Free Shipping on Most Orders Over $50 | Get up to 10% cashback | Need It Today? Same-Day Delivery Within 50 Miles

Tusa Tina Diving Package

Tusa  |  SKU: GE-0403-1101-XS
Refer & Earn

Regular price $1,399.95
Shipping calculated at checkout.

In stock — ships from Irvine, CA


Configuration
Size

Pickup available at In Store

Usually ready in 2 hours


Pick accessories — 90% off with your $1000+ order

and your picks are free.

 

Start  $501 pick $1252 picks
  • DiveCatalog.com Silicone Frameless Dive Mask

    $59.95$6.00

    1
  • DiveCatalog.com Retro Oval Dive Mask Without Nose Pocket Compensator

    $44.95$4.50

    1
  • DiveCatalog.com Classic Oval Dive Mask Silicone

    $44.95$4.50

    1
  • DiveCatalog.com Metal Coil Lanyard with Snap Clips

    $39.95$4.00

    1
  • DiveCatalog.com Junior Rubber Oval Dive Mask (15% smaller)

    $34.95$3.50

    1


Payment & Security

Payment methods

  • Amazon
  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Product Information

The Tusa Tina Diving Package bundles TUSA's Tina BCD (BC0403B), the TC1 wrist dive computer (IQ1301), the RS1001 regulator set, the Safe Second SS0001 octopus, and a two-gauge console into one setup for recreational scuba diving. The Tina BCD uses a high-cut waist profile designed for women, the TC1 runs the Buhlmann ZHL-16C algorithm on a rechargeable lithium-ion battery, and the RS1001 first stage is rated for cold water use below 50°F/10°C.

Who it is for

This package is built for women divers who want a complete recreational scuba setup in one purchase. The Tina BCD's high-cut waist is designed to reduce discomfort from lead weighting, and its A.W.L.S. III weight system, Independent Harness System (I.H.S.), Ultimate Stabilizing Harness (U.S.H.), and Waist Support System (W.S.S.) work together for buoyancy control. This package is intended for recreational scuba diving.

Key details

  • Tina BCD: 500D CORDURA exterior, 420D nylon interior, 3 dump valves (O.P.E.V. plus 2), 2 stainless and 4 resin D-rings, and lift capacity ranging from 24.7 lbf (XS) to 36.0 lbf (M/L)
  • TC1 computer: rechargeable LI-ION battery, Buhlmann ZHL-16C algorithm, and Scuba, Plan, Free diving, and Gauge modes with audio, visual, and vibration alarms and an adjustable backlight
  • RS1001 regulator: R1000 balanced diaphragm first stage with 2 HP and 4 LP ports (2 standard, 2 high-flow, approximately 15% higher flow), an environmentally sealed and cold-water-insulated design, and an S0001 second stage with a venturi adjustment lever and ortho-conscious mouthpiece
  • SS0001 octopus: lightweight composite case, left or right-hand configuration, classic downstream valve with purge button, and reversible hose attachment
  • Two-gauge console (SCA-270): pressure gauge rated to 5000 psi/400 bar (4350 psi/300 bar max), compass, luminescent dial, and dimensions of 6.9 in x 2.8 in (175 mm x 70 mm)

Compatibility and sizing

The Tina BCD is available in XS, S, M, and L. The Tina BCD is also compatible with TUSA's Duo Air II integrated second stage regulator and power inflator. The RS1001 regulator is also available in a DIN version (RS1001 DIN) rated to 300 bar/4350 psi for divers who prefer a DIN first stage over Yoke.

What's in the box

  • Tina BCD (BC0403B)
  • TC1 wrist dive computer (IQ1301)
  • RS1001 regulator set (R1000 first stage and S0001 second stage)
  • Safe Second SS0001 octopus
  • Two-gauge console (SCA-270) with pressure gauge and compass
  • Roller Mesh Bag (BA0301)

DiveCatalog.com is an authorized TUSA dealer and a dive shop in Irvine, California since 2003. Call or chat with us if you have questions about sizing or how the Tina BCD, TC1 computer, or RS1001 regulator fit your setup.

⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

Frequently Asked Questions

How should a scuba BCD fit?

A BCD should fit snugly enough that it does not ride up toward your ears when inflated, while still letting you breathe fully. Fasten the waist and cummerbund first, then adjust the shoulder straps so the tank sits close to your back and the shoulders cannot slide off. With the BCD fully inflated at the surface you should still be able to take a deep, comfortable breath; if it squeezes your chest, loosen it or move up a size.

How do I rinse and care for a BCD after diving?

Rinse the outside in fresh water and also flush the inside of the bladder, because salt water gets in through the inflator and dump valves. Fill the bladder roughly a third full of fresh water through the oral inflator, slosh it around, then drain it out through the inflator and each dump valve. Hang it to dry out of direct sunlight and store it partially inflated so the bladder walls do not stick together.

Should I use integrated weights or a weight belt?

Integrated weight pockets carry the lead in the BCD itself, which many divers find more comfortable and easier on the hips, while a weight belt keeps the weight independent of your BCD. Either way, you must be able to release your ditchable weight quickly with one hand, and your buddy should know how your system releases. Non-ditchable trim pockets are useful for balance but should never hold weight you might need to drop.

How do I pack a BCD for travel?

Make sure the BCD is completely dry inside and out before packing so it does not mildew in transit. Remove all weights, deflate it fully, and fold or roll it around softer items such as a wetsuit to cushion the inflator and valves. Avoid hard creases in the air cell, and unpack and air it out as soon as you arrive.

When does a BCD need to be serviced?

Follow the service interval in the manufacturer's manual, which is commonly an annual inspection alongside the rest of your life-support gear. Have the inflator, dump valves, and bladder checked any time the inflator sticks, free-flows, feels rough, or the BCD holds air poorly. Between services, confirm that it inflates and deflates properly as part of every pre-dive check.

What is the difference between a jacket-style and a back-inflate BCD?

A jacket-style BCD holds air in panels that wrap around your sides as well as your back, while a back-inflate BCD keeps the entire air cell behind you. Jacket styles tend to feel very stable and upright at the surface, and back-inflate styles keep the chest clear and are often preferred for horizontal trim underwater. Neither is objectively better, so treat it as a fit and preference decision and try both if you can.

Will my BCD fit any scuba tank?

Most recreational BCDs use an adjustable cam band sized for common single-cylinder diameters, so standard aluminum and steel tanks generally work. Re-check the band tension after the first wetting, because webbing can relax slightly and let the tank shift. If you dive doubles or unusual cylinder diameters, confirm compatibility with the manufacturer before assuming it will hold.

What is included in the Tusa Tina Diving Package?

The package includes the Tina BCD (BC0403B), the TC1 wrist dive computer (IQ1301), the RS1001 regulator set with R1000 first stage and S0001 second stage, the Safe Second SS0001 octopus, a two-gauge console (SCA-270) with pressure gauge and compass, and a Roller Mesh Bag (BA0301).

Is the RS1001 regulator available in DIN or Yoke?

The RS1001 included in this package is a Yoke-configured regulator set, and TUSA also offers an RS1001 DIN version rated to 300 bar/4350 psi for divers who need a DIN first stage. Check which configuration you need before ordering, since the two are not interchangeable without a different first stage.

Does the TC1 dive computer use a replaceable battery?

No, the TC1 (IQ1301) uses a rechargeable LI-ION battery rather than a user-replaceable coin cell. It runs the Buhlmann ZHL-16C algorithm and supports Scuba, Plan, Free diving, and Gauge modes with audio, visual, and vibration alarms.

What sizes does the Tina BCD come in and how does lift capacity change?

The Tina BCD in this package is available in XS, S, M, and L. Lift capacity scales with size, ranging from 24.7 lbf in XS up to 36.0 lbf in M and L, so choosing a size that fits your torso also determines how much lift the BCD provides.