Scubapro Profile Steamer 0.5mm Womens Full Scuba Diving Wetsuit

Scubapro | SKU: 63.447.100

(42)

Refer & Earn

Learn more about Scubapro Free Parts for Life Program

Sold out

$149.00

Shipping calculated at checkout.

Size

Not sure of your size? Matched to Scubapro’s size chart

Scubapro women’s wetsuit sizing. Imperial in bold, metric underneath.

Height and weight

Size	Height ft/in · cm	Weight lb · kg
2XS - 0	4′11″–5′1″ 150–155	93–118 42–54
XS - 2	5′1″–5′3″ 155–160	106–131 47–59
S - 4	5′3″–5′5″ 160–165	115–140 52–64
ST - 4T	5′5″–5′7″ 165–170	115–140 52–64
MS - 6S	5′3″–5′5″ 160–165	126–151 57–69
M - 6	5′5″–5′7″ 165–170	126–151 57–69
MT - 6T	5′7″–5′9″ 170–175	126–151 57–69
LS - 8S	5′5″–5′7″ 165–170	137–162 62–74
L - 8	5′7″–5′9″ 170–175	137–162 62–74
LT - 8T	5′9″–5′11″ 175–180	137–162 62–74
XLS - 10S	5′7″–5′9″ 170–175	148–173 67–79
XL - 10	5′9″–5′11″ 175–180	148–173 67–79
XLT - 10L	5′11″–6′1″ 180–185	148–173 67–79
2XLS - 12S	5′9″–5′11″ 175–180	159–184 72–84
2XL - 12	5′11″–6′1″ 180–185	159–184 72–84
3XL - 14	>6′1″ >185	>181 >82
4XL - 16	>6′1″ >185	>181 >82

Chest, waist and hips

Size	Chest in · cm	Waist in · cm	Hips in · cm
2XS - 0	31–33 79–84	25–27 64–69	31–33 79–84
XS - 2	32–34 81–86	27–30 69–76	34–36 86–91
S - 4	34–36 86–91	28–30 71–76	35–37 89–94
ST - 4T	34–36 86–91	28–30 71–76	35–37 89–94
MS - 6S	35–37 89–94	30–32 76–81	37–39 94–99
M - 6	35–37 89–94	30–32 76–81	37–39 94–99
MT - 6T	35–37 89–94	30–32 76–81	37–39 94–99
LS - 8S	37–39 94–99	32–34 81–86	38–40 96–101
L - 8	37–39 94–99	32–34 81–86	38–40 96–101
LT - 8T	37–39 94–99	32–34 81–86	38–40 96–101
XLS - 10S	38–40 96–101	33–35 84–89	40–42 101–107
XL - 10	38–40 96–101	33–35 84–89	40–42 101–107
XLT - 10L	38–40 96–101	33–35 84–89	40–42 101–107
2XLS - 12S	40–42 101–107	35–37 89–94	42–44 107–112
2XL - 12	40–42 101–107	35–37 89–94	42–44 107–112
3XL - 14	42–44 107–112	37–39 94–99	43–45 109–114
4XL - 16	43–45 109–114	38–40 96–101	45–47 114–119

How Scubapro measures

If you plan to wear a swimsuit or other items under your divewear, you should measure yourself while wearing those garments, keeping the tape measure parallel to the floor.

Chest: Measure around the fullest part of your chest.
Waist: Measure at the narrowest point of your waist.
Hips: Stand with your heels together and measure around the fullest part of your hips.

Source: Scubapro’s size chart (original chart).

Pick accessories — 90% off with your $50+ order

Your order unlocks accessories at 90% off.

