SEAC OCTOPUS IT300
In stock — ships from Irvine, CA
This item is currently on backorder. Order now to reserve yours, and we will ship it as soon as it is back in stock.
SEAC OCTOPUS IT300 is backordered and will ship as soon as it is back in stock.
Pickup available at In Store
Usually ready in 2 hours
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Save with a package
Ready-made packages that include this item
Save $124.81 (22% off)
Product Information
The SEAC OCTO IT300 is an emergency second stage (octopus) built as the backup breathing source for the SEAC IT300 first stage, fitted with a 1-meter braided hose, an adjustable Venturi effect controlled by a Dive/Pre Dive switch, and an oversized soft-PU purge button. It is CE EN 250-2014 certified and all components are made in Italy.
Who it is for
This octopus suits divers running a SEAC IT300 first stage who need a dedicated emergency second stage to share air or breathe from if the primary regulator fails or free-flows. The oversized purge button is sized for use with thick gloves, so it stays easy to operate when hand dexterity is reduced.
Key details
- Hose: 1 meter long with braided reinforcement for durability and flexibility.
- Venturi effect: adjustable via a simple Dive/Pre Dive switch.
- Purge button: oversized, soft 2-material PU with an integrated SEAC logo, built into the front shield and sized for thick gloves.
- Exhaust duct: an exclusive geometry that helps prevent water infiltration into the second stage during strong lateral currents and directs exhaled bubbles away from the diver's field of vision.
- Hose guard: a 2-material design shaped to resist kinking and form an ergonomic curve.
- Certification: CE EN 250-2014.
- Origin: all components made in Italy.
Compatibility and sizing
The OCTO IT300 is designed as the octopus companion to the SEAC IT300 first stage, and the two are also sold together as the SET IT300.
DiveCatalog.com is an authorized SEAC dealer and a dive shop in Irvine, California, serving divers since 2003. Call or chat with us if you have questions about fit or compatibility with your current regulator setup.
- 1-meter braided hose provides durability and flexibility for reliable airflow.
- Adjustable Venturi effect switches between Dive and Pre Dive modes with a simple control.
- Oversized soft-PU purge button is built into the front shield with an integrated SEAC logo and sized for use with thick gloves.
- Exclusive exhaust duct geometry helps prevent water infiltration into the second stage during strong lateral currents and directs exhaled bubbles away from the diver's field of vision.
- 2-material hose guard is shaped to prevent kinking and create an ergonomic curve.
- CE EN 250-2014 certified for compliance with the EU standard for scuba regulators.
- Made in Italy components throughout.
- Designed as the SEAC IT300 octopus companion, also offered together as the SET IT300.
| Product type | Octopus (emergency second stage) |
| Hose length | 1 meter |
| Hose type | Braided reinforcement |
| Venturi effect | Adjustable, Dive/Pre Dive switch |
| Purge button material | Soft 2-material PU with integrated SEAC logo |
| Hose guard | 2-material design, kink-resistant, ergonomic curve |
| Exhaust duct design | Exclusive geometry, resists water infiltration during lateral currents, directs bubbles away from field of vision |
| Certification | CE EN 250-2014 |
| Country of origin | Italy |
| Compatibility | SEAC IT300 first stage (also sold together as SET IT300) |
⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
How often does a scuba regulator need servicing?
Follow the interval in your regulator's manual, since manufacturers commonly specify an annual inspection or a set number of dives and many warranties depend on it. A regulator is life-support equipment, so service belongs with a factory-trained technician rather than being attempted at home. Have it looked at sooner than scheduled if you notice increased breathing effort, free-flow, bubbles, or water in the second stage.
How do I rinse and care for a regulator after diving?
Make sure the dust cap is dry and firmly seated over the first-stage inlet before the regulator goes anywhere near water, because water inside the first stage is the leading cause of internal corrosion. Rinse in fresh water without pressing the purge button, since purging while depressurized can draw water back into the second stage. Shake out the water and hang it to dry with the hoses in wide, gentle loops rather than tight bends.
Can I fly with a scuba regulator?
Regulators travel well and are usually best carried in hand luggage where they will not be crushed or lost. A regulator holds no gas of its own, so there is nothing inherently problematic about it on an aircraft, though the airline and security screeners always have the final say. Pack it dry with the dust cap in place, in a padded regulator bag or wrapped in soft gear.
Can I use my regulator with nitrox?
Many modern regulators are supplied as suitable for nitrox mixes up to 40 percent oxygen, which is the widely used recreational industry standard, while anything above that requires dedicated oxygen-clean equipment and procedures. Confirm what your specific regulator's manual states, and follow your nitrox training and your fill station's requirements. Never assume a regulator is oxygen-service clean simply because it looks clean or is new.
What is the difference between DIN and yoke regulators?
A yoke (A-clamp) fitting clamps over the tank valve and is the most common connection across much of the recreational world, while a DIN fitting screws into the valve and is standard in much of Europe and in technical diving. DIN captures the o-ring inside the threads, which many divers consider more secure, but yoke is often what rental cylinders provide. Adapters exist in both directions, so check what is used where you dive before deciding.
What is the octopus regulator for?
The octopus is your backup second stage, carried so you can share air with a buddy who is out of gas, or breathe from it yourself if your primary fails or free-flows. It is normally on a longer, brightly colored hose so it is easy to find and hand over under stress. Secure it in the triangle between your chin and the bottom of your rib cage so it is instantly accessible and not dragging through sand or coral.
How should I store a regulator between dive trips?
Store it fully dry, out of sunlight, with the dust cap in place and the hoses in wide loops rather than tightly coiled. Avoid hanging it by the second stages for long periods, which stresses the hose fittings; laying it flat in a padded bag or hanging it by the first stage is kinder. If it has sat unused for a long stretch, have it checked before your next trip rather than assuming it is ready to dive.
Is the SEAC OCTO IT300 compatible with the SEAC IT300 first stage?
Yes. The OCTO IT300 is designed as the octopus companion to the SEAC IT300 first stage, and the two are also sold together as the SET IT300. If you are pairing it with a different first stage, call or chat with us to confirm fit before you buy.
What makes the purge button on the OCTO IT300 different from a standard octopus?
It uses an oversized soft 2-material PU purge button with an integrated SEAC logo, built into the front shield. The larger size is intended to make it easy to press even when wearing thick gloves.
Does the OCTO IT300 have a Venturi effect switch?
Yes. The OCTO IT300 has an adjustable Venturi effect controlled by a simple Dive/Pre Dive switch, letting you change the airflow setting between the two modes.
How does the OCTO IT300 handle strong currents?
It uses an exclusive exhaust duct geometry that helps prevent water from infiltrating the second stage during strong lateral currents, while also directing exhaled bubbles away from the diver's field of vision.

















