Oceanic Photon Color Kit

They are two configurations of Oceanic's modular Photon back-inflation BCD on one shared frame. The Photon Pro is the full-featured version: more lift (34–42 lbs by size), 304 stainless steel hardware, an included stainless TankTamer tank band, A.P.S. adjustable positioning, and 2 x 10 lb ditchable weight pockets. The Photon Air is the lightweight travel version: 25–34 lbs lift, techno-polymer hardware, a quick-dry travel harness, 2 x 5 lb ditchable pockets, and about 2 lbs lighter. Choose Pro for durability and cold-water capacity, Air for packing light.

The Photon Pro provides 34 lbs of lift in XS/SM and 42 lbs in MD/LG and XL/XXL. Its QLR4 quick-release weight system carries up to 2 x 10 lbs (4.5 kg) of ditchable weight in the front pockets plus 2 x 5 lbs (2.3 kg) in rear trim pockets, so for most recreational diving it fully replaces a weight belt. Dry weight is about 8.4 lbs, and it is built from UV-resistant 420-denier nylon with 304 stainless hardware.

It is a purely cosmetic accent kit — shoulder epaulettes, hose retainers, webbing retainers, zipper pulls, and a matching wing bungee — that lets you personalize the look of your Photon Pro or Photon Air in one of five colors (Aqua, Black, Blue, Pink, White). It changes appearance only, with no effect on lift, weight capacity, or function. The Photon platform is fully modular, so accessories cross over between the Pro and Air.

Yes — the Photon uses a back-inflation wing, so the air cell sits behind you. That keeps you streamlined and supports a comfortable, stable horizontal position in the water, which is why back-inflate designs are favored by traveling and experienced divers. Up front the harness stays uncluttered, with just the shoulder straps and integrated weight pockets.

A BCD should fit snugly enough that it does not ride up toward your ears when inflated, while still letting you breathe fully. Fasten the waist and cummerbund first, then adjust the shoulder straps so the tank sits close to your back and the shoulders cannot slide off. With the BCD fully inflated at the surface you should still be able to take a deep, comfortable breath; if it squeezes your chest, loosen it or move up a size.

Rinse the outside in fresh water and also flush the inside of the bladder, because salt water gets in through the inflator and dump valves. Fill the bladder roughly a third full of fresh water through the oral inflator, slosh it around, then drain it out through the inflator and each dump valve. Hang it to dry out of direct sunlight and store it partially inflated so the bladder walls do not stick together.

Integrated weight pockets carry the lead in the BCD itself, which many divers find more comfortable and easier on the hips, while a weight belt keeps the weight independent of your BCD. Either way, you must be able to release your ditchable weight quickly with one hand, and your buddy should know how your system releases. Non-ditchable trim pockets are useful for balance but should never hold weight you might need to drop.

Make sure the BCD is completely dry inside and out before packing so it does not mildew in transit. Remove all weights, deflate it fully, and fold or roll it around softer items such as a wetsuit to cushion the inflator and valves. Avoid hard creases in the air cell, and unpack and air it out as soon as you arrive.

Follow the service interval in the manufacturer's manual, which is commonly an annual inspection alongside the rest of your life-support gear. Have the inflator, dump valves, and bladder checked any time the inflator sticks, free-flows, feels rough, or the BCD holds air poorly. Between services, confirm that it inflates and deflates properly as part of every pre-dive check.

A jacket-style BCD holds air in panels that wrap around your sides as well as your back, while a back-inflate BCD keeps the entire air cell behind you. Jacket styles tend to feel very stable and upright at the surface, and back-inflate styles keep the chest clear and are often preferred for horizontal trim underwater. Neither is objectively better, so treat it as a fit and preference decision and try both if you can.

Most recreational BCDs use an adjustable cam band sized for common single-cylinder diameters, so standard aluminum and steel tanks generally work. Re-check the band tension after the first wetting, because webbing can relax slightly and let the tank shift. If you dive doubles or unusual cylinder diameters, confirm compatibility with the manufacturer before assuming it will hold.

No. Oceanic lists the Photon Color Kits as cross-compatible across the Photon product line, so the same kit fits either the Photon Pro or the Photon Air. The kits are part of Oceanic's modular accessory system, so the epaulettes, hose and webbing retainers, zipper pulls and wing bungee install on both configurations. Choose by color rather than by BCD model.

Yes. Oceanic describes the Photon Color Kits as interchangeable customization accessories, so owning more than one kit lets you change the trim color on the same BCD whenever you want, for example a bright accent for boat diving and black for a low-key look. Each kit is sold in a single color: Black, White, Blue, Pink or Aqua.

The Photon system accepts additional accessories alongside the color kit, including utility pockets, a dive housing holster, and the TankTamer QR tank band. Because the Photon uses a modular design, you can combine functional add-ons with a color kit to change both the capability and the appearance of the harness. Contact us if you want help matching accessories to your setup.