Oceanic Veo 4.0 Navcon Dive Computer

A dive computer tracks the actual depth and time profile you have dived and the tissue loading that follows from it, which is personal to you. A rented computer has no record of your recent diving, and swapping models each trip means relearning the display and menus when you should be focused on the dive. Owning one you know well is a genuine safety and comfort improvement.

No. A computer only tracks the profile of the diver actually wearing it, and even buddies who stay together do not follow identical depth and time profiles. Every diver needs their own computer, and passing one between divers or between dives is unsafe.

Conservatism settings make the computer's calculations more cautious, shortening allowed bottom times and adding margin beyond the base algorithm. Divers commonly add conservatism for factors such as cold, hard work, fatigue, or repetitive multi-day diving. How and when to adjust it is covered by your training and your computer's manual, so set it before you get in the water and follow what your computer tells you during the dive.

Broadly there are two types: user-replaceable batteries, often a coin cell that you or a shop swap along with resealing an o-ring, and sealed rechargeable batteries that charge from a cable or dock. Neither is universally better, as replaceable cells are convenient on remote trips while rechargeables avoid ever opening the case. Follow the manual exactly for any battery change, because an improperly seated o-ring or case is the usual cause of a flooded computer.

Yes, both change the picture, and both are governed by your training agency's guidance and your computer's instructions rather than any casual rule of thumb. Many computers have an altitude setting that must be configured before diving at elevation, and most display a no-fly or surface-interval countdown after a dive. Follow your computer and your training, and ask a dive professional or a dive-medicine specialist if you are unsure.

Rinse it in fresh water after every dive day, paying attention to the buttons and around any sensor openings where salt crystals form, and let it dry fully before storing. Keep it out of prolonged direct sun and extreme heat, and avoid pressing buttons while sand is on the case. Inspect the strap or bungee often, because a failed strap loses far more computers than a failed computer does.

A wrist computer is worn like a watch and read by raising your arm, while a console computer sits at the end of a hose with your other gauges. Air integration means the computer also displays cylinder pressure, either through a hose or from a wireless transmitter on the first stage, and often estimates remaining gas time. All of them run a decompression algorithm, so the real difference is where you read the information and how much of it you get.

Yes. The Veo 4.0 Navcon mounts as a wrist unit, on a Hockey Puck Module, or on 2-gauge and 3-gauge consoles, so the same computer can be set up for wrist wear or attached to your regulator console depending on how you prefer to dive.

Pelagic DSAT uses a Spencer/Powell data basis while Pelagic Z+ uses a Buhlmann ZHL-16C data basis. The Veo 4.0 lets you choose between the two through its Dual Algorithm feature, so you can select the decompression model that matches your training or dive style.

The Veo 4.0 connects to the free DiverLog+ App via Bluetooth, letting you track dive profiles, manage computer settings, and share dive data across devices after you surface.

The Veo 4.0 is rated to 330 ft (100 m) in Norm/Free mode and to 399 ft (120 m) in Gauge mode. Norm/Free mode covers recreational Air and Nitrox diving plus free diving. Gauge mode provides depth and time readings to 399 ft (120 m).