Scubapro Hybrid 3mm Bolero Diving Jacket

Scubapro | SKU: 63.752.500

Refer & Earn

Learn more about Scubapro Free Parts for Life Program

Sold out

Sale

$139.99 $151.00

Shipping calculated at checkout.

Size

Not sure of your size? Matched to Scubapro’s size chart

Scubapro women’s wetsuit sizing. Imperial in bold, metric underneath.

Height and weight

Size	Height ft/in · cm	Weight lb · kg
2XS - 0	4′11″–5′1″ 150–155	93–118 42–54
XS - 2	5′1″–5′3″ 155–160	106–131 47–59
S - 4	5′3″–5′5″ 160–165	115–140 52–64
ST - 4T	5′5″–5′7″ 165–170	115–140 52–64
MS - 6S	5′3″–5′5″ 160–165	126–151 57–69
M - 6	5′5″–5′7″ 165–170	126–151 57–69
MT - 6T	5′7″–5′9″ 170–175	126–151 57–69
LS - 8S	5′5″–5′7″ 165–170	137–162 62–74
L - 8	5′7″–5′9″ 170–175	137–162 62–74
LT - 8T	5′9″–5′11″ 175–180	137–162 62–74
XLS - 10S	5′7″–5′9″ 170–175	148–173 67–79
XL - 10	5′9″–5′11″ 175–180	148–173 67–79
XLT - 10L	5′11″–6′1″ 180–185	148–173 67–79
2XLS - 12S	5′9″–5′11″ 175–180	159–184 72–84
2XL - 12	5′11″–6′1″ 180–185	159–184 72–84
3XL - 14	>6′1″ >185	>181 >82
4XL - 16	>6′1″ >185	>181 >82

Chest, waist and hips

Size	Chest in · cm	Waist in · cm	Hips in · cm
2XS - 0	31–33 79–84	25–27 64–69	31–33 79–84
XS - 2	32–34 81–86	27–30 69–76	34–36 86–91
S - 4	34–36 86–91	28–30 71–76	35–37 89–94
ST - 4T	34–36 86–91	28–30 71–76	35–37 89–94
MS - 6S	35–37 89–94	30–32 76–81	37–39 94–99
M - 6	35–37 89–94	30–32 76–81	37–39 94–99
MT - 6T	35–37 89–94	30–32 76–81	37–39 94–99
LS - 8S	37–39 94–99	32–34 81–86	38–40 96–101
L - 8	37–39 94–99	32–34 81–86	38–40 96–101
LT - 8T	37–39 94–99	32–34 81–86	38–40 96–101
XLS - 10S	38–40 96–101	33–35 84–89	40–42 101–107
XL - 10	38–40 96–101	33–35 84–89	40–42 101–107
XLT - 10L	38–40 96–101	33–35 84–89	40–42 101–107
2XLS - 12S	40–42 101–107	35–37 89–94	42–44 107–112
2XL - 12	40–42 101–107	35–37 89–94	42–44 107–112
3XL - 14	42–44 107–112	37–39 94–99	43–45 109–114
4XL - 16	43–45 109–114	38–40 96–101	45–47 114–119

How Scubapro measures

If you plan to wear a swimsuit or other items under your divewear, you should measure yourself while wearing those garments, keeping the tape measure parallel to the floor.

Chest: Measure around the fullest part of your chest.
Waist: Measure at the narrowest point of your waist.
Hips: Stand with your heels together and measure around the fullest part of your hips.

Source: Scubapro’s size chart (original chart).

Pick accessories — 90% off with your $50+ order

Your order unlocks accessories at 90% off.

Start $501 pick $1252 picks

DiveCatalog DIN Cap for 1st Stage (Female) for Scuba Diving Tanks - Scuba Essentials
$19.95$2.00

1
DiveCatalog Hose Clamp for Scuba Diving - Scuba Essentials
$17.95$1.80

1
DiveCatalog Neoprene Mask Strap Cover
$17.00$1.70

1
DiveCatalog Silicone Mouthpiece Replacement w/ installation - Scuba Essentials
$14.95$1.50

1
DiveCatalog Rubber Tank Valve Protector for Scuba Diving Tanks - Scuba Essentials
$11.95$1.20

1

90% off applies automatically at checkout on orders of $50+. Not combinable with discount codes.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Save with Open Box or Used Purchase

Used Scubapro Bolero Vest Diving Jacket 3mm Womens

Sale price $97.95 Regular price $151.00

Product Information

The Scubapro Hybrid 3mm Bolero Diving Jacket is a women's neoprene dive top built from X-Foam neoprene with smooth-skin front and back panels, a YKK front zipper, and Scubapro's Pure Design Concept seam layout for a body-conforming fit. It is designed as a stylish thermal layer for female divers who want extra core warmth without a full suit.

