Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Product Information
The Hollis 2" D-Ring Bent Stainless is a 2 inch stainless steel D-ring with a bent profile, built as a buoyancy accessory attachment point for scuba divers. It carries Hollis SKU 210.8024 and sits in Hollis's Buoyancy Accessories lineup.
Who it is for
This D-ring suits divers who need to add, replace, or upgrade an attachment point on a BCD, harness, or webbing setup. Technical and recreational divers alike use D-rings like this one to clip on accessories such as lights, cutting tools, reels, and SPGs, so it is a practical pick for anyone customizing their rig or repairing a worn or missing D-ring.
Key details
- Material: Stainless steel
- Size: 2 inch nominal
- Shape: Bent
- SKU / MPN: 210.8024
Hollis lists this part as bent, distinguishing it from the non-bent 2" D-Ring Stainless, SKU 210.8023, also sold by Hollis.
Compatibility and sizing
The listed size is 2 inches nominal. Hollis does not publish further dimensional or load-rating specifications for this part, so divers mounting it on a specific BCD or harness system should confirm fit against their existing webbing width before ordering.
DiveCatalog.com is an authorized Hollis dealer and has operated as a dive shop in Irvine, California since 2003. Call 888-701-4017 or start a chat if you have questions about fit or compatibility with your current gear.
- Stainless steel construction, the only material Hollis publishes for this D-ring.
- Bent profile, as published by Hollis, distinguishing it from the straight 2 inch stainless D-ring.
- 2 inch nominal size is the only dimension Hollis publishes for this D-ring.
- Hollis SKU 210.8024 identifies this exact bent, stainless D-ring variant.
- Part of Hollis's Buoyancy Accessories category, grouped with other hardware used to customize BCDs and harnesses.
- Related straight variant available as Hollis SKU 210.8023 for divers who prefer a non-bent D-ring.
| Brand | Hollis |
| Product Name | 2" D-Ring Bent Stainless |
| SKU | 210.8024 |
| MPN | 210.8024 |
| Barcode | 020545202103 |
| Size | 2 inch |
| Material | Stainless steel |
| Shape | Bent |
| Category | Buoyancy Accessories |
⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
What does "bent" mean on this D-ring?
The bent designation describes the ring's shape, which differs from a straight D-ring profile. Hollis sells both versions, this bent stainless D-ring as SKU 210.8024 and a straight version as SKU 210.8023, so divers can choose the shape that fits their webbing or harness setup best.
Is the Hollis 2" D-Ring Bent Stainless resistant to corrosion?
Yes, it is made from stainless steel, a material commonly used in dive hardware for its resistance to corrosion in both salt and fresh water. Hollis does not publish a specific grade of stainless steel for this part.
What size is the Hollis 2" D-Ring Bent Stainless?
It is a 2 inch nominal size D-ring, as listed on the Hollis product page. No additional dimensions, such as wire gauge or load rating, are published by the manufacturer for this part.
Will this D-ring fit my existing BCD or harness?
Hollis does not publish compatibility details for specific BCD or harness models for this D-ring. Since it is sized at 2 inches nominal, check the webbing width and existing D-ring mounting points on your gear, or contact DiveCatalog.com for help confirming fit.












