Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Product Information
The Hollis DC7 First Stage Dive Regulator is an over-balanced first stage that delivers progressively greater intermediate pressure as depth and gas density increase, giving steady gas delivery in demanding conditions. It is built to the CE coldwater performance standard, is nitrox compatible to 40%, and ships with fixed hose routing that works for both backmount and sidemount setups. It is sold separately as a DIN or YOKE connection.
Who it is for
This first stage suits divers who want a dependable, cold-water-rated regulator for technical, sidemount, or backmount configurations, including cold water, deep, or high-workload dives where consistent gas delivery matters most. Because it is nitrox compatible to 40%, it also fits recreational divers who regularly dive enriched air.
Key details
- 2 high pressure ports and 4 low pressure ports for gauges, computers, and hoses
- Environmental sealing protects internal components from corrosion, contaminants, and icing
- Fixed hose routing designed for backmount or sidemount configuration
- Engineered to meet the CE standard for coldwater performance
- Nitrox compatible to 40% oxygen
Compatibility and sizing
The Hollis DC7 is available in two connection options: a DIN/300 bar fitting (SKU 240.3568) or a YOKE fitting (SKU 240.3567). Choose the connection that matches your tank valve, since the DC7 is sold as separate DIN/300 bar and YOKE versions.
DiveCatalog.com is an authorized Hollis dealer and has operated as a dive shop in Irvine, California since 2003. Call 888-701-4017 or start a chat if you have questions about which DC7 connection or configuration fits your setup.
- Over-balanced design: Delivers progressively greater intermediate pressure as depth and gas density increase for consistent gas delivery.
- Fixed hose routing: Suited for both backmount and sidemount configurations.
- Environmental sealing: Prevents internal corrosion, contaminants, and icing of the first stage.
- CE coldwater rated: Designed to withstand the rigorous CE standard for coldwater performance.
- Nitrox compatible: Rated for use with nitrox mixes up to 40% oxygen.
- Port configuration: 2 high pressure ports and 4 low pressure ports.
- Connection options: Available in DIN/300 bar or YOKE.
| Brand | Hollis |
| Model | DC7 First Stage |
| Product Type | Regulator First Stage Only |
| High Pressure Ports | 2 |
| Low Pressure Ports | 4 |
| Connection Type | DIN/300 bar (YOKE option also available) |
| Hose Routing | Fixed, suitable for backmount or sidemount configuration |
| Environmental Sealing | Yes |
| Nitrox Compatibility | Up to 40% |
| Certification | CE coldwater performance standard |
| Available Variants | DIN (SKU 240.3568), YOKE (SKU 240.3567) |
⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
How often does a scuba regulator need servicing?
Follow the interval in your regulator's manual, since manufacturers commonly specify an annual inspection or a set number of dives and many warranties depend on it. A regulator is life-support equipment, so service belongs with a factory-trained technician rather than being attempted at home. Have it looked at sooner than scheduled if you notice increased breathing effort, free-flow, bubbles, or water in the second stage.
How do I rinse and care for a regulator after diving?
Make sure the dust cap is dry and firmly seated over the first-stage inlet before the regulator goes anywhere near water, because water inside the first stage is the leading cause of internal corrosion. Rinse in fresh water without pressing the purge button, since purging while depressurized can draw water back into the second stage. Shake out the water and hang it to dry with the hoses in wide, gentle loops rather than tight bends.
Can I fly with a scuba regulator?
Regulators travel well and are usually best carried in hand luggage where they will not be crushed or lost. A regulator holds no gas of its own, so there is nothing inherently problematic about it on an aircraft, though the airline and security screeners always have the final say. Pack it dry with the dust cap in place, in a padded regulator bag or wrapped in soft gear.
Can I use my regulator with nitrox?
Many modern regulators are supplied as suitable for nitrox mixes up to 40 percent oxygen, which is the widely used recreational industry standard, while anything above that requires dedicated oxygen-clean equipment and procedures. Confirm what your specific regulator's manual states, and follow your nitrox training and your fill station's requirements. Never assume a regulator is oxygen-service clean simply because it looks clean or is new.
What is the difference between DIN and yoke regulators?
A yoke (A-clamp) fitting clamps over the tank valve and is the most common connection across much of the recreational world, while a DIN fitting screws into the valve and is standard in much of Europe and in technical diving. DIN captures the o-ring inside the threads, which many divers consider more secure, but yoke is often what rental cylinders provide. Adapters exist in both directions, so check what is used where you dive before deciding.
What is the octopus regulator for?
The octopus is your backup second stage, carried so you can share air with a buddy who is out of gas, or breathe from it yourself if your primary fails or free-flows. It is normally on a longer, brightly colored hose so it is easy to find and hand over under stress. Secure it in the triangle between your chin and the bottom of your rib cage so it is instantly accessible and not dragging through sand or coral.
How should I store a regulator between dive trips?
Store it fully dry, out of sunlight, with the dust cap in place and the hoses in wide loops rather than tightly coiled. Avoid hanging it by the second stages for long periods, which stresses the hose fittings; laying it flat in a padded bag or hanging it by the first stage is kinder. If it has sat unused for a long stretch, have it checked before your next trip rather than assuming it is ready to dive.
Can the Hollis DC7 be used for sidemount diving?
Yes, the Hollis DC7 has fixed hose routing designed to work for both backmount and sidemount configurations, so it can be set up either way without changing first stages. Divers switching between backmount and sidemount rigs can use the same DC7 first stage for both setups.
How many ports does the Hollis DC7 first stage have?
The Hollis DC7 has 2 high pressure ports and 4 low pressure ports. The high pressure ports typically accommodate a pressure gauge or dive computer transmitter, while the four low pressure ports support hoses for the primary second stage, octopus, BCD inflator, and drysuit inflator or similar accessories.
Is the Hollis DC7 suitable for cold water diving?
Yes, the Hollis DC7 is engineered to meet the CE standard for coldwater performance and includes environmental sealing that prevents internal corrosion, contaminants, and icing of the first stage. This makes it a solid choice for divers who regularly dive in cold water.
Should I choose the DIN or YOKE version of the Hollis DC7?
The Hollis DC7 is sold in two separate SKUs, a DIN/300 bar version (240.3568) and a YOKE version (240.3567); choose the one matching your tank valve. DIN is standard in much of Europe and technical diving, while YOKE is common across recreational diving in many other regions.













