Scubapro S-TEK Donut Wing 40 + S-TEK Pro Harness SS + Back Shoulder Waist Pad
Scubapro S-TEK Donut Wing 40 + S-TEK Pro Harness SS + Back Shoulder Waist Pad - Army Green is backordered and will ship as soon as it is back in stock.
What's in this bundle
Scubapro S-TEK Donut Wing 40 + S-TEK Pro Harness SS + Back Shoulder Waist Pad - Army Green is backordered and will ship as soon as it is back in stock.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Product Information
Scubapro's S-TEK Donut Wing 40 + S-TEK Pro Harness SS + Back Shoulder Waist Pad is a modular technical BCD system that pairs a 40 lb/18 kg donut wing with a stainless steel back plate harness and a swap-in shoulder and waist pad kit. The system uses a six D-ring layout and is built for technical diving configurations where divers assemble their own backplate, wing, and harness components.
Who it is for
This package suits technical divers who want a dedicated back plate and donut wing setup rather than a one-piece recreational BCD. The stainless steel back plate, argon tank mounting capability, and trim weight mounting points are features aimed at divers building out a technical rig, while the adjustable TEK LOC shoulders and adjustable D-ring heights let the harness be sized to the individual diver's torso.
Key details
- Lift capacity: 40 lb / 18 kg
- BCD type: Technical
- Back plate material: Stainless Steel
- D-rings: 6 total, with shoulder, waist, and crotch strap attachment points
- Total system weight: 9.612 lb
- Wing materials: 1000D Cordura outer shell with a 500D Cordura inner bladder and PU-coated 1000 denier Cordura nylon construction
- Power inflator: BPI (standard)
- Harness item number 22.242.001 weighs 7.19 lb with a length of 16.54 in
- Pad kit materials: molded Monprene®, weighing 0.57 lb
Compatibility and sizing
The donut wing and harness shell are built in black; the color choice on this listing (Army Green, Blue, Orange, Pink, Turquoise, White, or Yellow) applies to the Shoulder & Waist Pad Color Kit, which is also compatible with Scubapro's S-Tek Pure harness in addition to the S-Tek Pro harness included here. Shoulder buckle and D-ring heights are adjustable to fit different torso lengths.
What's in the box
- S-Tek Pro Harness with Stainless Steel Back Plate
- S-Tek Donut Wing, 40 lb / 18 kg
- S-Tek Shoulder & Waist Pad Color Kit: two shoulder pads and two waist pads in your selected color
DiveCatalog.com is an authorized Scubapro dealer and has been a dive shop based in Irvine, California since 2003. Call or chat with us at 888-701-4017 if you have questions about harness sizing, pad colors, or wing compatibility.
- 3D formed back plate has a curved central profile with radiused edges for the harness shell.
- Adjustable TEK LOC shoulders let the diver dial in a snug, customized fit.
- Molded Monprene® pads cushion the shoulders, waist, and back without adding bulk.
- Adjustable shoulder buckle and D-ring heights fit different torso lengths.
- EVO Angle webbing slots allow natural webbing routing on the harness.
- Recessed wing nut socket is designed for use with gloved hands.
- Trim weight mounting points and argon tank mounting capability are built into the harness.
- Built-in carry handle on the harness aids transport.
- Donut wing construction uses a 1000D Cordura outer shell with a 500D Cordura inner bladder and PU-coated 1000 denier Cordura nylon.
- BPI power inflator is the standard inflator on this donut wing.
- Six D-ring layout provides shoulder, waist, and crotch strap attachment points.
- Swappable pad colors let divers personalize the harness with the Shoulder & Waist Pad Color Kit in Army Green, Blue, Orange, Pink, Turquoise, White, or Yellow.
| BCD Type | Technical |
| Lift Capacity | 40 lb / 18 kg |
| Back Plate Material | Stainless Steel |
| Number of D-Rings | 6 |
| Total System Weight | 9.612 lb |
| Wing Materials | 1000D Cordura outer shell, 500D Cordura inner bladder, PU-Coated 1000 Denier Cordura Nylon |
| Power Inflator | BPI (Standard) |
| Harness Item Number | 22.242.001 |
| Harness Weight | 7.19 lb |
| Harness Length | 16.54 in |
| Pad Kit Materials | Molded Monprene® |
| Pad Kit Weight | 0.57 lb |
| Pad Kit Dimensions | 10.63 in L x 0.59 in W x 6.69 in H |
| Gender | Unisex |
| Activity | Technical |
- S-Tek Pro Harness with Stainless Steel Back Plate
- S-Tek Donut Wing, 40 lb / 18 kg
- S-Tek Shoulder & Waist Pad Color Kit: two shoulder pads and two waist pads in your selected color
Frequently Asked Questions
How should a scuba BCD fit?
