BigBlue 450 Lumen Mini Dive Light w/ Glove & Batteries and Tail Switch
BigBlue 450 Lumen Mini Dive Light w/ Glove & Batteries and Tail Switch is backordered and will ship as soon as it is back in stock.
Pickup currently unavailable at In Store
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Product Information
The BigBlue 450 Lumen Mini Dive Light is a Cree LED dive light with an 8 degree narrow beam angle, a push-button tail switch, and a 100 meter depth rating, built to serve as either a primary or backup light. This package bundles the light with a neoprene glove.
Who it is for
This light suits divers who want a compact, dependable backup light, and it can also serve as a primary light. The narrow 8 degree beam concentrates the 450 lumen output for precise illumination, and the design is also adaptable to outdoor uses like hiking and camping.
Key details
- Light output: 450 lumens from a Cree LED.
- Beam angle: 8 degrees, narrow and focused.
- Burn time: up to 4 hours.
- Power source: 3x AAA batteries.
- Depth rating: 100 meters.
- Housing: anodized aluminum alloy, 33mm diameter by 121.7mm length, weighing 1 lb.
- Control: push-button tail switch.
What's in the box
- Light unit
- Neoprene glove
- Lanyard
- 3 AAA batteries
- 2 spare O-rings
- 1-year manufacturer warranty documentation
DiveCatalog.com is an authorized BigBlue dealer and a dive shop in Irvine, California since 2003. Call or chat with us if you have questions about fit, battery setup, or how this light compares to other packages.
- 450 lumens: Cree LED output rated at 450 lumens.
- 8 degree beam angle: Narrow beam for focused, concentrated illumination.
- Push-button tail switch: Simple on/off operation at the tail cap.
- Primary or backup use: Can serve as either a primary or backup dive light.
- Up to 4 hours burn time: Runs on 3x AAA batteries.
- 100 meter depth rating: Rated for use to 100 meters.
- Anodized aluminum alloy housing: Measures 33mm diameter by 121.7mm length and weighs 1 lb.
- Adaptable use: Suited to underwater activities as well as outdoor use like hiking and camping.
- Includes neoprene glove: This package bundles the light with a neoprene glove.
| Lumens | 450 |
| Beam Angle | 8 degrees |
| Burn Time | Up to 4 hours |
| Light Source | Cree LED |
| Power Source | 3x AAA batteries |
| Maximum Depth | 100 meters |
| Dimensions | 33mm diameter x 121.7mm length |
| Weight | 1 lb |
| Housing Material | Anodized aluminum alloy |
| Switch Type | Push-button tail switch |
| Warranty | 1-year manufacturer warranty |
- Light unit
- Neoprene glove
- Lanyard
- 3 AAA batteries
- 2 spare O-rings
- 1-year manufacturer warranty documentation
⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
What do lumens mean on a dive light?
Lumens measure the total light output, but they say nothing about how that light is shaped, so a tight narrow beam can look far brighter at distance than a higher-lumen wide beam. Beam angle, color temperature, and water clarity affect what you actually see as much as the lumen figure does. Use lumens to compare lights of a similar beam type rather than as a single score of quality.
What is the difference between a primary and a backup dive light?
A primary light is your main light, usually brighter, larger, and with a longer burn time, while a backup is a small, simple light carried in case the primary fails. Any dive where you need a light to exit safely, such as a night dive, calls for carrying at least one backup. Backups are chosen for reliability and simplicity rather than for maximum output.
How long will a dive light run on one charge?
Burn time and brightness trade directly against each other, so the same battery run at a lower power setting lasts substantially longer. Manufacturers usually quote burn time at each power level, and many lights automatically step down output as the battery drains or the head heats up. Treat quoted figures as fresh-battery, ideal-condition numbers and plan for more burn time than your dive actually needs.
How do I care for the o-rings on a dive light?
The o-rings sealing the battery compartment are what keep the light from flooding, so inspect them for grit, hair, and nicks every time you open it, and wipe the sealing surfaces clean. Lubricate lightly with the grease type the manufacturer specifies, using a thin film rather than a heavy coat, because excess grease attracts sand. Replace o-rings when they look flattened, cracked, or dry, and do not over-tighten the cap in the hope of sealing a bad o-ring.
Can I fly with dive light batteries?
Lithium batteries are subject to airline and regulatory limits that vary by cell chemistry, watt-hour rating, and whether the cells are installed or loose. As a general rule lithium cells travel in carry-on baggage rather than checked baggage, with terminals protected against short circuit, but you must confirm your airline's current policy and any local rules before you fly. Carrying the manufacturer's battery specification sheet helps if you are questioned at screening.
How should I store and maintain a dive light between trips?
Rinse it in fresh water after each dive day and work the switch while it is submerged so salt does not crystallize inside it, then dry it before opening. For storage, remove or charge the batteries as the manual directs, and leave the cap loose so the o-ring does not take a permanent set. Never store a light with corroded or leaking cells inside it.
Should I turn a dive light on before I get in the water?
Test it briefly as part of your pre-dive check, but do not leave a powerful light running in air, because many are designed to shed heat into the water and can overheat on the surface. Check the manual, as some lights have thermal protection that dims or shuts them down when they are dry. Testing before you gear up is far better than discovering a dead light at depth.
Is the BigBlue 450 Lumen Mini Dive Light good for backup use?
Yes, the manufacturer describes it as suitable for use as either a primary or backup dive light. Its compact anodized aluminum housing measures 33mm diameter by 121.7mm length and weighs 1 lb, and it runs on 3x AAA batteries for up to 4 hours, making it easy to carry as a secondary light.
What batteries does the BigBlue 450 Lumen Mini Dive Light use?
It runs on 3x AAA batteries, which are included with the light. Manufacturer specifications list a burn time of up to 4 hours on these batteries, powering the 450 lumen Cree LED through the push-button tail switch.
What depth is the BigBlue 450 Lumen Mini Dive Light rated for?
The light carries a maximum depth rating of 100 meters per the manufacturer specifications. Its housing is anodized aluminum alloy, sealed with O-rings, two spare O-rings are included in the box for maintenance.
Does this package include a glove?
Yes, this specific package bundles the BigBlue 450 Lumen Mini Dive Light with a neoprene glove, in addition to the light unit, lanyard, 3 AAA batteries, 2 spare O-rings, and 1-year manufacturer warranty documentation.














