You May Need These
Description
Description
Designed for diving enthusiasts looking to capture stunning underwater content, this kit enhances underwater photography by correcting color distortions commonly found in different water bodies. It includes a red filter and a magenta filter, each tailored to optimize image quality based on diving conditions.
The red filter is ideal for scuba diving in blue and tropical waters, restoring the warm colors and vibrancy lost at depth, making marine life and coral reefs appear more vivid. The magenta filter is perfect for green, freshwater environments, such as lakes and rivers, adjusting the color balance for more natural, true-to-life underwater shots.
Both filters are easy to attach and switch, allowing seamless transitions between diving environments without interruptions. Enhance your underwater photography and videography with the SeaTouch 4 Max Plus Filter Kit, ensuring your underwater memories remain as brilliant as your experiences.
Disclaimer: DIVEVOLK underwater housings are precision-engineered to keep your phone safe during dives. However, flooding may occur if the housing is not fully sealed or if the phone is not properly aligned and securely seated. Please carefully follow all instructions provided by DIVEVOLK and perform a seal check before each dive. We are not responsible for any damage resulting from improper use, assembly errors, or failure to ensure a complete seal. Use at your own risk.
Features
Features
- Underwater color restoration solution: Perfect for both seawater and freshwater diving, eliminating the need for complex post-editing while ensuring vibrant, true-to-life underwater photography.
- Underwater full touchscreen housing: Provides complete access to all functions on your phone, enhancing usability and convenience.
- Red filter: Designed for color restoration in seawater, bringing back natural hues and improving image quality in deep blue environments.
- Magenta filter: Optimizes color correction for freshwater diving, ensuring clarity and accurate color representation in lakes and rivers.
- Expansion clamp: Offers versatile mounting options, allowing you to attach additional accessories for a customized underwater setup.
- Protective cover: Shields the housing membrane from potential damage, extending durability and ensuring long-lasting performance.
- Compact travel case: Efficiently designed to save luggage space, making it easy to carry and store your underwater photography gear.
Specifications
Specifications
| Specification | Details |
|---|---|
| 60m/200ft waterproof | |
| Sensitive touchscreen | 30m/100ft |
| Touch Screen Life | 100,000 times |
| Dimension | 226*120*44 mm |
| Weight | 375g (On land), about 150g (Underwater) |
| Applicable to smartphone models | Within 180*82.5*11.2 mm (length x width x thickness) |
| Thickness of the mobile phone lens | Should not exceed 15mm |
What's Included
What's Included
- SeaTouch 4 Max Plus underwater full touchscreen housing
- 67mm lens adapter with expansion clamp
- Red filter 67mm
- Magenta filter 67mm
- Multifunctional camouflage protective cover
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
How do I check an underwater housing's seal before a dive?
Before every dive, open the housing somewhere clean and dry, inspect and wipe the main o-ring and its groove, and close it with nothing trapped in the seal, because a single hair or grain of sand is enough to flood it. Confirm every latch is fully closed and that any vacuum or leak alarm reads correctly. Where you can, soak the sealed housing in a rinse tank or hang at the surface before descending, so a leak shows up before depth.
How do I care for housing o-rings?
Remove the main o-ring regularly with a plastic tool rather than anything metal, which can nick the groove, and clean both the o-ring and the groove with a lint-free cloth. Apply a thin film of the silicone grease the manufacturer specifies, since grease helps the o-ring seat and slide rather than sealing by itself, and a thick coat only collects grit. Replace o-rings on the schedule in the manual, or sooner if they look flattened, cut, or dry.
What do moisture alarms and desiccant packs do?
A moisture alarm is a sensor inside the housing that beeps or flashes when it detects water, giving you a chance to abort the dive before the camera is ruined. Desiccant packs absorb humidity in the air sealed inside the housing, which prevents the port fogging as you descend into cooler water. Neither replaces a proper seal check, since they provide early warning and fog control rather than leak prevention.
How deep can I take an underwater camera housing?
Only as deep as its rated depth, which the manufacturer sets and publishes in the specifications, and it should never be exceeded even briefly. Depth ratings assume a housing in good condition with intact seals, so worn o-rings or a damaged port reduce the real margin. If your diving might take you deeper, choose a housing rated comfortably beyond your planned maximum depth.
Can I use a phone housing for scuba diving?
Only if the housing is specifically rated for the depth you plan to dive, because many phone cases are splash- or snorkel-rated rather than scuba-rated. Touchscreens generally do not respond underwater, so a diving phone housing needs mechanical buttons or another control method. A phone's own water-resistance rating is not a substitute for a housing, and any housing still needs seal checks and o-ring care.
How do I rinse a camera housing after diving?
Soak the closed, sealed housing in fresh water and work every button and dial while it is submerged so salt does not dry inside the control shafts. Let it dry completely, especially around latches and seams, before you open it, since opening a wet housing drips water straight onto the camera. Avoid opening a housing on a wet, moving boat deck whenever you have the option to wait.
What should I do if my housing floods?
Get the housing out of the water and open it somewhere dry, then immediately remove the camera's battery and memory card, because leaving a battery in a wet camera does more damage than the water itself. Do not power the camera on to check whether it still works. Dry everything gently away from direct heat, get salt-water-exposed equipment to a repair technician promptly, and inspect the housing to find which seal failed before you dive it again.
