Scubapro MK25 EVO/G260 Dive Regulator System INT + ScubaPro Sport Bag 125 Roller
Scubapro MK25 EVO/G260 Dive Regulator System INT + ScubaPro Sport Bag 125 Roller is backordered and will ship as soon as it is back in stock.
What's in this bundle
Scubapro MK25 EVO/G260 Dive Regulator System INT + ScubaPro Sport Bag 125 Roller is backordered and will ship as soon as it is back in stock.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Product Information
The Scubapro MK25 EVO/G260 Dive Regulator System INT is a piston first stage paired with a G260 second stage, built around an air-balanced flow-through design in chrome-plated brass with an INT (Yoke) connection, XTIS cold-water protection, and nitrox compatibility up to 40 percent. This listing includes a ScubaPro Sport Bag 125 Roller for transport and storage.
Who it is for
This system is built for divers who use a standard INT (Yoke) tank valve and want a regulator with cold-water protection and a reversible second-stage hose attachment for left or right hose positioning in technical configurations. It integrates into existing scuba rigs through its INT connection and supports both recreational and technical dive profiles.
Key details
- First stage: air-balanced flow-through piston design in chrome-plated brass with XTIS (Extended Thermal Insulating System) cold-water protection and anti-freeze protection
- Port configuration: 2 opposing high-pressure ports and 5 low-pressure ports (swivel turret with 4 high-flow ports and 1 super high-flow axial port)
- Second stage: G260 with metal valve housing, anodized aluminum front cover, and reinforced technopolymer casing
- G260 controls: adjustable inhalation-effort knob and VIVA (Venturi-Initiated Vacuum Assist) lever
- Nitrox compatible up to 40 percent oxygen
- Dimensions: 9.06 in x 7.09 in x 3.15 in; regulator weight: 2.8 lb
- Backed by a limited lifetime warranty
Compatibility and sizing
This item is the INT (Yoke) configuration, item number 12.252.010. An MK25 EVO DIN 300/G260 version is also published separately by Scubapro for divers who need a DIN connection instead of INT.
What's in the box
- MK25 EVO/G260 regulator (first and second stage)
- 4mm Allen key (43.021.000)
- Manual (45.101.180)
- ScubaPro Sport Bag 125 Roller
DiveCatalog.com is an authorized Scubapro dealer and a dive shop in Irvine, California, operating since 2003. Call or chat with us at 888-701-4017 if you have questions about INT versus DIN fit or compatibility with your current gear.
- Air-balanced flow-through piston first stage provides constant airflow unaffected by depth, tank pressure, or breathing rate.
- XTIS cold-water protection isolates internal mechanical components of the first stage, with anti-freeze protection included.
- Chrome-plated brass first stage with 2 opposing high-pressure ports and 5 low-pressure ports (4 high-flow plus 1 super high-flow axial port) on a swivel turret.
- G260 second stage features a metal valve housing, anodized aluminum front cover, and reinforced technopolymer casing.
- Adjustable inhalation-effort knob and VIVA lever on the G260 second stage.
- Reversible hose attachment on the second stage allows left or right hose positioning for technical diving setups.
- INT (Yoke) connection for compatibility with standard scuba tank valves.
- Nitrox compatible up to 40 percent oxygen.
- Limited lifetime warranty on the regulator.
- Includes ScubaPro Sport Bag 125 Roller, made of 600 denier polyester with PU coating, with saltwater-resistant wheels and a backpack strap system with storage pocket.
- Sport Bag 125 interior has two zippered side pockets and a U-shaped opening with a YKK double-slider main zipper.
| Item Number (Regulator) | 12.252.010 |
| UPC (Regulator) | 4048336290739 |
| Connector Type | INT (Yoke) |
| First Stage Type | Piston, air-balanced flow-through |
| First Stage Material | Chrome-plated brass |
| HP Ports | 2 (opposing configuration) |
| LP Ports | 5 (swivel turret: 4 high-flow plus 1 super high-flow axial port) |
| Second Stage Series | G260 (G Series) |
| Second Stage Material | Anodized aluminum front cover, metal components, reinforced technopolymer casing |
| Valve Housing | Metal |
| Nitrox Mix | Up to 40% |
| Product Length | 9.06 in |
| Product Width | 7.09 in |
| Product Height | 3.15 in |
| Weight (Regulator) | 2.8 lb |
| Warranty | Limited lifetime warranty |
| Item Number (Sport Bag 125) | 53.123.260 |
| Sport Bag 125 Material | 600 Denier Polyester with PU coating |
| Sport Bag 125 Dimensions | 31.5 in x 17.72 in x 12.99 in |
| Sport Bag 125 Weight | 5.723 lb |
| Sport Bag 125 Volume | 33.02 gal (125 L) |
| Sport Bag 125 Weight Capacity | 61.73 lb |
- MK25 EVO/G260 regulator (first and second stage)
- 4mm Allen key (43.021.000)
- Manual (45.101.180)
- ScubaPro Sport Bag 125 Roller
Frequently Asked Questions
How often does a scuba regulator need servicing?
