Atomic Aquatics M1 Octopus, 36" hose, Yellow
In stock — ships from Irvine, CA
Atomic Aquatics M1 Octopus, 36" hose, Yellow is backordered and will ship as soon as it is back in stock.
Pickup currently unavailable at 23D
You May Need These
Description
Description
The Atomic Aquatics M1 Octopus is a high-visibility Safe Second designed to pair with the M1 primary for reliable performance in demanding underwater environments. Built for extreme diving, it serves as a dependable backup in cave diving, cold water, and rough seas, ensuring your scuba gear has a trusted secondary option.
Long-hose reliability meets practical visibility with a 36-inch hose and a neon-yellow front cover, making it easier to locate and reach in underwater situations. The M1 OCTO shares core M1 technology, including Automatic Flow Control and a Titanium Seat Saving Dynamic Orifice, while remaining compatible with higher oxygen mixes when established guidelines are followed.
Features
Features
- 36" hose and neon-yellow front cover — long hose length and high-visibility design enhance positioning and recognition during underwater dives.
- High-performance valve body — Zirconium plated brass demand valve with a heat sink for fast thermal transfer and reduced freezing in cold water.
- Automatic Flow Control (AFC) — patented AFC with a Rapid Adjustment Knob allows manual tuning in special diving situations, improving breathing stability.
- Titanium Seat Saving Dynamic Orifice — minimizes wear on the low-pressure seat to extend service intervals and boost reliability.
- Thermal management — thermal heat sink designed to minimize freezing risk in cold-water diving environments.
- Exhaust and front-cover protection — super-dry exhaust valve and surge-protected front cover perform reliably in rough water and high-current scenarios.
- Comfort and mobility — patented Comfort Swivel provides approximately 30° range of motion without hose binding, pulling, or kinking during underwater maneuvers.
- Underwater compatibility — designed for scuba gear and diving setups that require a dependable backup octopus, with compatibility for higher oxygen mixes when guidelines are followed.
Specifications
Specifications
M1 MONEL OCTO
A SAFE SECOND FOR HIGHER O2 MIXTURES
ATOMIC PRIMARY FEATURES BUILT INTO A SAFE SECOND
PATENTED COMFORT SWIVEL
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
How often does a scuba regulator need servicing?
Follow the interval in your regulator's manual, since manufacturers commonly specify an annual inspection or a set number of dives and many warranties depend on it. A regulator is life-support equipment, so service belongs with a factory-trained technician rather than being attempted at home. Have it looked at sooner than scheduled if you notice increased breathing effort, free-flow, bubbles, or water in the second stage.
How do I rinse and care for a regulator after diving?
Make sure the dust cap is dry and firmly seated over the first-stage inlet before the regulator goes anywhere near water, because water inside the first stage is the leading cause of internal corrosion. Rinse in fresh water without pressing the purge button, since purging while depressurized can draw water back into the second stage. Shake out the water and hang it to dry with the hoses in wide, gentle loops rather than tight bends.
Can I fly with a scuba regulator?
Regulators travel well and are usually best carried in hand luggage where they will not be crushed or lost. A regulator holds no gas of its own, so there is nothing inherently problematic about it on an aircraft, though the airline and security screeners always have the final say. Pack it dry with the dust cap in place, in a padded regulator bag or wrapped in soft gear.
Can I use my regulator with nitrox?
Many modern regulators are supplied as suitable for nitrox mixes up to 40 percent oxygen, which is the widely used recreational industry standard, while anything above that requires dedicated oxygen-clean equipment and procedures. Confirm what your specific regulator's manual states, and follow your nitrox training and your fill station's requirements. Never assume a regulator is oxygen-service clean simply because it looks clean or is new.
What is the difference between DIN and yoke regulators?
A yoke (A-clamp) fitting clamps over the tank valve and is the most common connection across much of the recreational world, while a DIN fitting screws into the valve and is standard in much of Europe and in technical diving. DIN captures the o-ring inside the threads, which many divers consider more secure, but yoke is often what rental cylinders provide. Adapters exist in both directions, so check what is used where you dive before deciding.
What is the octopus regulator for?
The octopus is your backup second stage, carried so you can share air with a buddy who is out of gas, or breathe from it yourself if your primary fails or free-flows. It is normally on a longer, brightly colored hose so it is easy to find and hand over under stress. Secure it in the triangle between your chin and the bottom of your rib cage so it is instantly accessible and not dragging through sand or coral.
How should I store a regulator between dive trips?
Store it fully dry, out of sunlight, with the dust cap in place and the hoses in wide loops rather than tightly coiled. Avoid hanging it by the second stages for long periods, which stresses the hose fittings; laying it flat in a padded bag or hanging it by the first stage is kinder. If it has sat unused for a long stretch, have it checked before your next trip rather than assuming it is ready to dive.
