Oceanic Alpha 8 Sport Yoke Regulator Set
In stock — ships from Irvine, CA
This item is currently on backorder. Order now to reserve yours, and we will ship it as soon as it is back in stock.
Oceanic Alpha 8 Sport Yoke Regulator Set - YOKE is backordered and will ship as soon as it is back in stock.
Pickup available at In Store
Usually ready in 2 hours
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Save with Open Box or Used Purchase
Save with a package
Ready-made packages that include this item
Save $44.99 (6% off)
Save $102.95 (5% off)
Save $102.95 (5% off)
Save $44.99 (4% off)
Save $96.98 (10% off)
Product Information
The Oceanic Alpha 8 Sport Yoke Regulator Set is an entry-level first and second stage scuba regulator package with a yoke (A-clamp) first stage connection, nitrox compatibility to 40 percent oxygen, and a second stage that weighs 6 ounces without the hose. It is built for reliable breathing and durable, everyday use by divers who want a straightforward, serviceable regulator.
Who it is for
This set suits the new or recreational diver assembling a first personal regulator, and the traveling diver who wants a light, compact package in a carry-on. The 2.9 inch front profile and 6 ounce second stage keep bulk and weight down, while the design is intended to be inexpensive to maintain, which matters for divers who plan to keep the same regulator for many seasons. Because it is nitrox compatible to 40 percent, it also works for divers moving into standard recreational enriched air diving.
Key details
- Yoke (A-clamp) first stage connection, as supplied in this configuration.
- Second stage weight of 6 ounces without the hose, with a 2.9 inch front profile.
- Minimum cracking effort of 1.1 CIW, with factory set inhalation effort of 1.2 to 1.4 CIW.
- Demand valve with an integrated purge button and an orthodontic mouthpiece.
- Nitrox compatible to 40 percent oxygen.
- Designed to perform to the U.S. Navy Class A standards at 198 feet.
- Covered by a Limited Lifetime Warranty, a Limited Lifetime Service Agreement, and a 30-Day Satisfaction Guarantee.
Compatibility and sizing
This listing is offered in the YOKE configuration, which clamps over a yoke tank valve. The second stage uses an orthodontic mouthpiece shaped for a comfortable fit and seal. Nitrox use is supported up to 40 percent oxygen; richer mixes require dedicated oxygen-clean equipment and procedures.
DiveCatalog.com is an authorized Oceanic dealer and a real dive shop in Irvine, California since 2003. Call or chat with us at 888-701-4017 if you want help confirming valve compatibility, hose routing, or how this set pairs with your octopus and gauges.
- Yoke first stage connection supplied in the YOKE configuration for standard A-clamp tank valves.
- Demand valve second stage for precise air delivery and quick response underwater.
- Integrated purge button for easy clearing of the second stage.
- Orthodontic mouthpiece shaped for a comfortable fit and seal.
- Nitrox compatible to 40 percent oxygen for standard recreational enriched air diving.
- Lightweight second stage at 6 ounces without the hose.
- Compact front profile measuring 2.9 inches.
- Low minimum cracking effort of 1.1 CIW for light inhalation.
- Factory set inhalation effort of 1.2 to 1.4 CIW for tuned breathing under load.
- Designed to U.S. Navy Class A standards at 198 feet for demanding depth performance.
- Inexpensive to maintain for routine servicing and long-term use.
- Limited Lifetime Warranty, Limited Lifetime Service Agreement, and 30-Day Satisfaction Guarantee.
| Brand | Oceanic |
| Model | Alpha 8 Sport |
| Product type | Regulator set, first and second stage |
| First stage connection | Yoke (A-clamp) |
| Second stage type | Demand valve with integrated purge button |
| Mouthpiece | Orthodontic |
| Nitrox compatibility | Up to 40% oxygen |
| Weight (without hose) | 6 oz |
| Front profile | 2.9 in |
| Minimum cracking effort | 1.1 CIW |
| Factory set inhalation effort | 1.2 to 1.4 CIW |
| Performance standard | Designed to perform to U.S. Navy Class A standards at 198 ft |
| Part number | 40.3520.29 |
| Warranty | Limited Lifetime Warranty and Limited Lifetime Service Agreement |
| Satisfaction guarantee | 30-Day Satisfaction Guarantee |
⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
How often does a scuba regulator need servicing?
