Mares 26XR with HR Single Tank Regulator Set
In stock — ships from Irvine, CA
Mares 26XR with HR Single Tank Regulator Set is backordered and will ship as soon as it is back in stock.
Pickup currently unavailable at 23D
You May Need These
Description
Description
The 26XR-HR Single Tank Tek Set is built for divers who prefer a long hose setup on a single cylinder, while also offering a seamless path for transitioning to twinset diving by adding a second first stage in the future.
This versatile set includes two HR second stages, one 26XR first stage, and soft rubber LP hoses in 60 cm and 210 cm lengths, ready for immediate deployment. The first stage features 4 radial and 1 vertical low-pressure ports, providing flexible hose routing for technical diving.
The HR second stages deliver personalized breathing control via the Adjustable Breathing Comfort System and high, natural gas flow through the VAD system with a “Curved” Bypass. Its ultralight technopolymer case with Pneumatically Assisted Design (PAD) ensures comfort and performance, while the oversized purge button and durable rubber LP hose enhance reliability even with thick gloves.
The 26XR first stage incorporates Natural DFC on all LP ports, a TBP Dry Kit for environmental sealing, and AST (Auto Sealing Technology) to keep it dry, combining compact, lightweight design with technical versatility. With a G5/8 connection rated to 300 BAR (DIN), this set represents the pinnacle of technical diving equipment for exploration and adventure.
Features
Features
- 2ND STAGES
- Adjustable Breathing Comfort system allows the diver to control inhalation effort
- VAD System with “curved” bypass for natural high air flow at any depth
- Simple, high-performance, ultralight technopolymer case
- PAD – Pneumatically Assisted Design for extra comfort during inhalation
- Oversized purge button which is easy to use, even with thick gloves
- Rubber LP hose
- Greater resistance to cuts, abrasions, bursting and UV
- Less floating
- Natural DFC on all LP ports for high air flow at any depth
- TBP Dry Kit – Environmentally sealed for better performance on cold water dives
- AST - Auto Sealing Technology to keep the 1st stage dry
- Compact and lightweight
- 4 radial LP ports
- 1 vertical LP port
- 2 symmetrical, pre-oriented HP ports for perfect hose positioning
- G5/8 connection, 300 BAR (DIN)
Specifications
Specifications
| Material | Ultralight Technopolymer |
|---|---|
| First Stage Weight (DIN) | 683 g / 24 oz |
| First Stage Weight (NX) | 680 g / 23.9 oz |
| Second Stage Weight | 220 g / 7.7 oz |
| High Pressure Ports | 2 HP 7/16” UNF Ports |
| Low Pressure Ports | 4 Radial 3/8” UNF Ports - 1 Vertical 3/8” UNF Port |
| Hose Type | Rubber hose |
| Hose Length | 60 cm / 24 in – 210 cm / 7 ft |
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
How often does a scuba regulator need servicing?
Follow the interval in your regulator's manual, since manufacturers commonly specify an annual inspection or a set number of dives and many warranties depend on it. A regulator is life-support equipment, so service belongs with a factory-trained technician rather than being attempted at home. Have it looked at sooner than scheduled if you notice increased breathing effort, free-flow, bubbles, or water in the second stage.
How do I rinse and care for a regulator after diving?
Make sure the dust cap is dry and firmly seated over the first-stage inlet before the regulator goes anywhere near water, because water inside the first stage is the leading cause of internal corrosion. Rinse in fresh water without pressing the purge button, since purging while depressurized can draw water back into the second stage. Shake out the water and hang it to dry with the hoses in wide, gentle loops rather than tight bends.
Can I fly with a scuba regulator?
Regulators travel well and are usually best carried in hand luggage where they will not be crushed or lost. A regulator holds no gas of its own, so there is nothing inherently problematic about it on an aircraft, though the airline and security screeners always have the final say. Pack it dry with the dust cap in place, in a padded regulator bag or wrapped in soft gear.
Can I use my regulator with nitrox?
Many modern regulators are supplied as suitable for nitrox mixes up to 40 percent oxygen, which is the widely used recreational industry standard, while anything above that requires dedicated oxygen-clean equipment and procedures. Confirm what your specific regulator's manual states, and follow your nitrox training and your fill station's requirements. Never assume a regulator is oxygen-service clean simply because it looks clean or is new.
What is the difference between DIN and yoke regulators?
A yoke (A-clamp) fitting clamps over the tank valve and is the most common connection across much of the recreational world, while a DIN fitting screws into the valve and is standard in much of Europe and in technical diving. DIN captures the o-ring inside the threads, which many divers consider more secure, but yoke is often what rental cylinders provide. Adapters exist in both directions, so check what is used where you dive before deciding.
What is the octopus regulator for?
The octopus is your backup second stage, carried so you can share air with a buddy who is out of gas, or breathe from it yourself if your primary fails or free-flows. It is normally on a longer, brightly colored hose so it is easy to find and hand over under stress. Secure it in the triangle between your chin and the bottom of your rib cage so it is instantly accessible and not dragging through sand or coral.
How should I store a regulator between dive trips?
Store it fully dry, out of sunlight, with the dust cap in place and the hoses in wide loops rather than tightly coiled. Avoid hanging it by the second stages for long periods, which stresses the hose fittings; laying it flat in a padded bag or hanging it by the first stage is kinder. If it has sat unused for a long stretch, have it checked before your next trip rather than assuming it is ready to dive.



