Sea & Sea YS-03 Solis (Does Not Include Fiber Optic Cable)
Sea & Sea YS-03 Solis (Does Not Include Fiber Optic Cable) is backordered and will ship as soon as it is back in stock.
Pickup currently unavailable at In Store
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Product Information
The Sea & Sea YS-03 Solis is a compact slave-TTL underwater strobe built for divers who want automatic TTL flash exposure without manually dialing in output. It carries a guide number of 20 (ISO 100/m, land), a single OFF to TTL rotary switch, and a 75m depth rating. This listing does not include the fiber-optic sync cable, which is required to connect the strobe to a camera and must be purchased separately.
Who it is for
The YS-03 Solis suits underwater photographers who want simple, beginner-friendly strobe lighting rather than manual flash control. Because it mimics the light intensity of a camera's built-in flash, it works with any camera, regardless of make, that has a pre-flash and TTL flash exposure function. It is a good fit for divers moving up from a built-in flash who want more even, diffused lighting without learning manual strobe settings.
Key details
- Guide number: 20 (ISO 100/m, land)
- Beam angle: 100° x 100°, or 110° x 110° with the diffuser
- Batteries: 4 x AA, alkaline (6V) or Ni-MH (4.8V)
- Flash count: approximately 230 with alkaline, 300 with Ni-MH (2500mAh)
- Recycle time: 2.5 seconds alkaline, 1.9 seconds Ni-MH
- Color temperature: 5600K, or 5250K with the diffuser fitted
- Depth rating: 75m
- Dimensions: 68mm x 108mm x 129mm
- Weight: 430g body only, excluding batteries, with fixing bolt fitted; approximately +10g underwater with batteries installed
Compatibility and sizing
The YS-03 Solis is designed to sync with any camera that has a pre-flash and a TTL flash exposure function. It requires a fiber-optic sync cable to communicate with the camera's built-in flash; this cable is not included with this listing and must be sourced separately before the strobe can be used.
What's in the box
- Fixing/mounting bolt
- Half-translucent diffuser
DiveCatalog.com is an authorized Sea & Sea dealer and a dive shop in Irvine, California since 2003. Call or chat with us at 888-701-4017 if you have questions about fit, compatibility, or whether you need the fiber-optic cable for your camera setup.
- Slave TTL operation: Mimics the light output, distribution and recycle method of the higher-end YS-01 SOLIS, so no manual output adjustment is needed.
- Single switch control: One rotary OFF to TTL switch is the only control needed to take TTL-exposed images.
- Universal camera compatibility: Works with any camera, regardless of make, that has a pre-flash and a TTL flash exposure function.
- Included diffuser: A half-translucent diffuser panel softens and diffuses light, reducing output by 1EV (guide number 20 to 14) for more evenly exposed images.
- Status indicators: A red ready light shows the flash is charged; a green signal confirms sync with the camera's built-in flash.
- Auto power off: Automatically powers down to conserve battery life.
- Over-pressure relief valve: Built in for added safety against internal pressure buildup.
- Depth rated to 75m: Housing is rated for use to 75 meters.
- Flexible battery options: Runs on 4 x AA batteries, either alkaline or Ni-MH.
| Guide Number (ISO 100/m, land) | 20 |
| Beam Angle | 100° x 100° (110° x 110° with diffuser) |
| Batteries | 4 x AA; Alkaline: 6V, Ni-MH: 4.8V |
| Number of Flashes | Alkaline: 230, Ni-MH (2500mAh): 300 |
| Recycle Time (full) | Alkaline: 2.5 sec. Ni-MH: 1.9 sec. |
| Color Temperature | 5600K |
| Color Temperature (with diffuser) | 5250K |
| Depth Rating | 75m / 250ft |
| Dimensions (WxHxD) | 68mm x 108mm x 129mm / 2.7in x 4.3in x 5.2in |
| Weight | 430g / 15.2oz, body only, excluding batteries, fixing bolt fitted |
| Underwater Weight | Approx. +10g / 0.4oz with batteries |
| Sync Method | Fiber-optic cable (not included) |
| Other Functions | Auto power off, over-pressure relief valve |
- Fixing/mounting bolt
- Half-translucent diffuser
⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
Does the Sea & Sea YS-03 Solis include the fiber-optic sync cable?
No. Per the manufacturer, the fiber-optic sync cable is not included with the YS-03 Solis strobe and must be purchased separately. The cable is required to connect the strobe to your camera's built-in flash for TTL sync, so factor it into your setup before diving.
Is the Sea & Sea YS-03 Solis discontinued?
Yes. The manufacturer's product page lists the YS-03 Solis as a discontinued, end-of-production item, with no replacement model stated. Both the standalone strobe and the YS-03 Solis Lighting System bundle are marked discontinued by Sea & Sea.
What batteries does the YS-03 Solis strobe use, and how many flashes do they give?
The YS-03 Solis runs on 4 x AA batteries, either alkaline (6V) or Ni-MH (4.8V). Alkaline batteries yield approximately 230 flashes per set, while 2500mAh Ni-MH batteries yield approximately 300 flashes, with recycle times of 2.5 seconds and 1.9 seconds respectively.
Will the YS-03 Solis work with my camera?
The YS-03 Solis is designed to sync with any camera, regardless of brand, that has a pre-flash and a TTL flash exposure function. It mimics the output of that built-in flash automatically. You will still need a fiber-optic sync cable, sold separately, to connect it to your specific camera housing.














