready light shows the flash is charged; a green signal confirms sync with the camera's built-in flash.
- Auto power off: Automatically powers down to conserve battery life.
- Over-pressure relief valve: Built in for added safety against internal pressure buildup.
- Depth rated to 75m: Housing is rated for use to 75 meters.
- Flexible battery options: Runs on 4 x AA batteries, either alkaline or Ni-MH.
| Guide Number (ISO 100/m, land) | 20 |
| Beam Angle | 100° x 100° (110° x 110° with diffuser) |
| Batteries | 4 x AA; Alkaline: 6V, Ni-MH: 4.8V |
| Number of Flashes | Alkaline: 230, Ni-MH (2500mAh): 300 |
| Recycle Time (full) | Alkaline: 2.5 sec. Ni-MH: 1.9 sec. |
| Color Temperature | 5600K |
| Color Temperature (with diffuser) | 5250K |
| Depth Rating | 75m / 250ft |
| Dimensions (WxHxD) | 68mm x 108mm x 129mm / 2.7in x 4.3in x 5.2in |
| Weight | 430g / 15.2oz, body only, excluding batteries, fixing bolt fitted |
| Underwater Weight | Approx. +10g / 0.4oz with batteries |
| Sync Method | Fiber-optic cable (not included) |
| Other Functions | Auto power off, over-pressure relief valve |
- Fixing/mounting bolt
- Half-translucent diffuser
⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
Does the Sea & Sea YS-03 Solis include the fiber-optic sync cable?
No. Per the manufacturer, the fiber-optic sync cable is not included with the YS-03 Solis strobe and must be purchased separately. The cable is required to connect the strobe to your camera's built-in flash for TTL sync, so factor it into your setup before diving.
Is the Sea & Sea YS-03 Solis discontinued?
Yes. The manufacturer's product page lists the YS-03 Solis as a discontinued, end-of-production item, with no replacement model stated. Both the standalone strobe and the YS-03 Solis Lighting System bundle are marked discontinued by Sea & Sea.
What batteries does the YS-03 Solis strobe use, and how many flashes do they give?
The YS-03 Solis runs on 4 x AA batteries, either alkaline (6V) or Ni-MH (4.8V). Alkaline batteries yield approximately 230 flashes per set, while 2500mAh Ni-MH batteries yield approximately 300 flashes, with recycle times of 2.5 seconds and 1.9 seconds respectively.
Will the YS-03 Solis work with my camera?
The YS-03 Solis is designed to sync with any camera, regardless of brand, that has a pre-flash and a TTL flash exposure function. It mimics the output of that built-in flash automatically. You will still need a fiber-optic sync cable, sold separately, to connect it to your specific camera housing.














