Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Product Information
The Scubapro Litehawk BCD is available in 2 configurations. Select a configuration above to shop it, or expand each section below for that configuration's full features and specs.
BPI — features & specs
The Scubapro Litehawk BCD is an ultralight, back-inflated travel buoyancy compensator built from 420 denier nylon with a flexible soft backpack, a 29.2 lb lift capacity, and a Balanced Power Inflator (BPI), made for divers who want a packable rig without giving up stable, horizontal trim.
Who it is for
The Litehawk suits traveling divers who fly with carry-on or checked bags and want a BCD that folds down small for tropical and temperate water trips. Because the back-inflated air cell carries no inherent buoyancy, it suits divers who want to dive with minimal ballast weight, and the low-profile rear cell keeps the chest clear for a comfortable, horizontal swimming position.
Key details
- BCD type: back-inflated, with a flexible soft pack backpack
- Materials: 420 denier nylon
- Lift capacity: 29.2 lb
- Weight: 5.36 lb (XS/S) or 5.49 lb (M/L)
- Length: 19.75 in (XS/S) or 20.5 in (M/L)
- Power inflator: Balanced Power Inflator (BPI), also offered with an AIR2 V GEN alternate air source inflator
- D-rings: four aluminum D-rings for gear attachment
- Pockets: two basic accessory pockets plus two rear trim pockets for balanced trim
- Deflation: three-position dump deflation system for air release from multiple underwater orientations
- Weight integration: optional
- Tank attachment: tank band and strap system for secure cylinder placement
Compatibility and sizing
The Litehawk is offered here in XS/S, M/L, and XL/2XL with the Balanced Power Inflator (BPI).
DiveCatalog.com is an authorized Scubapro dealer and a dive shop in Irvine, California since 2003. Call 888-701-4017 or chat with us if you have questions about sizing, inflator choice, or fit for your travel diving setup.
Air2 — features & specs
The Scubapro Litehawk BCD with AIR2 V GEN is a back-inflated travel BCD built on a flexible soft backpack that lays flat for packing, fitted on this SKU with the AIR2 V GEN alternate air source and power inflator combo. It is designed to carry minimal inherent buoyancy, so the diver needs only basic ballast weight, and it delivers 29.2 lbs of lift from a low-profile rear air cell.
Who it is for
This BCD suits divers who travel by air and want to shave weight and bulk from their gear bag without giving up a stable, back-inflated air cell. The progressively shaped rear bladder keeps the chest clear and increases range of motion, which divers who prefer a horizontal trim in warm or temperate water tend to like. Because it carries minimal inherent buoyancy, only basic ballast weight is required, with optional quick-release weight pockets available separately.
Key details
- Back-inflated BCD with a flexible soft backpack, 29.2 lbs lift capacity
- 420 denier nylon construction, 6.1 lbs total weight, 20.5 inches in length
- Four aluminum D-rings, two basic accessory pockets, two rear trim pouches
- Three-position dump deflation system and an adjustable belt-style waist strap with nylon buckle
- Rotating quick-release shoulder buckles for custom strap routing
- Fitted with the AIR2 V GEN alternate air source and power inflator
- Weight integration is optional on this BCD
Compatibility and sizing
This listing is the XL/2XL size in Blue (item 22.220.555, UPC 4048336314664), fitted with the AIR2 V GEN inflator. Optional quick-release weight pockets are available separately for divers who want integrated ballast instead of a weight belt.
What's in the box
- Litehawk BCD (Blue, XL/2XL) with AIR2 V GEN inflator
- Product Manual
- Read First Manual
DiveCatalog.com is an authorized Scubapro dealer and a dive shop in Irvine, California, serving divers since 2003. Call or chat with us at 888-701-4017 if you have questions about fit, sizing, or compatibility with your current gear.
⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
How should a scuba BCD fit?
A BCD should fit snugly enough that it does not ride up toward your ears when inflated, while still letting you breathe fully. Fasten the waist and cummerbund first, then adjust the shoulder straps so the tank sits close to your back and the shoulders cannot slide off. With the BCD fully inflated at the surface you should still be able to take a deep, comfortable breath; if it squeezes your chest, loosen it or move up a size.
How do I rinse and care for a BCD after diving?
Rinse the outside in fresh water and also flush the inside of the bladder, because salt water gets in through the inflator and dump valves. Fill the bladder roughly a third full of fresh water through the oral inflator, slosh it around, then drain it out through the inflator and each dump valve. Hang it to dry out of direct sunlight and store it partially inflated so the bladder walls do not stick together.
Should I use integrated weights or a weight belt?
Integrated weight pockets carry the lead in the BCD itself, which many divers find more comfortable and easier on the hips, while a weight belt keeps the weight independent of your BCD. Either way, you must be able to release your ditchable weight quickly with one hand, and your buddy should know how your system releases. Non-ditchable trim pockets are useful for balance but should never hold weight you might need to drop.
How do I pack a BCD for travel?
Make sure the BCD is completely dry inside and out before packing so it does not mildew in transit. Remove all weights, deflate it fully, and fold or roll it around softer items such as a wetsuit to cushion the inflator and valves. Avoid hard creases in the air cell, and unpack and air it out as soon as you arrive.
When does a BCD need to be serviced?
Follow the service interval in the manufacturer's manual, which is commonly an annual inspection alongside the rest of your life-support gear. Have the inflator, dump valves, and bladder checked any time the inflator sticks, free-flows, feels rough, or the BCD holds air poorly. Between services, confirm that it inflates and deflates properly as part of every pre-dive check.
What is the difference between a jacket-style and a back-inflate BCD?
A jacket-style BCD holds air in panels that wrap around your sides as well as your back, while a back-inflate BCD keeps the entire air cell behind you. Jacket styles tend to feel very stable and upright at the surface, and back-inflate styles keep the chest clear and are often preferred for horizontal trim underwater. Neither is objectively better, so treat it as a fit and preference decision and try both if you can.
Will my BCD fit any scuba tank?
Most recreational BCDs use an adjustable cam band sized for common single-cylinder diameters, so standard aluminum and steel tanks generally work. Re-check the band tension after the first wetting, because webbing can relax slightly and let the tank shift. If you dive doubles or unusual cylinder diameters, confirm compatibility with the manufacturer before assuming it will hold.