A BCD should fit snugly enough that it does not ride up toward your ears when inflated, while still letting you breathe fully. Fasten the waist and cummerbund first, then adjust the shoulder straps so the tank sits close to your back and the shoulders cannot slide off. With the BCD fully inflated at the surface you should still be able to take a deep, comfortable breath; if it squeezes your chest, loosen it or move up a size.
How do I rinse and care for a BCD after diving?
Rinse the outside in fresh water and also flush the inside of the bladder, because salt water gets in through the inflator and dump valves. Fill the bladder roughly a third full of fresh water through the oral inflator, slosh it around, then drain it out through the inflator and each dump valve. Hang it to dry out of direct sunlight and store it partially inflated so the bladder walls do not stick together.
Should I use integrated weights or a weight belt?
Integrated weight pockets carry the lead in the BCD itself, which many divers find more comfortable and easier on the hips, while a weight belt keeps the weight independent of your BCD. Either way, you must be able to release your ditchable weight quickly with one hand, and your buddy should know how your system releases. Non-ditchable trim pockets are useful for balance but should never hold weight you might need to drop.
How do I pack a BCD for travel?
Make sure the BCD is completely dry inside and out before packing so it does not mildew in transit. Remove all weights, deflate it fully, and fold or roll it around softer items such as a wetsuit to cushion the inflator and valves. Avoid hard creases in the air cell, and unpack and air it out as soon as you arrive.
When does a BCD need to be serviced?
Follow the service interval in the manufacturer's manual, which is commonly an annual inspection alongside the rest of your life-support gear. Have the inflator, dump valves, and bladder checked any time the inflator sticks, free-flows, feels rough, or the BCD holds air poorly. Between services, confirm that it inflates and deflates properly as part of every pre-dive check.
What is the difference between a jacket-style and a back-inflate BCD?
A jacket-style BCD holds air in panels that wrap around your sides as well as your back, while a back-inflate BCD keeps the entire air cell behind you. Jacket styles tend to feel very stable and upright at the surface, and back-inflate styles keep the chest clear and are often preferred for horizontal trim underwater. Neither is objectively better, so treat it as a fit and preference decision and try both if you can.
Will my BCD fit any scuba tank?
Most recreational BCDs use an adjustable cam band sized for common single-cylinder diameters, so standard aluminum and steel tanks generally work. Re-check the band tension after the first wetting, because webbing can relax slightly and let the tank shift. If you dive doubles or unusual cylinder diameters, confirm compatibility with the manufacturer before assuming it will hold.
What colors are available for this S-Tek Pro System package?
The donut wing and harness shell are built in black. The color choices listed on this page, including Army Green, Blue, Orange, Pink, Turquoise, White, and Yellow, apply to the Shoulder & Waist Pad Color Kit, which swaps onto the harness to let you personalize the shoulder and waist pads.
Will the Shoulder & Waist Pad Color Kit work with other Scubapro harnesses?
Yes. Scubapro publishes the Shoulder & Waist Pad Color Kit as compatible with both the S-Tek Pure harness and the S-Tek Pro harness included in this package, so the pads can be moved between those two harness models.
How much lift does the S-Tek Donut Wing 40 provide?
This donut wing provides 40 lb (18 kg) of lift. It is built from a 1000D Cordura outer shell with a 500D Cordura inner bladder and PU-coated 1000 denier Cordura nylon, and uses a BPI standard power inflator.
What's included when I buy this system?
The package includes the S-Tek Pro Harness with a stainless steel back plate, the S-Tek Donut Wing rated at 40 lb/18 kg, and the S-Tek Shoulder & Waist Pad Color Kit, which contributes two shoulder pads and two waist pads in the color you select.































