Follow the interval in your regulator's manual, since manufacturers commonly specify an annual inspection or a set number of dives and many warranties depend on it. A regulator is life-support equipment, so service belongs with a factory-trained technician rather than being attempted at home. Have it looked at sooner than scheduled if you notice increased breathing effort, free-flow, bubbles, or water in the second stage.
How do I rinse and care for a regulator after diving?
Make sure the dust cap is dry and firmly seated over the first-stage inlet before the regulator goes anywhere near water, because water inside the first stage is the leading cause of internal corrosion. Rinse in fresh water without pressing the purge button, since purging while depressurized can draw water back into the second stage. Shake out the water and hang it to dry with the hoses in wide, gentle loops rather than tight bends.
Can I fly with a scuba regulator?
Regulators travel well and are usually best carried in hand luggage where they will not be crushed or lost. A regulator holds no gas of its own, so there is nothing inherently problematic about it on an aircraft, though the airline and security screeners always have the final say. Pack it dry with the dust cap in place, in a padded regulator bag or wrapped in soft gear.
Can I use my regulator with nitrox?
Many modern regulators are supplied as suitable for nitrox mixes up to 40 percent oxygen, which is the widely used recreational industry standard, while anything above that requires dedicated oxygen-clean equipment and procedures. Confirm what your specific regulator's manual states, and follow your nitrox training and your fill station's requirements. Never assume a regulator is oxygen-service clean simply because it looks clean or is new.
What is the difference between DIN and yoke regulators?
A yoke (A-clamp) fitting clamps over the tank valve and is the most common connection across much of the recreational world, while a DIN fitting screws into the valve and is standard in much of Europe and in technical diving. DIN captures the o-ring inside the threads, which many divers consider more secure, but yoke is often what rental cylinders provide. Adapters exist in both directions, so check what is used where you dive before deciding.
What is the octopus regulator for?
The octopus is your backup second stage, carried so you can share air with a buddy who is out of gas, or breathe from it yourself if your primary fails or free-flows. It is normally on a longer, brightly colored hose so it is easy to find and hand over under stress. Secure it in the triangle between your chin and the bottom of your rib cage so it is instantly accessible and not dragging through sand or coral.
How should I store a regulator between dive trips?
Store it fully dry, out of sunlight, with the dust cap in place and the hoses in wide loops rather than tightly coiled. Avoid hanging it by the second stages for long periods, which stresses the hose fittings; laying it flat in a padded bag or hanging it by the first stage is kinder. If it has sat unused for a long stretch, have it checked before your next trip rather than assuming it is ready to dive.
Does the Scubapro MK25 EVO/G260 come in a DIN connection?
This specific listing is the INT (Yoke) configuration, item number 12.252.010. Scubapro also publishes an MK25 EVO DIN 300/G260 version as a separate item for divers who need a DIN connection instead of INT. Check your tank valve type before ordering, since this listing covers only the INT (Yoke) configuration.
What is included with this MK25 EVO/G260 INT regulator system?
The box includes the MK25 EVO/G260 regulator with first and second stage, a 4mm Allen key, and the owner's manual. This listing also includes a ScubaPro Sport Bag 125 Roller for transport and storage.
What does XTIS cold-water protection do on the MK25 EVO first stage?
XTIS (Extended Thermal Insulating System) isolates the internal mechanical components of the first stage, and the first stage also includes anti-freeze protection. These features are built into the MK25 EVO first stage design as published by Scubapro.
What are the dimensions and capacity of the included Sport Bag 125?
The ScubaPro Sport Bag 125 measures 31.5 in x 17.72 in x 12.99 in, weighs 5.723 lb, and holds 33.02 gallons (125 liters) with a weight capacity of 61.73 lb. It has saltwater-resistant wheels, a backpack strap system, and two interior zippered side pockets.


















