Scubapro MK25 EVO / G260 Dive Regulator System
In stock — ships from Irvine, CA
This item is currently on backorder. Order now to reserve yours, and we will ship it as soon as it is back in stock.
Scubapro MK25 EVO / G260 Dive Regulator System - Standard / Yoke (INT) is backordered and will ship as soon as it is back in stock.
Pickup available at In Store
Usually ready in 2 hours
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Save with a package
Ready-made packages that include this item
Product Information
The Scubapro MK25 EVO/G260 Dive Regulator System is a first and second stage regulator set built for recreational and technical diving in cold, temperate, and warm water, pairing a balanced piston first stage with a balanced G260 second stage. It is sold in INT (Yoke) and DIN connector versions and supports nitrox mixes up to 40%.
Who it is for
This system suits divers who want one regulator set that can move between recreational dives and technical diving across a range of water temperatures. The first stage's XTIS and anti-freeze protection are built for cold-water use, while the balanced design and adjustable second stage give divers control over breathing effort across different conditions.
Key details
- 1st stage: air balanced flow-through piston in a chrome-plated brass body with XTIS and anti-freeze protection
- 2nd stage: G Series, balanced, with a reinforced technopolymer casing, anodized aluminum front cover, metal valve housing, and metal internal components
- Adjustable inhalation effort knob with VIVA (Venturi-Initiated Vacuum Assist) on the second stage
- 2 HP ports positioned opposing each other, plus 5 LP ports (4 high-flow and 1 axial super high-flow) on a swivel turret
- Nitrox compatible up to 40% oxygen
- Reversible hose attachment for technical diving hose configurations
Compatibility and sizing
The MK25 EVO/G260 is offered in two connector options: INT (Yoke), item 12.252.010, and DIN, item 12.252.030. Dimensions are listed at 9.06 in L x 7.09 in W x 3.15 in H, with a weight of 2.8 lb for the INT/Yoke version and 2.707 lb listed for the DIN version.
What's in the box
- MK25 EVO/G260 (or MK25 EVO DIN 300/G260) regulator system
- 4mm Allen key (43.021.000)
- Manual (45.101.180)
DiveCatalog.com is an authorized Scubapro dealer and a dive shop in Irvine, California, since 2003. Call 888-701-4017 or chat with us if you have questions about connector type, fit, or compatibility before you order.
- Air balanced piston: Air balanced flow-through piston in a chrome-plated brass body provides constant airflow.
- XTIS cold-water protection: Patented Extended Thermal Insulating System improves cold-water resistance.
- Anti-freeze protection: Increases breathing reliability in extreme water temperatures.
- Balanced 2nd stage: G Series second stage uses a balanced design for consistent performance.
- VIVA adjustment: Adjustable inhalation effort knob with VIVA (Venturi-Initiated Vacuum Assist) function.
- Durable 2nd stage build: Reinforced technopolymer casing, anodized aluminum front cover, metal valve housing, and metal internal components.
- Port arrangement: Two opposing HP ports allow the first stage to be positioned up or down.
- Turret ports: Four high-flow and one axial super high-flow LP ports on a swivel turret for hose routing.
- Reversible hose attachment: Supports technical diving hose configurations.
- Nitrox ready: Rated for nitrox mixes up to 40% oxygen.
- Connector options: Available in INT (Yoke) or DIN connector versions.
| 1st Stage Type | Piston |
| 1st Stage Material | Chrome-plated brass |
| 2nd Stage Series | G Series |
| 2nd Stage Design | Balanced |
| 2nd Stage Material | Anodized aluminum front cover, metal valve housing, reinforced technopolymer casing |
| HP Ports | 2 |
| LP Ports | 5 |
| Nitrox Mix | Up to 40% |
| Water Temperature | Cold, Temperate, Warm |
| Connector Type (option 1) | INT (Yoke), SKU 12.252.010 |
| Connector Type (option 2) | DIN, SKU 12.252.030 |
| Dimensions | 9.06 in L x 7.09 in W x 3.15 in H |
| Weight (INT/Yoke) | 2.8 lb |
| Weight (DIN) | 2.707 lb |
| Warranty | Limited lifetime warranty |
- MK25 EVO/G260 (or MK25 EVO DIN 300/G260) regulator system
- 4mm Allen key (43.021.000)
- Manual (45.101.180)
⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
How often does a scuba regulator need servicing?
