Tusa RS1001 Dive Regulator Set Suitable for Cold Water Diving
In stock — ships from Irvine, CA
This item is currently on backorder. Order now to reserve yours, and we will ship it as soon as it is back in stock.
Tusa RS1001 Dive Regulator Set Suitable for Cold Water Diving is backordered and will ship as soon as it is back in stock.
Pickup available at In Store
Usually ready in 2 hours
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Save with a package
Ready-made packages that include this item
Product Information
The TUSA RS1001 Dive Regulator Set pairs the balanced diaphragm R1000 first stage with the S0001 second stage, built with a cold water insulation system and an environmentally sealed design, and available in Yoke or RS1001 DIN (300 bar/4350 psi) connections.
Who it is for
This set suits divers who want a regulator protected from salt, sand, chlorine, and pool chemicals through its environmentally sealed design, and who dive in cold water where the insulation system helps maintain performance. The ambidextrous S0001 second stage lets a diver route the hose to either the left or right side, and the choice between a Yoke RS1001 and a DIN-fitted RS1001 DIN (300 bar/4350 psi) covers divers using either tank valve standard.
Key details
- R1000 first stage uses a balanced diaphragm design with an improved HP poppet assembly for enhanced reliability and minimizes intermediate pressure fluctuation as tank pressure changes.
- Two high-pressure ports and four low-pressure ports (2 standard, 2 high-flow); the high-flow LP ports provide approximately 15% increased air delivery.
- S0001 second stage has a lightweight composite case, a venturi flow adjustment lever, and an ortho-conscious mouthpiece design.
- DIN version available as RS1001 DIN, rated to 300 bar/4350 psi.
Compatibility and sizing
The set is offered with a Yoke connection as the standard RS1001, or with a DIN connection as the RS1001 DIN rated to 300 bar/4350 psi, so divers can match it to the tank valve fitting they use.
DiveCatalog.com is an authorized TUSA dealer and a dive shop based in Irvine, California, serving divers since 2003. Call 888-701-4017 or start a chat if you have questions about fit, DIN versus Yoke, or compatibility before you order.
- Cold water insulation system helps the regulator maintain performance in cooler water.
- Environmentally sealed design protects internal components from salt, sand, chlorine, and pool chemicals.
- Improved HP poppet assembly in the R1000 first stage adds enhanced reliability.
- Balanced diaphragm first stage minimizes intermediate pressure fluctuation as tank pressure changes.
- Two HP ports and four LP ports are included, with 2 LP ports standard and 2 high-flow.
- High-flow LP ports deliver approximately 15% increased air flow.
- DIN version available as RS1001 DIN, rated to 300 bar/4350 psi.
- Lightweight composite second stage case is used on the S0001.
- Ambidextrous configuration allows left- or right-hand hose routing on the second stage.
- Venturi flow adjustment lever is built into the S0001 second stage.
- Ortho-conscious mouthpiece design is fitted to the second stage.
| Brand | TUSA |
| Model | RS1001 |
| First Stage | R1000, balanced diaphragm design |
| Second Stage | S0001 |
| Connection | Yoke (DIN available as RS1001 DIN, 300 bar / 4350 psi) |
| HP Ports | 2 |
| LP Ports | 4 (2 standard, 2 high-flow) |
| High-flow Airflow Increase | Approximately 15% |
| Second Stage Case | Lightweight composite construction |
| Second Stage Orientation | Ambidextrous (left or right hand) |
| Venturi | Adjustment lever |
| Mouthpiece | Ortho-conscious design |
| Cold Water Feature | Cold water insulation system with environmentally sealed design |
⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
How often does a scuba regulator need servicing?
Follow the interval in your regulator's manual, since manufacturers commonly specify an annual inspection or a set number of dives and many warranties depend on it. A regulator is life-support equipment, so service belongs with a factory-trained technician rather than being attempted at home. Have it looked at sooner than scheduled if you notice increased breathing effort, free-flow, bubbles, or water in the second stage.
How do I rinse and care for a regulator after diving?
Make sure the dust cap is dry and firmly seated over the first-stage inlet before the regulator goes anywhere near water, because water inside the first stage is the leading cause of internal corrosion. Rinse in fresh water without pressing the purge button, since purging while depressurized can draw water back into the second stage. Shake out the water and hang it to dry with the hoses in wide, gentle loops rather than tight bends.
Can I fly with a scuba regulator?
Regulators travel well and are usually best carried in hand luggage where they will not be crushed or lost. A regulator holds no gas of its own, so there is nothing inherently problematic about it on an aircraft, though the airline and security screeners always have the final say. Pack it dry with the dust cap in place, in a padded regulator bag or wrapped in soft gear.
Can I use my regulator with nitrox?
Many modern regulators are supplied as suitable for nitrox mixes up to 40 percent oxygen, which is the widely used recreational industry standard, while anything above that requires dedicated oxygen-clean equipment and procedures. Confirm what your specific regulator's manual states, and follow your nitrox training and your fill station's requirements. Never assume a regulator is oxygen-service clean simply because it looks clean or is new.
What is the difference between DIN and yoke regulators?
A yoke (A-clamp) fitting clamps over the tank valve and is the most common connection across much of the recreational world, while a DIN fitting screws into the valve and is standard in much of Europe and in technical diving. DIN captures the o-ring inside the threads, which many divers consider more secure, but yoke is often what rental cylinders provide. Adapters exist in both directions, so check what is used where you dive before deciding.
What is the octopus regulator for?
The octopus is your backup second stage, carried so you can share air with a buddy who is out of gas, or breathe from it yourself if your primary fails or free-flows. It is normally on a longer, brightly colored hose so it is easy to find and hand over under stress. Secure it in the triangle between your chin and the bottom of your rib cage so it is instantly accessible and not dragging through sand or coral.
How should I store a regulator between dive trips?
Store it fully dry, out of sunlight, with the dust cap in place and the hoses in wide loops rather than tightly coiled. Avoid hanging it by the second stages for long periods, which stresses the hose fittings; laying it flat in a padded bag or hanging it by the first stage is kinder. If it has sat unused for a long stretch, have it checked before your next trip rather than assuming it is ready to dive.
What is included in the TUSA RS1001 regulator set?
The RS1001 set includes the R1000 first stage and the S0001 second stage as a matched pair. It is offered with either a Yoke connection or, as the RS1001 DIN, a DIN connection rated to 300 bar/4350 psi.
Is the TUSA RS1001 available in a DIN version?
Yes. The RS1001 DIN version is rated to 300 bar/4350 psi, in addition to the standard Yoke-connection RS1001. Choose the connection that matches your tank valve.
Can the TUSA RS1001 second stage be set up for either hand?
Yes. The S0001 second stage has an ambidextrous design, so the hose can be configured for either left- or right-hand breathing preference.
How does the RS1001 protect against salt, sand, and pool chemicals?
The RS1001 uses an environmentally sealed design that protects internal components from salt, sand, chlorine, and pool chemicals, paired with a cold water insulation system to help maintain performance in cooler water.












