DiveCatalog Hose Protector for Regulators and other Scuba Gear Scuba Essentials
In stock — ships from Irvine, CA
This item is currently on backorder. Order now to reserve yours, and we will ship it as soon as it is back in stock.
DiveCatalog Hose Protector for Regulators and other Scuba Gear Scuba Essentials is backordered and will ship as soon as it is back in stock.
Pickup available at In Store
Usually ready in 2 hours
DiveCatalog Hose Protector for Regulators and other Scuba Gear Scuba Essentials is backordered and will ship as soon as it is back in stock.
-
DiveCatalog DIN Cap for 1st Stage (Female) for Scuba Diving Tanks - Scuba Essentials
$19.95$2.00
1 -
DiveCatalog Hose Clamp for Scuba Diving - Scuba Essentials
$17.95$1.80
1 -
DiveCatalog Neoprene Mask Strap Cover
$17.00$1.70
1 -
DiveCatalog Silicone Mouthpiece Replacement w/ installation - Scuba Essentials
$14.95$1.50
1 -
DiveCatalog Rubber Tank Valve Protector for Scuba Diving Tanks - Scuba Essentials
$11.95$1.20
1
-
DiveCatalog Fin Strap and Scuba Dive Accessory Holder Scuba Accessory Essentials
$9.95$1.00
1 -
DiveCatalog Female Quick Release Clip with Bungee cord for Scuba Accessory Essentials
$8.99$0.90
1 -
DiveCatalog.com Scuba Mouthpiece Cover
$7.95$0.80
1 -
DiveCatalog Scuba Essentials - PVC Tank Valve Protector for Scuba Diving Tanks
$5.95$0.60
1 -
Multi-Purpose Clip with Male and Female Quick Release Clip and Bungee Cord Scuba Accessory Essentials by DiveCatalog
$5.95$0.60
1 -
Whistle with Lanyard in Orange by DiveCatalog
$5.00$0.50
1 -
DiveCatalog.com Stainless Steel 2 Inch Webbing Keeper with Serrated Teeth Weights
$1.95$0.20
1 -
DiveCatalog.com Weight Keeper Stopper - Black
$1.45$0.15
1
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Product Information
The DiveCatalog Hose Protector is a flexible PVC sleeve that slides over a scuba regulator or inflator hose at the point where it meets the first stage fitting, the spot where hoses see the most bending stress and are most likely to kink, crack, or wear out over time.
Who it is for
This protector suits any diver who wants to extend the working life of their regulator setup, whether that means adding preventive protection to a brand new hose before it ever gets used, or reinforcing an existing hose that is already showing early signs of wear near the fitting. It works on regulator hoses, inflator hoses, and other standard dive equipment lines.
Key details
- Made from flexible PVC that slides onto the hose and stays in place during use.
- Positioned at the first-stage fitting junction, the area where repeated bending causes the most wear.
- Reduces kinking and the bending stress that leads to cracking and eventual hose failure.
- Does not restrict hose movement or routing once installed.
- Fits standard scuba regulator and inflator hoses.
Compatibility and sizing
The sleeve fits standard scuba regulator and inflator hoses, as well as other standard dive equipment lines. It can be fitted to a new hose as a preventive measure or added to a hose that is already in service.
DiveCatalog.com is a dive shop based in Irvine, California, and the Hose Protector is part of its in-house Scuba Essentials accessory line. Call or chat with the DiveCatalog team if you have questions about fit on your specific hose before ordering.
- PVC sleeve protects a hose at the first-stage fitting junction, where stress and wear concentrate.
- Kink reduction supports the hose through repeated bending to reduce kinking at the fitting.
- Extended hose life helps prevent the cracking that develops from long-term bending stress.
- Flexible PVC construction slides onto standard scuba hoses and stays in place during use.
- Broad compatibility suits regulator hoses, inflator hoses, and other standard dive equipment lines.
- Unrestricted routing adds protection without limiting hose movement or routing.
- Preventive or corrective use can be fitted to new hoses before wear starts or to existing hoses showing early signs of damage.
| Brand | DiveCatalog |
| Product Type | Hose protector sleeve |
| SKU | DC-ACC-HOSEPRO |
| MPN | DC-ACC-HOSEPRO |
| Material | Flexible PVC |
| Fits | Standard scuba regulator and inflator hoses |
| Use | Protecting hoses from kinking and wear at the fitting |
⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
Will the hose protector fit inflator hoses as well as regulator hoses?
Yes. The sleeve fits standard scuba regulator and inflator hoses, and it stays in place without restricting hose movement or routing.
Can I install this on a hose I already own, or only new hoses?
It works for both. You can slide it onto a brand new hose as preventive protection before the first dive, or fit it onto a hose that is already in service and showing early signs of wear or kinking near the first-stage fitting to help slow further damage.
Is the hose protector limited to a specific regulator brand?
No. It fits standard scuba regulator and inflator hoses and other standard dive equipment lines. Contact DiveCatalog if unsure about your hose.
What is the hose protector made of?
It is made from flexible PVC. This material slides onto the hose at the first-stage fitting junction, stays in place during use, and flexes with the hose rather than restricting its natural movement or routing.
