OMS Dive Gear *DIN AirStream 1st Stage conversion to YOKE
In stock — ships from Irvine, CA
This item is currently on backorder. Order now to reserve yours, and we will ship it as soon as it is back in stock.
OMS Dive Gear *DIN AirStream 1st Stage conversion to YOKE is backordered and will ship as soon as it is back in stock.
Pickup available at In Store
Usually ready in 2 hours
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Product Information
- Converts an OMS AirStream DIN first stage to a yoke (INT) connection
- Allows one first stage to be used with yoke cylinder valves when travelling
- Genuine OMS conversion hardware
- Retains the 300 bar first stage while adapting the cylinder interface
- For installation by a qualified regulator technician
| Brand | OMS |
| Product Type | First stage connection conversion |
| Application | AirStream first stage |
| Converts | DIN to yoke (INT) |
| Installation | Qualified regulator technician |
⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
What does the OMS OM50203 conversion do?
It converts an OMS AirStream first stage from a yoke (INT) tank connection to a DIN connection. Yoke first stages clamp over the cylinder valve, while DIN first stages thread into it, so the conversion lets the same AirStream first stage be used on cylinders fitted with DIN valves. Stocked under DiveCatalog item number OM50203; contact us to confirm the OMS factory part number.
Will this fit any first stage, or only the OMS AirStream?
It is intended for the OMS AirStream first stage; contact us to confirm it fits your regulator before ordering. Before ordering, check that your first stage is an AirStream and that it currently uses a yoke (INT) connection. If you are not sure which OMS first stage you own, call DiveCatalog at 888-701-4017 or start a chat and we will help identify it.
Can I install the DIN conversion myself?
We recommend having the conversion done by a qualified regulator service technician. Changing the tank connection on a first stage means opening a high pressure assembly, so the finished regulator should be reassembled to specification, pressure tested and leak checked before it is dived.
Should I choose DIN or stay with yoke?
Choose based on your cylinder valves: DIN threads into the valve, yoke clamps over it. Converting lets one AirStream first stage serve DIN valves.












