| YOUR SIZE | XS | S | M | L | XL | 2XL |
|---|---|---|---|---|---|---|
| FOREHEAD | 21 in | 21.5 in | 22.5 in | 23.5 in | 24 in | 24.5 in |
| NECK | 13 in | 14 in | 15 in | 16 in | 17 in | 18 in |
You May Need These
Description
Description
The Bare 7mm Step-In Womens Hooded Vest adds warmth and flexibility to your scuba and diving gear. Designed as a full-stretch layering piece, it pairs with any 7mm or 5mm full suit to help you stay comfortable on colder underwater sessions.
Made from 7MM S-FLEX FULL-STRETCH neoprene, it delivers exceptional stretch for easy in/out and unrestricted movement. The attached hood is 7MM with a 5MM skin-in face seal to minimize water entry, while skin-in seals around the shoulders reduce flushing and enhance warmth. A heavy-duty front zipper supports durable, repeated donning and doffing, making it a practical layer for cold-water diving and other underwater activities.
Features
Features
- 7MM S-FLEX FULL-STRETCH neoprene for extreme comfort and mobility in scuba and diving gear
- Attached 7MM vented hood with a 5MM skin-in face seal
- Skin-in seals around the shoulders to minimize flushing and improve warmth
- Heavy-duty front zipper for reliable performance during repeated donning and doffing
- FULL-STRETCH design to layer with any 7mm or 5mm full suit
Specifications
Specifications
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
What thickness of dive boots, gloves, or hood should I choose?
As a general rule, thicker neoprene insulates more, so colder water pushes you toward thicker accessories, but fit, dive length, and personal cold tolerance matter as much as the millimeter number. Divers commonly lose a great deal of heat through the head, so a hood is often the highest-value warmth upgrade for the money. Remember that every added piece of neoprene also adds buoyancy you will need to account for.
How should dive boots fit?
Boots should fit like a snug athletic shoe, with no heel lift and no crushed toes; a little water inside is normal, a sloshing pocket is not. Try them on with the socks you would actually dive, and remember your fin foot pocket has to accommodate the boot. Hard-sole boots protect on rocky shore entries, while soft-sole boots are lighter and pack smaller for boat and travel diving.
How should dive gloves fit?
Gloves should be snug across the palm with fingertips reaching the ends without bunching, since trapped air and loose fingertips destroy dexterity. Thicker gloves are warmer but make buckles, clips, and inflator buttons harder to operate, so choose the thinnest glove that keeps you comfortable in your conditions. Try working a clip or buckle while wearing them before you commit.
How should a dive hood fit?
A hood should seal around the face and neck without restricting your throat or jaw, and lie flat on your head without pulling the mask strap out of position. A loose hood flushes cold water continuously, while an overly tight one is distracting and uncomfortable. Many hoods have a vent to release air trapped during descent, so check yours and burp out any trapped air before you go down.
Why does new neoprene feel so tight?
New neoprene compresses and relaxes with use, so a boot, glove, or hood that feels firm out of the packaging usually settles slightly after a few dives. It should still be snug afterward rather than loose, because neoprene that stretches into a loose fit was probably oversized to begin with. Buy for a snug fit when new, but never for a fit that restricts circulation or breathing.
Do I need to change my weighting when I add a hood, gloves, and boots?
Yes, because every piece of neoprene you add is buoyancy, and a hood, boots, and thick gloves together can shift your weighting noticeably. Do a proper buoyancy check any time you change your exposure protection rather than assuming your usual weight still works. The weight-check procedure is covered in your training, and a dive professional can help you re-do it.
How do I care for dive boots, gloves, and hoods?
Rinse them inside and out in fresh water after every dive day, since they hold sweat and salt more than any other gear, and dry them fully inside-out before packing. Dry them out of direct sunlight and never on a heater, because heat hardens neoprene and weakens glued seams. Store them dry and unfolded, as damp neoprene sealed in a bag is how gear picks up a permanent smell.