Follow the interval in your regulator's manual, since manufacturers commonly specify an annual inspection or a set number of dives and many warranties depend on it. A regulator is life-support equipment, so service belongs with a factory-trained technician rather than being attempted at home. Have it looked at sooner than scheduled if you notice increased breathing effort, free-flow, bubbles, or water in the second stage.
How do I rinse and care for a regulator after diving?
Make sure the dust cap is dry and firmly seated over the first-stage inlet before the regulator goes anywhere near water, because water inside the first stage is the leading cause of internal corrosion. Rinse in fresh water without pressing the purge button, since purging while depressurized can draw water back into the second stage. Shake out the water and hang it to dry with the hoses in wide, gentle loops rather than tight bends.
Can I fly with a scuba regulator?
Regulators travel well and are usually best carried in hand luggage where they will not be crushed or lost. A regulator holds no gas of its own, so there is nothing inherently problematic about it on an aircraft, though the airline and security screeners always have the final say. Pack it dry with the dust cap in place, in a padded regulator bag or wrapped in soft gear.
Can I use my regulator with nitrox?
Many modern regulators are supplied as suitable for nitrox mixes up to 40 percent oxygen, which is the widely used recreational industry standard, while anything above that requires dedicated oxygen-clean equipment and procedures. Confirm what your specific regulator's manual states, and follow your nitrox training and your fill station's requirements. Never assume a regulator is oxygen-service clean simply because it looks clean or is new.
What is the difference between DIN and yoke regulators?
A yoke (A-clamp) fitting clamps over the tank valve and is the most common connection across much of the recreational world, while a DIN fitting screws into the valve and is standard in much of Europe and in technical diving. DIN captures the o-ring inside the threads, which many divers consider more secure, but yoke is often what rental cylinders provide. Adapters exist in both directions, so check what is used where you dive before deciding.
What is the octopus regulator for?
The octopus is your backup second stage, carried so you can share air with a buddy who is out of gas, or breathe from it yourself if your primary fails or free-flows. It is normally on a longer, brightly colored hose so it is easy to find and hand over under stress. Secure it in the triangle between your chin and the bottom of your rib cage so it is instantly accessible and not dragging through sand or coral.
How should I store a regulator between dive trips?
Store it fully dry, out of sunlight, with the dust cap in place and the hoses in wide loops rather than tightly coiled. Avoid hanging it by the second stages for long periods, which stresses the hose fittings; laying it flat in a padded bag or hanging it by the first stage is kinder. If it has sat unused for a long stretch, have it checked before your next trip rather than assuming it is ready to dive.
What does the VIVA knob on the G260 second stage do?
VIVA stands for Venturi-Initiated Vacuum Assist, and it is an adjustable inhalation effort knob on the G260 second stage. Turning it lets the diver adjust breathing resistance at the second stage. It is a built-in control on the regulator, not an add-on accessory.
What is included with the Scubapro MK25 EVO/G260?
The box includes the regulator system, a 4mm Allen key (43.021.000), and the manual (45.101.180). An octopus, gauge or additional hoses are not part of this set unless listed separately.
What is the difference between the INT and DIN versions of the MK25 EVO/G260?
The INT (Yoke) version, SKU 12.252.010, uses a yoke clamp connector, while the DIN version, SKU 12.252.030, uses a DIN screw-in connector. Both share the same MK25 EVO piston first stage and G260 second stage, with the same nitrox rating of up to 40% and the same core materials.
Is the MK25 EVO/G260 covered by a warranty?
Yes, it carries a limited lifetime warranty as published by Scubapro for its regulators.




















