Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Product Information
The Oceanic Alpha 8 Second Stage Dive Regulator is an entry-level, unbalanced, non-adjustable demand valve sold on its own without a hose, built to perform to U.S. Navy Class A standards at 198 feet while weighing just 6 ounces. It is rated for nitrox mixes up to 40% oxygen without special cleaning or parts, making it a straightforward, affordable choice for a primary or backup second stage.
Who it is for
The Alpha 8 suits divers who want a dependable, low-cost second stage to pair with an Oceanic first stage, whether as a primary breathing source or as an octopus (alternate air source) on a buddy setup. Its compact 2.9-inch front profile and 6-ounce weight (without hose) keep it unobtrusive on a rig, and its standard replacement parts can cost as little as half of comparable regulators in its class, which matters for divers budgeting for long-term maintenance.
Key details
- Valve type: demand, downstream, unbalanced, non-adjustable
- Mouthpiece: Oceanic's patented Orthodontic Mouthpiece, shaped to accommodate the natural overbite of the human jaw
- Nitrox compatibility: standard to 40% O2, no special cleaning or component changes required
- Minimum cracking effort: 1.1 CIW; factory set inhalation effort: 1.2 to 1.4 CIW
- Depth performance: engineered to U.S. Navy Class A standard at 198 feet
- Integrated purge button for quick clearing
Compatibility and sizing
The Alpha 8 is designed to connect to Oceanic first stages, including models in the SP5, PX-2, and SP-4 family, and can be configured as either a primary or an octopus second stage on those setups.
What's in the box
- Alpha 8 second stage only (hose not included)
DiveCatalog.com is an authorized Oceanic dealer and a dive shop in Irvine, California, serving divers since 2003. Call or chat with us at 888-701-4017 if you have questions about fit or compatibility with your current first stage.
- Orthodontic Mouthpiece: Oceanic's patented design accommodates the natural overbite of the human jaw to reduce jaw fatigue on long dives.
- Nitrox ready: Classified for use with gas mixtures up to 40% oxygen by volume without special preparation, cleaning, or component changes.
- Lightweight build: Weighs just 6 ounces without a hose and has a compact 2.9-inch front profile.
- Downstream demand valve: Unbalanced, non-adjustable design with a minimum cracking effort of 1.1 CIW and a factory set inhalation effort of 1.2 to 1.4 CIW.
- Depth rated performance: Engineered to perform to U.S. Navy Class A standards at 198 feet.
- Integrated purge button: Allows quick clearing of the second stage.
- Affordable upkeep: Standard replacement parts can cost as little as half of comparable regulators in its class.
- Second stage only: Sold without a hose, letting divers pair it with the hose and first stage of their choice.
- Primary or octopus use: Designed to work as either a primary second stage or an alternate air source (octopus).
| Valve Type | Demand, downstream, unbalanced, non-adjustable |
| Mouthpiece | Orthodontic |
| Nitrox Compatibility | Standard to 40% O2 |
| Weight (without hose) | 6 ounces |
| Front Profile Dimension | 2.9 inches |
| Minimum Cracking Effort | 1.1 CIW |
| Factory Set Inhalation Effort | 1.2 to 1.4 CIW |
| Depth Performance Standard | U.S. Navy Class A at 198 feet |
| Hose Included | No (second stage only) |
| Warranty | Limited Lifetime Warranty with Limited Lifetime Service Agreement when serviced biannually by an authorized Oceanic Service Technician; 30-Day Satisfaction Guarantee |
- Alpha 8 second stage (no hose included)
⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
How often does a scuba regulator need servicing?
Follow the interval in your regulator's manual, since manufacturers commonly specify an annual inspection or a set number of dives and many warranties depend on it. A regulator is life-support equipment, so service belongs with a factory-trained technician rather than being attempted at home. Have it looked at sooner than scheduled if you notice increased breathing effort, free-flow, bubbles, or water in the second stage.
How do I rinse and care for a regulator after diving?
Make sure the dust cap is dry and firmly seated over the first-stage inlet before the regulator goes anywhere near water, because water inside the first stage is the leading cause of internal corrosion. Rinse in fresh water without pressing the purge button, since purging while depressurized can draw water back into the second stage. Shake out the water and hang it to dry with the hoses in wide, gentle loops rather than tight bends.
Can I fly with a scuba regulator?
Regulators travel well and are usually best carried in hand luggage where they will not be crushed or lost. A regulator holds no gas of its own, so there is nothing inherently problematic about it on an aircraft, though the airline and security screeners always have the final say. Pack it dry with the dust cap in place, in a padded regulator bag or wrapped in soft gear.
Can I use my regulator with nitrox?
Many modern regulators are supplied as suitable for nitrox mixes up to 40 percent oxygen, which is the widely used recreational industry standard, while anything above that requires dedicated oxygen-clean equipment and procedures. Confirm what your specific regulator's manual states, and follow your nitrox training and your fill station's requirements. Never assume a regulator is oxygen-service clean simply because it looks clean or is new.
What is the difference between DIN and yoke regulators?
A yoke (A-clamp) fitting clamps over the tank valve and is the most common connection across much of the recreational world, while a DIN fitting screws into the valve and is standard in much of Europe and in technical diving. DIN captures the o-ring inside the threads, which many divers consider more secure, but yoke is often what rental cylinders provide. Adapters exist in both directions, so check what is used where you dive before deciding.
What is the octopus regulator for?
The octopus is your backup second stage, carried so you can share air with a buddy who is out of gas, or breathe from it yourself if your primary fails or free-flows. It is normally on a longer, brightly colored hose so it is easy to find and hand over under stress. Secure it in the triangle between your chin and the bottom of your rib cage so it is instantly accessible and not dragging through sand or coral.
How should I store a regulator between dive trips?
Store it fully dry, out of sunlight, with the dust cap in place and the hoses in wide loops rather than tightly coiled. Avoid hanging it by the second stages for long periods, which stresses the hose fittings; laying it flat in a padded bag or hanging it by the first stage is kinder. If it has sat unused for a long stretch, have it checked before your next trip rather than assuming it is ready to dive.
Does the Oceanic Alpha 8 come with a hose?
No, the Alpha 8 is sold as a second stage only, without a hose. Divers pair it with the hose and first stage of their choice, which is common for regulators sold as standalone second stages or configured as an octopus on an existing rig.
Can the Oceanic Alpha 8 be used as a primary or an octopus regulator?
Yes, the Alpha 8 is designed to work as either a primary second stage or as an octopus (alternate air source) when connected to a compatible Oceanic first stage. Its downstream, unbalanced demand valve and integrated purge button suit either role.
What first stages is the Oceanic Alpha 8 compatible with?
The Alpha 8 is designed to connect to Oceanic first stages, including models in the SP5, PX-2, and SP-4 family. Confirm fitment with your specific first stage model, and reach out to DiveCatalog.com if you need help matching components.
What warranty covers the Oceanic Alpha 8?
The Alpha 8 is backed by Oceanic's Limited Lifetime Warranty paired with a Limited Lifetime Service Agreement that covers replacement parts for the life of the regulator, as long as it is serviced biannually by an authorized Oceanic Service Technician. It also carries a 30-day satisfaction guarantee.