Start $501 pick $1252 picks

DiveCatalog DIN Cap for 1st Stage (Female) for Scuba Diving Tanks - Scuba Essentials
$19.95$2.00

1
DiveCatalog Hose Clamp for Scuba Diving - Scuba Essentials
$17.95$1.80

1
DiveCatalog Neoprene Mask Strap Cover
$17.00$1.70

1
DiveCatalog Silicone Mouthpiece Replacement w/ installation - Scuba Essentials
$14.95$1.50

1
DiveCatalog Rubber Tank Valve Protector for Scuba Diving Tanks - Scuba Essentials
$11.95$1.20

1

90% off applies automatically at checkout on orders of $50+. Not combinable with discount codes.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Save with Open Box or Used Purchase

Used Scubapro Profile Steamer 0.5 mm Women's

Sale priceFrom $95.95 Regular price $149.00

Product Information

The Scubapro Profile Steamer 0.5mm Women's is an ultra-thin, one-piece neoprene wetsuit built for warm-water diving or as a low-bulk base layer beneath a thicker suit in colder conditions. It is made from 100% N2 0.5mm eco-friendly X-Foam neoprene with a Silverskin interior lining and a durable nylon/neoprene blend exterior, and it ships in sizes XS through 3XL.

Who it is for

This steamer suits divers, snorkelers, and travelers who want an ultra-thin standalone layer for warm water or who dive colder sites and need a slick, non-bulky under-layer that lets a thicker wetsuit go on and off easily. Its low profile and flexible panels also make it a good choice for anyone who wants a comfortable, chafe-free skin against bare skin in recreational diving or snorkeling.

Key details

Thickness: 0.5mm, 100% N2 neoprene made from eco-friendly, petroleum-free X-Foam that meets PAH testing requirements
Silverskin interior lining with a cell finish and Metalite coating for added warmth retention
Everflex flexible panels for a wide range of motion
Powertex anti-abrasion panels on the seat and shoulders and Tatex kneepads for durability in high-wear zones
Non-chafing flat-seam stitching, a high neck collar, thumb loops, and foot stirrups that keep the suit from riding up
Rear zipper for easier donning and doffing

Compatibility and sizing

Available in women's sizes XS, S, M, L, XL, 2XL, and 3XL, each with its own SKU and UPC. Because of the thin 0.5mm profile, this suit can be worn as a low-bulk base layer beneath a thicker wetsuit.

DiveCatalog.com is an authorized Scubapro dealer and has been a dive shop in Irvine, California since 2003. Call 888-701-4017 or chat with us if you have questions about sizing, fit, or layering this steamer under another wetsuit.

⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

Frequently Asked Questions

How should a wetsuit fit?

A wetsuit should feel snug everywhere, with no loose pockets at the lower back, armpits, or behind the knees where water can collect and flush. It will feel tighter than normal clothing on land, which is expected, because the suit works by holding a thin layer of water that your body warms. If you cannot take a full breath or the neck chokes you it is too small, and if you can pinch loose folds of neoprene it is too big.

What do you wear under a wetsuit?

Most divers wear a swimsuit, a rash guard, or a thin dive-specific base layer under a wetsuit. A slick base layer makes a tight suit much easier to pull on and cuts down chafing at the neck, shoulders, and underarms. Avoid thick cotton clothing, which soaks up water, bunches, and makes you colder rather than warmer.

How do you put on a tight wetsuit?

Work upward in small sections, pulling a little neoprene at a time rather than yanking on one spot, and get the suit fully seated at the ankles and knees before working on the hips and shoulders. A plastic bag over each foot and hand, or wetting the suit first, helps it slide into place. Grip with flat palms rather than fingertips, since fingernails are the most common cause of torn neoprene.

Does a thicker wetsuit mean a warmer wetsuit?

As a general rule, thicker neoprene insulates more, so a higher millimeter rating is warmer in the same conditions. Warmth also depends heavily on fit, suit style, seam construction, whether you add a hood, boots, and gloves, how long the dive is, and your own cold tolerance, so two divers in identical suits can feel very differently. Use thickness as a starting point and refine it against your local conditions and personal experience.

How do I care for and store a wetsuit?

Rinse it inside and out in fresh water after every dive day, and use a wetsuit-specific wash occasionally to control odor. Dry it inside-out first and then flip it, always out of direct sunlight, because UV and heat break down neoprene faster than anything else. Store it hanging on a wide-shouldered hanger or laid flat rather than folded, so you do not set permanent creases.

