Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Product Information
The Seac Comfort 3.0 is a 3 mm neoprene dive glove lined with Nylon fabric, built to combine thermal protection with underwater dexterity. It comes in Black and is offered in 7 sizes from 2XS to 2XL, with sizing based on palm circumference, and is designed to suit both women and men.
Who it is for
The Comfort 3.0 suits divers who want warm hands without losing the dexterity needed to handle dive gear. Because it is offered across 7 sizes and labeled suitable for both women and men, it fits a wide range of hand sizes looking for a snug, dexterity-focused 3 mm glove.
Key details
- 3 mm neoprene lined with Nylon fabric for thermal protection and touch sensitivity
- Palm covered with micro slip-resistant PU squares for grip in and out of the water
- Elastic zig-zag stitching at the wrist for easier donning, even when wet
- Every panel is glued and sewn for added durability over time
Compatibility and sizing
Size is determined by palm circumference: 2XS measures 17.5 to 19 cm, XS 19 to 20.5 cm, S 20.5 to 22 cm, M 22 to 23.5 cm, L 23.5 to 25 cm, XL 25 to 26.5 cm, and 2XL 26.5 to 28 cm. Measure the circumference of your palm and match it to the size ranges above.
DiveCatalog.com is an authorized Seac dealer and a dive shop in Irvine, California since 2003. Call or chat with us if you need help confirming your glove size or checking fit with other exposure protection.
- 3 mm neoprene construction: Lined with Nylon fabric for thermal protection combined with touch sensitivity.
- Slip-resistant palm: Covered with micro PU squares for a firm grip both in and out of the water.
- Elastic zig-zag wrist stitching: Makes the gloves easier to put on, even when wet.
- Glued and sewn seams: Every part of the glove is glued and sewn for greater resistance over time.
- Unisex fit: Suitable for both women and men.
- 7 available sizes: Sized from 2XS to 2XL based on palm circumference, from 17.5 cm to 28 cm.
- Single color option: Available in Black.
| Thickness | 3 mm |
| Material | Neoprene with Nylon fabric lining |
| Palm material | PU (polyurethane) micro slip-resistant squares |
| Color | Black |
| Palm circumference 2XS | 17.5 to 19 cm |
| Palm circumference XS | 19 to 20.5 cm |
| Palm circumference S | 20.5 to 22 cm |
| Palm circumference M | 22 to 23.5 cm |
| Palm circumference L | 23.5 to 25 cm |
| Palm circumference XL | 25 to 26.5 cm |
| Palm circumference 2XL | 26.5 to 28 cm |
⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
What thickness of dive boots, gloves, or hood should I choose?
As a general rule, thicker neoprene insulates more, so colder water pushes you toward thicker accessories, but fit, dive length, and personal cold tolerance matter as much as the millimeter number. Divers commonly lose a great deal of heat through the head, so a hood is often the highest-value warmth upgrade for the money. Remember that every added piece of neoprene also adds buoyancy you will need to account for.
How should dive boots fit?
Boots should fit like a snug athletic shoe, with no heel lift and no crushed toes; a little water inside is normal, a sloshing pocket is not. Try them on with the socks you would actually dive, and remember your fin foot pocket has to accommodate the boot. Hard-sole boots protect on rocky shore entries, while soft-sole boots are lighter and pack smaller for boat and travel diving.
How should dive gloves fit?
Gloves should be snug across the palm with fingertips reaching the ends without bunching, since trapped air and loose fingertips destroy dexterity. Thicker gloves are warmer but make buckles, clips, and inflator buttons harder to operate, so choose the thinnest glove that keeps you comfortable in your conditions. Try working a clip or buckle while wearing them before you commit.
How should a dive hood fit?
A hood should seal around the face and neck without restricting your throat or jaw, and lie flat on your head without pulling the mask strap out of position. A loose hood flushes cold water continuously, while an overly tight one is distracting and uncomfortable. Many hoods have a vent to release air trapped during descent, so check yours and burp out any trapped air before you go down.
Why does new neoprene feel so tight?
New neoprene compresses and relaxes with use, so a boot, glove, or hood that feels firm out of the packaging usually settles slightly after a few dives. It should still be snug afterward rather than loose, because neoprene that stretches into a loose fit was probably oversized to begin with. Buy for a snug fit when new, but never for a fit that restricts circulation or breathing.
Do I need to change my weighting when I add a hood, gloves, and boots?
Yes, because every piece of neoprene you add is buoyancy, and a hood, boots, and thick gloves together can shift your weighting noticeably. Do a proper buoyancy check any time you change your exposure protection rather than assuming your usual weight still works. The weight-check procedure is covered in your training, and a dive professional can help you re-do it.
How do I care for dive boots, gloves, and hoods?
Rinse them inside and out in fresh water after every dive day, since they hold sweat and salt more than any other gear, and dry them fully inside-out before packing. Dry them out of direct sunlight and never on a heater, because heat hardens neoprene and weakens glued seams. Store them dry and unfolded, as damp neoprene sealed in a bag is how gear picks up a permanent smell.
What color does the Seac Comfort 3.0 glove come in?
The Seac Comfort 3.0 is offered in Black. It is available across 7 sizes, from 2XS through 2XL, all in this same color.
How do I measure my hand for the Seac Comfort 3.0 glove?
Measure the circumference of your palm and match it to the size chart. 2XS fits 17.5 to 19 cm, XS fits 19 to 20.5 cm, S fits 20.5 to 22 cm, M fits 22 to 23.5 cm, L fits 23.5 to 25 cm, XL fits 25 to 26.5 cm, and 2XL fits 26.5 to 28 cm.
What material is the grip on the Seac Comfort 3.0 palm?
The palm is covered with micro PU, polyurethane, squares designed to be slip-resistant. This grip surface works both underwater and out of the water during gear handling and setup.
Are the Seac Comfort 3.0 gloves unisex?
Yes, the Seac Comfort 3.0 is designed to be suitable for both women and men. Sizing is based on palm circumference rather than a gendered fit, so divers choose by measurement across the 7 available sizes.
















