HOSE, MIFLEX, 36/92CM YELLOW

Name: HOSE, MIFLEX, 36/92CM YELLOW
Brand: Hollis
SKU: 204.2383.036.M
Price: 54.95 USD
Availability: OutOfStock

Hollis | SKU: 204.2383.036.M

Refer & Earn

Sold out

$54.95

Shipping calculated at checkout.

Pick accessories — 90% off with your $50+ order

Start $501 pick $1252 picks

DiveCatalog DIN Cap for 1st Stage (Female) for Scuba Diving Tanks - Scuba Essentials
$19.95$2.00

1
DiveCatalog Hose Clamp for Scuba Diving - Scuba Essentials
$17.95$1.80

1
DiveCatalog Neoprene Mask Strap Cover
$17.00$1.70

1
DiveCatalog Silicone Mouthpiece Replacement w/ installation - Scuba Essentials
$14.95$1.50

1
DiveCatalog Rubber Tank Valve Protector for Scuba Diving Tanks - Scuba Essentials
$11.95$1.20

1

90% off applies automatically at checkout on orders of $50+ — or free for signed-in members. Not combinable with discount codes.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Product Information

The Hollis Miflex 36-inch (92 cm) Low Pressure Hose is a yellow regulator hose manufactured by Miflex in Italy, built with a multi-layer construction and a polyether-based polyurethane inner liner, and EN250 approved for use with gas mixtures up to 40% oxygen.

Who it is for

This hose suits divers who are replacing a worn low pressure hose on a Hollis or compatible regulator setup, or upgrading to a Miflex hose for its lightweight, flexible, kink-resistant design. It is also suited to divers who dive nitrox mixes up to 40% oxygen, since the hose is rated and approved for that gas range.

Key details

Length: 36 inches (92 centimeters)
Color: Yellow
Construction: Multi-layer hose body with a polyether-based polyurethane inner liner, not PVC
Certification: EN250 approved
Oxygen rating: Approved for gas mixtures up to 40% oxygen
Manufactured in Italy and individually factory tested
Each hose is individually marked with the Miflex logo and a date code
SKU: 204.2383.036.M

Compatibility and sizing

This 36-inch (92 cm) yellow hose is one of several published Miflex low pressure hose lengths from Hollis, alongside 22 inches (56 cm) and 32 inches (76 cm).

DiveCatalog.com is an authorized Hollis dealer and has been a dive shop in Irvine, California since 2003. Call 888-701-4017 or chat with us if you have questions about fit or compatibility with your current regulator.

⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

Frequently Asked Questions

Is the Hollis Miflex 36-inch low pressure hose compatible with nitrox?

Yes. This hose is approved for use with gas mixtures up to 40% oxygen. It is also EN250 approved and individually tested at the factory in Italy.

What other lengths does this Miflex low pressure hose come in?

This Miflex low pressure hose is published in 22 inches (56 cm), 32 inches (76 cm), and 36 inches (92 cm). This yellow 36-inch version is SKU 204.2383.036.M.

What makes the Miflex hose different from a standard PVC hose?

The inner liner on this Miflex hose is made from polyether-based polyurethane instead of PVC, which is used in some lower-priced imitation hoses. The hose also uses a multi-layer construction designed to be lightweight, flexible, kink-resistant, and resistant to abrasion.

Is this Miflex hose certified for scuba use?

Yes. The hose is EN250 approved and each unit is individually tested at the factory in Italy. Every hose is also individually marked with the Miflex logo and a date code.

86%

(1178)

(114)

(37)

(16)

(31)

Like dis

Like dis project

Excellent wetsuit but will it crush quickly like other wetsuits?

I purchased a BARE 5mm Reactive wetsuit (open box), which was like new, to replace my 1.5 yr old BARE 5mm Velocity wetsuit which had collapsed to only 2.5mm after 3 diving trips (~100 dives). The Reactive wetsuit is well constructed and very flexible. I had to increase the size of the Reactive suit, as it was smaller than the BARE Velocity suit of the same size. Tremendous customer service by Dive Catalog to exchange the wetsuit for proper size. I hope the Reactive suit does not crush so quickly like my other wetsuits (BARE, Henderson, Pinnacle). Hoping that the new technology in this suit will keep me warm below the thermocline.

Perfectly Built

Best of the many many diver hangers in my life. Easily supports my steel-plated BCD, while still donned with all of my accessories. No cracks, bends, or dents. Has even supported my BCD w/ a steel 100 tank attached (not recommended, for safety purposes, though).

Will continue to use this hanger for the long-term. No brainer.

Go-to Dive Hanger

This is a must-have for every diver. It's the quintessential hanger for all dive gear in one small package.

DiveCatalog's "Quick Dry Multi Accessory Dive Gear Hanger for Boots, Gloves, Hood" is set at a great price for a great product. Versatile enough that I've purchased extra hangers to organize my BMX racing gear.

Must-have for divers and anyone looking to organize their adventurous outdoor activities equipment.

Solid Hanger w/ Tons of Options

Does it's job and then some. The added accessory arms gives you options for a multitude of storage solutions. Solid build, solid pricing, must have for owns of dive gear.

Brand	Miflex (sold by Hollis)
Length	36 inches (92 centimeters)
Color	Yellow
SKU	204.2383.036.M
Construction	Multi-layer hose
Inner liner material	Polyether-based polyurethane (not PVC)
Certification	EN250
Oxygen rating	Up to 40% oxygen
Country of manufacture	Italy
Testing	Individually tested at the factory
Marking	Individually marked with Miflex logo and date code