Scubapro S - TEK Donut Wing 30 + S - TEK Pro Harness SS + Single Tank Adapter

A BCD should fit snugly enough that it does not ride up toward your ears when inflated, while still letting you breathe fully. Fasten the waist and cummerbund first, then adjust the shoulder straps so the tank sits close to your back and the shoulders cannot slide off. With the BCD fully inflated at the surface you should still be able to take a deep, comfortable breath; if it squeezes your chest, loosen it or move up a size.

Rinse the outside in fresh water and also flush the inside of the bladder, because salt water gets in through the inflator and dump valves. Fill the bladder roughly a third full of fresh water through the oral inflator, slosh it around, then drain it out through the inflator and each dump valve. Hang it to dry out of direct sunlight and store it partially inflated so the bladder walls do not stick together.

Integrated weight pockets carry the lead in the BCD itself, which many divers find more comfortable and easier on the hips, while a weight belt keeps the weight independent of your BCD. Either way, you must be able to release your ditchable weight quickly with one hand, and your buddy should know how your system releases. Non-ditchable trim pockets are useful for balance but should never hold weight you might need to drop.

Make sure the BCD is completely dry inside and out before packing so it does not mildew in transit. Remove all weights, deflate it fully, and fold or roll it around softer items such as a wetsuit to cushion the inflator and valves. Avoid hard creases in the air cell, and unpack and air it out as soon as you arrive.

Follow the service interval in the manufacturer's manual, which is commonly an annual inspection alongside the rest of your life-support gear. Have the inflator, dump valves, and bladder checked any time the inflator sticks, free-flows, feels rough, or the BCD holds air poorly. Between services, confirm that it inflates and deflates properly as part of every pre-dive check.

A jacket-style BCD holds air in panels that wrap around your sides as well as your back, while a back-inflate BCD keeps the entire air cell behind you. Jacket styles tend to feel very stable and upright at the surface, and back-inflate styles keep the chest clear and are often preferred for horizontal trim underwater. Neither is objectively better, so treat it as a fit and preference decision and try both if you can.

Most recreational BCDs use an adjustable cam band sized for common single-cylinder diameters, so standard aluminum and steel tanks generally work. Re-check the band tension after the first wetting, because webbing can relax slightly and let the tank shift. If you dive doubles or unusual cylinder diameters, confirm compatibility with the manufacturer before assuming it will hold.

The package includes three parts: the S-Tek Pro Harness mounted on the 3D formed stainless steel back plate, the 30 lb (13 kg) S-Tek Donut Wing, and an aluminum Single Tank Adapter. That combination makes it a complete single-cylinder backplate-and-wing system. SCUBAPRO lists it under item number 22.249.030 with UPC 4048336423380, and the assembled system weight is 10.302 lb.

SCUBAPRO publishes this S-Tek Pro System in 30 lb, 40 lb and 60 lb configurations. This 30 lb package includes the aluminum Single Tank Adapter; SCUBAPRO also publishes 40 lb and 60 lb configurations. SCUBAPRO also publishes 40 lb and 60 lb configurations if you need more lift. If you are unsure which lift capacity matches your rig, call DiveCatalog at 888-701-4017.

The harness uses adjustable TEK LOC shoulders so you can set a snug fit, and the shoulder buckle and D-ring heights adjust for different torso lengths. Molded Monprene pads cushion the shoulders, waist and back, and EVO Angle webbing slots route the webbing naturally while reducing abrasion. The back plate is a 3D formed stainless steel design with a softened organic shape.

Yes. The S-Tek Pro back plate and harness include mounting points for trim weights and for an argon tank, which is useful for drysuit divers who run a separate inflation gas. The system also provides six D-rings, two pre-bent on the shoulders, one on the waist and two on the crotch strap, for clipping stages, lights and other accessories.