Follow the interval in your regulator's manual, since manufacturers commonly specify an annual inspection or a set number of dives and many warranties depend on it. A regulator is life-support equipment, so service belongs with a factory-trained technician rather than being attempted at home. Have it looked at sooner than scheduled if you notice increased breathing effort, free-flow, bubbles, or water in the second stage.
How do I rinse and care for a regulator after diving?
Make sure the dust cap is dry and firmly seated over the first-stage inlet before the regulator goes anywhere near water, because water inside the first stage is the leading cause of internal corrosion. Rinse in fresh water without pressing the purge button, since purging while depressurized can draw water back into the second stage. Shake out the water and hang it to dry with the hoses in wide, gentle loops rather than tight bends.
Can I fly with a scuba regulator?
Regulators travel well and are usually best carried in hand luggage where they will not be crushed or lost. A regulator holds no gas of its own, so there is nothing inherently problematic about it on an aircraft, though the airline and security screeners always have the final say. Pack it dry with the dust cap in place, in a padded regulator bag or wrapped in soft gear.
Can I use my regulator with nitrox?
Many modern regulators are supplied as suitable for nitrox mixes up to 40 percent oxygen, which is the widely used recreational industry standard, while anything above that requires dedicated oxygen-clean equipment and procedures. Confirm what your specific regulator's manual states, and follow your nitrox training and your fill station's requirements. Never assume a regulator is oxygen-service clean simply because it looks clean or is new.
What is the difference between DIN and yoke regulators?
A yoke (A-clamp) fitting clamps over the tank valve and is the most common connection across much of the recreational world, while a DIN fitting screws into the valve and is standard in much of Europe and in technical diving. DIN captures the o-ring inside the threads, which many divers consider more secure, but yoke is often what rental cylinders provide. Adapters exist in both directions, so check what is used where you dive before deciding.
What is the octopus regulator for?
The octopus is your backup second stage, carried so you can share air with a buddy who is out of gas, or breathe from it yourself if your primary fails or free-flows. It is normally on a longer, brightly colored hose so it is easy to find and hand over under stress. Secure it in the triangle between your chin and the bottom of your rib cage so it is instantly accessible and not dragging through sand or coral.
How should I store a regulator between dive trips?
Store it fully dry, out of sunlight, with the dust cap in place and the hoses in wide loops rather than tightly coiled. Avoid hanging it by the second stages for long periods, which stresses the hose fittings; laying it flat in a padded bag or hanging it by the first stage is kinder. If it has sat unused for a long stretch, have it checked before your next trip rather than assuming it is ready to dive.
Is the Oceanic Alpha 8 Sport a good first regulator for a new diver?
Yes. It is built as an entry-level first and second stage package that focuses on reliable breathing, durable use, and low maintenance cost. The second stage weighs 6 ounces without the hose and has a 2.9 inch front profile, so it is easy to handle, and the minimum cracking effort of 1.1 CIW keeps inhalation light for divers still building comfort underwater.
Does this Alpha 8 Sport set come with a DIN first stage?
This listing is the YOKE version, so the first stage uses the A-clamp fitting that clamps over the tank valve. This listing is the YOKE version, which uses the A-clamp fitting that clamps over the tank valve. If you dive mainly in Europe or on technical setups where DIN valves are standard, contact us before ordering so we can confirm the right configuration for you.
What does designed to U.S. Navy Class A standards at 198 feet mean?
It describes the breathing performance target the Alpha 8 Sport was designed to meet, measured at a depth of 198 feet. It is a performance benchmark rather than a recommended dive depth. Stay within the limits of your training, your certification agency's tables or computer, and your gas plan, since recreational limits are typically far shallower than that test depth.
What are the warranty and service terms on the Alpha 8 Sport?
The Alpha 8 Sport is backed by a Limited Lifetime Warranty and a Limited Lifetime Service Agreement, plus a 30-Day Satisfaction Guarantee. The Alpha 8 Sport is backed by a Limited Lifetime Warranty, Limited Lifetime Service Agreement, and 30-Day Satisfaction Guarantee. Call us at 888-701-4017 if you have questions about registering the regulator.













