Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Product Information
The SEAC W-22 are long fins built for freediving and spearfishing, featuring a blade made from SEAC's FRC™ technopolymer and set at a 22° angle, paired with the brand's Motus series foot pocket.
Who it is for
These fins suit freedivers and spearfishers who spend extended time in the water, since the Motus foot pocket is built for comfort during long freediving sessions and the 22° blade angle supports the natural inclination of the ankle for powerful finning without extra strain on the calves and ankles.
Key details
- Blade material: FRC™ technopolymer, a light, reactive compound developed to perform like a carbon-fiber composite blade without the fragility of composite materials.
- Blade angle: 22°, with small stabilizing fins at the blade tip, positioned at the point of greatest water flow, to prevent sideways drift without reducing flex or power.
- Foot pocket: Motus series, a two-material construction with a stiffer compound on the sole and a softer compound on the upper, geometry-matched to the 22° blade angle.
- The foot pocket disassembles from the blade in a few steps.
- FRC compound resists breakage and permanent deformation, including at very low temperatures.
Compatibility and sizing
The blade and Motus foot pocket are designed to work together and the pocket can be removed from the blade in a few steps. The W-22 is offered in sizes 3-3.5, 4-5.5, 6.5-7, 8-8.5, 9.5-10, 11-12, and 12.5-13.5, and in Black and Black/Red colorways.
DiveCatalog.com is an authorized SEAC dealer and a dive shop in Irvine, California, open since 2003. Call 888-701-4017 or chat with us if you have questions about fit or compatibility before you order.
- FRC™ blade material. A light, reactive technopolymer engineered to offer performance similar to a carbon-fiber composite blade without composite fragility.
- 22° blade angle. Supports the natural inclination of the ankle, aiding natural, powerful finning without added fatigue to the calves and ankles.
- Blade-tip stabilizing fins. Small fins at the end of the blade, positioned at the point of greatest water flow, prevent the blade from drifting sideways without compromising flex or power.
- Cold and impact resistance. The FRC compound resists breakage and permanent deformation, even at very low temperatures.
- Motus series foot pocket. A two-material foot pocket, stiffer on the sole and softer on the upper, known for comfort during long freediving sessions.
- Blade-matched foot pocket geometry. The Motus pocket geometry is optimized for 22°-angled blades.
- Disassemblable design. The foot pocket can be separated from the blade in a few steps.
- Size and color range. Available in sizes 3-3.5 through 12.5-13.5 and in Black and Black/Red colorways.
| Fin type | Long fin for freediving and spearfishing |
| Blade angle | 22° |
| Blade material | FRC™ technopolymer |
| Foot pocket | Motus series foot pocket, two-material construction (stiffer sole, softer upper) |
| Foot pocket disassembly | Disassembles from the blade in a few steps |
| Colors | Black, Black/Red |
| Sizes | 3-3.5, 4-5.5, 6.5-7, 8-8.5, 9.5-10, 11-12, 12.5-13.5 |
⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
What is the difference between open-heel and full-foot fins?
Open-heel fins have an adjustable heel strap and are worn with dive boots, which protect your feet on shore entries and add warmth. Full-foot fins slip on like a shoe against bare skin or a thin sock, and are typically lighter and easier to pack. Most scuba divers choose open-heel fins with boots, while full-foot fins suit warm water, snorkeling, and pool use.
How should scuba fins fit?
Open-heel fins should be sized around the boots you will actually wear, snug with the strap set so your heel stays seated and your foot does not slide forward in the pocket. Full-foot fins should fit like a firm shoe, with no heel lift, no pinched toes, and no gap that lets water pump in and out. Too loose causes heel blisters and lost fins in current, and too tight causes foot cramps.
Should I buy dive boots before fins?
Choose your boots first and size open-heel fins around them, because sole thickness changes the foot-pocket size you need. A thin warm-water boot and a thick cold-water boot with a rugged sole can easily be a fin size apart. If you already own fins, bring them along when you buy boots so you can check the combination.
Are spring straps worth it?
Spring straps replace the adjustable rubber strap with a stainless spring that stretches on and off, so there is nothing to buckle with cold or gloved hands and no rubber strap to perish and snap mid-dive. They hold constant tension, which many divers find more comfortable and consistent. They are sized rather than adjustable, so match the length to your foot pocket and the boots you dive.
What are the best fins for travel?
For travel, length and weight matter most, so shorter blades and travel-specific open-heel or full-foot models pack more easily and save baggage allowance. Some fins have removable blades or compact foot pockets designed for luggage. Pack fins along the outside walls of your bag, where they also act as protection for softer gear.
What is the difference between paddle and split fins?
Paddle fins use a solid blade that transfers power directly, which many divers prefer for precision, control in current, and non-flutter kicks such as the frog kick. Split fins have a slit down the blade that lets water pass through, which generally makes flutter kicking easier on the legs but gives up some control and works less well with other kick styles. Neither is inherently better, so let your kick style, leg strength, and conditions decide, and try both if you get the chance.
How do I care for dive fins?
Rinse them in fresh water after each dive day, paying attention to buckles, springs, and strap channels where salt collects, and dry them out of direct sunlight. Store them flat or hanging from the foot pocket rather than standing on the blade tips, which can take a permanent bend. Check straps, buckles, and any screws before every trip, since a failed buckle is the most common fin problem.
What is the SEAC W-22 fin designed for?
The W-22 is a long fin designed for freediving and spearfishing. It uses a blade made from SEAC's FRC™ technopolymer set at a 22° angle, paired with the Motus series foot pocket, which is built for comfort during long freediving sessions.
Can the SEAC W-22 blade be separated from the foot pocket?
Yes. The Motus foot pocket disassembles from the blade in a few steps, and its geometry is optimized for 22°-angled blades.
What sizes and colors does the SEAC W-22 come in?
The W-22 is available in sizes 3-3.5, 4-5.5, 6.5-7, 8-8.5, 9.5-10, 11-12, and 12.5-13.5, and in Black or Black/Red colorways. Choose the size that matches your foot measurement for the Motus foot pocket.
Why does the W-22 blade have a 22° angle?
The 22° angle is built to support the natural inclination of the ankle, which SEAC states allows for natural, powerful finning without causing fatigue to the calves and ankles. Small stabilizing fins at the blade tip also keep the blade from drifting sideways during the kick.