How long does a wetsuit last?

Lifespan depends far more on use and care than on age, so a suit dived hard in sun and chlorine may soften within a couple of seasons while a well-rinsed occasional-use suit can last many years. Signs a suit is finished include compressed neoprene that no longer feels buoyant or warm, splitting seams, and looseness in areas that used to be snug. Repairing small cuts and seam separations early adds meaningfully to a suit's life.

What is the difference between a full suit, a shorty, and wetsuit separates?

A full suit covers arms and legs, a shorty stops at the upper arms and thighs, and separates such as tops, bottoms, and hooded vests layer to add warmth where you want it. Layering a vest or top under a full suit adds core warmth and can extend the range of a suit you already own. Choose based on how much coverage you want, both for warmth and for protection against stings and abrasion.

What sizes does the Scubapro Profile Steamer 0.5mm Women's come in?

This wetsuit is available in women's sizes XS, S, M, L, XL, 2XL, and 3XL, each listed under its own SKU and UPC. Because it is designed to fit close to the skin as either a standalone warm-water suit or a base layer, choosing your usual snug-fitting wetsuit size is the right starting point.

Can this wetsuit be worn under another wetsuit?

Yes. The 0.5mm neoprene is intentionally thin so it can be worn as a low-bulk base layer beneath a thicker wetsuit in colder water. Thumb loops and foot stirrups help keep it from riding up while you pull a heavier suit on over it.

Is the Profile Steamer warm enough to dive on its own?

At 0.5mm, this steamer is built for warm-water diving, snorkeling, and travel rather than cold-water use on its own. For colder conditions, it performs best as a base layer under a thicker wetsuit rather than as standalone thermal protection.

What materials make up this wetsuit?

The suit uses 100% N2 0.5mm neoprene made from eco-friendly X-Foam, a Silverskin interior lining with a Metalite coating, Everflex flexible panels, Powertex anti-abrasion panels on the seat and shoulders, and Tatex kneepads, all wrapped in a nylon/neoprene blend exterior.

Review summary

4.1 42 ratings across the web

86%

(1178)

(114)

(37)

(16)

(31)

Great purchase and "Like New" as advertized.

Like dis

Like dis project

Excellent wetsuit but will it crush quickly like other wetsuits?

I purchased a BARE 5mm Reactive wetsuit (open box), which was like new, to replace my 1.5 yr old BARE 5mm Velocity wetsuit which had collapsed to only 2.5mm after 3 diving trips (~100 dives). The Reactive wetsuit is well constructed and very flexible. I had to increase the size of the Reactive suit, as it was smaller than the BARE Velocity suit of the same size. Tremendous customer service by Dive Catalog to exchange the wetsuit for proper size. I hope the Reactive suit does not crush so quickly like my other wetsuits (BARE, Henderson, Pinnacle). Hoping that the new technology in this suit will keep me warm below the thermocline.

Perfectly Built

Best of the many many diver hangers in my life. Easily supports my steel-plated BCD, while still donned with all of my accessories. No cracks, bends, or dents. Has even supported my BCD w/ a steel 100 tank attached (not recommended, for safety purposes, though).

Will continue to use this hanger for the long-term. No brainer.

Go-to Dive Hanger

This is a must-have for every diver. It's the quintessential hanger for all dive gear in one small package.

DiveCatalog's "Quick Dry Multi Accessory Dive Gear Hanger for Boots, Gloves, Hood" is set at a great price for a great product. Versatile enough that I've purchased extra hangers to organize my BMX racing gear.

Must-have for divers and anyone looking to organize their adventurous outdoor activities equipment.

Marketing Product Type	Steamers
Thickness	0.5mm
Materials	X-Foam Neoprene (eco-friendly, 100% N2)
Stitching	Flat-Seam
Gender	Women
Activity	Snorkeling, Travel, Recreational
Product Weight	1.4 lb
Sizes Available	XS, S, M, L, XL, 2XL, 3XL
UPC (XS)	4048336322607