Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Product Information
The Oceanic CDX First Stage Dive Regulator is a balanced diaphragm first stage built from machined, triple chrome marine brass, offered in YOKE or DIN configuration, with a lifetime warranty and free parts for life.
Who it is for
This first stage suits divers building or upgrading a regulator setup, including those diving nitrox blends up to 40 percent.
Key details
- Valve type: cDX balanced diaphragm design.
- Primary material: machined, triple chrome marine brass.
- Ports: angled ports for ideal hose routing, with 4 low-pressure and 2 high-pressure pressure ports.
- Work of breathing: 1.23 Joules.
- Nitrox compatibility: standard to 40 percent.
- Environmental protection: yes, on the cDX design.
- Service interval: every 2 years, required.
Compatibility and sizing
Choose the YOKE (A-clamp) version, SKU 40.377, or the DIN version, SKU 40.3771, to match your tank valve connection.
DiveCatalog.com is an authorized Oceanic dealer and has operated as a dive shop in Irvine, California since 2003. Call 888-701-4017 or start a chat if you have questions about DIN versus yoke fit or matching this first stage to the rest of your regulator setup.
- Balanced diaphragm first stage. The cDX valve design is a balanced diaphragm first stage rather than a piston design.
- Marine-grade construction. Machined from triple chrome marine brass for durability.
- Angled ports. Ports are angled for ideal hose routing.
- Ample port count. Comes with 4 low-pressure ports and 2 high-pressure ports.
- Work of breathing. Rated at 1.23 Joules.
- Nitrox ready. Compatible with nitrox mixes standard to 40 percent.
- Environmental protection. The cDX design is listed with environmental protection.
- Lifetime coverage. Backed by a lifetime warranty and free parts for life.
- Required service schedule. Service interval is every 2 years, and servicing is required.
- Buyer confidence. Comes with a 30 day satisfaction guarantee.
| Valve Type | cDX Balanced diaphragm (SPX piston also referenced on spec sheet) |
| Primary Material | Machined, triple chrome marine brass |
| Angled Ports | Yes, for ideal hose routing |
| Pressure Ports | LP (4), HP (2) |
| Work of Breathing | 1.23 Joules |
| Nitrox Compatibility | Standard to 40% |
| Environmental Protection | cDX: Yes, sPX: No |
| Warranty | Lifetime & Free Parts for Life |
| Service Interval | 2 Years, Required |
| Satisfaction Guarantee | 30 days |
| Connection Type | YOKE (SKU 40.377) or DIN (SKU 40.3771) |
⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
How often does a scuba regulator need servicing?
Follow the interval in your regulator's manual, since manufacturers commonly specify an annual inspection or a set number of dives and many warranties depend on it. A regulator is life-support equipment, so service belongs with a factory-trained technician rather than being attempted at home. Have it looked at sooner than scheduled if you notice increased breathing effort, free-flow, bubbles, or water in the second stage.
How do I rinse and care for a regulator after diving?
Make sure the dust cap is dry and firmly seated over the first-stage inlet before the regulator goes anywhere near water, because water inside the first stage is the leading cause of internal corrosion. Rinse in fresh water without pressing the purge button, since purging while depressurized can draw water back into the second stage. Shake out the water and hang it to dry with the hoses in wide, gentle loops rather than tight bends.
Can I fly with a scuba regulator?
Regulators travel well and are usually best carried in hand luggage where they will not be crushed or lost. A regulator holds no gas of its own, so there is nothing inherently problematic about it on an aircraft, though the airline and security screeners always have the final say. Pack it dry with the dust cap in place, in a padded regulator bag or wrapped in soft gear.
Can I use my regulator with nitrox?
Many modern regulators are supplied as suitable for nitrox mixes up to 40 percent oxygen, which is the widely used recreational industry standard, while anything above that requires dedicated oxygen-clean equipment and procedures. Confirm what your specific regulator's manual states, and follow your nitrox training and your fill station's requirements. Never assume a regulator is oxygen-service clean simply because it looks clean or is new.
What is the difference between DIN and yoke regulators?
A yoke (A-clamp) fitting clamps over the tank valve and is the most common connection across much of the recreational world, while a DIN fitting screws into the valve and is standard in much of Europe and in technical diving. DIN captures the o-ring inside the threads, which many divers consider more secure, but yoke is often what rental cylinders provide. Adapters exist in both directions, so check what is used where you dive before deciding.
What is the octopus regulator for?
The octopus is your backup second stage, carried so you can share air with a buddy who is out of gas, or breathe from it yourself if your primary fails or free-flows. It is normally on a longer, brightly colored hose so it is easy to find and hand over under stress. Secure it in the triangle between your chin and the bottom of your rib cage so it is instantly accessible and not dragging through sand or coral.
How should I store a regulator between dive trips?
Store it fully dry, out of sunlight, with the dust cap in place and the hoses in wide loops rather than tightly coiled. Avoid hanging it by the second stages for long periods, which stresses the hose fittings; laying it flat in a padded bag or hanging it by the first stage is kinder. If it has sat unused for a long stretch, have it checked before your next trip rather than assuming it is ready to dive.
What is the difference between the cDX and SPX valve designs on this first stage?
The cDX is a balanced diaphragm first stage, while SPX refers to a piston design listed on the same spec sheet. The cDX version includes environmental protection, while the SPX does not. Both appear on the same spec sheet; the cDX is listed with environmental protection, while the SPX piston design is not.
Is the Oceanic CDX first stage environmentally sealed?
The cDX valve design is listed with environmental protection; the sPX piston design is listed without it.
What material is the Oceanic CDX first stage made from?
It is machined from triple chrome marine brass, the primary material listed for this first stage.
What warranty and service plan come with this first stage?
It carries a lifetime warranty with free parts for life and a 30 day satisfaction guarantee. Service is required every 2 years.