Who it is for

This jacket suits recreational female divers looking for a close-fitting top that adds thermal protection. It is designed to be worn with a Scubapro Hybrid Jane for additional thermal protection.

Key details

3mm X-Foam neoprene construction with smooth-skin front and back panels
Pure Design Concept uses fewer seams for a close, body-conforming fit
YKK front zipper for easy donning and doffing
Black and white colorway with pink accents
Weight of 1.35 lbs (XS reference weight)
Designed for recreational dive activity

Compatibility and sizing

The Bolero Jacket is available in XS, S, M, L, and XL. It is designed to be worn with a Scubapro Hybrid Jane for additional thermal protection as part of a layered two-piece system.

DiveCatalog.com is an authorized Scubapro dealer and has been a dive shop in Irvine, California since 2003. Call or chat with us if you have questions about sizing or pairing this jacket with a Hybrid Jane.

⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

Frequently Asked Questions

How should a wetsuit fit?

A wetsuit should feel snug everywhere, with no loose pockets at the lower back, armpits, or behind the knees where water can collect and flush. It will feel tighter than normal clothing on land, which is expected, because the suit works by holding a thin layer of water that your body warms. If you cannot take a full breath or the neck chokes you it is too small, and if you can pinch loose folds of neoprene it is too big.

What do you wear under a wetsuit?

Most divers wear a swimsuit, a rash guard, or a thin dive-specific base layer under a wetsuit. A slick base layer makes a tight suit much easier to pull on and cuts down chafing at the neck, shoulders, and underarms. Avoid thick cotton clothing, which soaks up water, bunches, and makes you colder rather than warmer.

How do you put on a tight wetsuit?

Work upward in small sections, pulling a little neoprene at a time rather than yanking on one spot, and get the suit fully seated at the ankles and knees before working on the hips and shoulders. A plastic bag over each foot and hand, or wetting the suit first, helps it slide into place. Grip with flat palms rather than fingertips, since fingernails are the most common cause of torn neoprene.

Does a thicker wetsuit mean a warmer wetsuit?

As a general rule, thicker neoprene insulates more, so a higher millimeter rating is warmer in the same conditions. Warmth also depends heavily on fit, suit style, seam construction, whether you add a hood, boots, and gloves, how long the dive is, and your own cold tolerance, so two divers in identical suits can feel very differently. Use thickness as a starting point and refine it against your local conditions and personal experience.

How do I care for and store a wetsuit?

Rinse it inside and out in fresh water after every dive day, and use a wetsuit-specific wash occasionally to control odor. Dry it inside-out first and then flip it, always out of direct sunlight, because UV and heat break down neoprene faster than anything else. Store it hanging on a wide-shouldered hanger or laid flat rather than folded, so you do not set permanent creases.

How long does a wetsuit last?

Lifespan depends far more on use and care than on age, so a suit dived hard in sun and chlorine may soften within a couple of seasons while a well-rinsed occasional-use suit can last many years. Signs a suit is finished include compressed neoprene that no longer feels buoyant or warm, splitting seams, and looseness in areas that used to be snug. Repairing small cuts and seam separations early adds meaningfully to a suit's life.

What is the difference between a full suit, a shorty, and wetsuit separates?

A full suit covers arms and legs, a shorty stops at the upper arms and thighs, and separates such as tops, bottoms, and hooded vests layer to add warmth where you want it. Layering a vest or top under a full suit adds core warmth and can extend the range of a suit you already own. Choose based on how much coverage you want, both for warmth and for protection against stings and abrasion.

Can the Scubapro Bolero Jacket be worn with other wetsuit pieces?

Yes, the Bolero Jacket is designed to be worn with a Scubapro Hybrid Jane bottom for extra thermal protection, forming a two-piece layered system. This lets a diver add or remove the jacket depending on water temperature rather than relying on a single full suit for every dive.

What sizes does the Scubapro Hybrid Bolero Jacket come in?

The Bolero Jacket is available in five sizes: XS, S, M, L, and XL. Each size has its own SKU and UPC, so confirm the size chart or reach out to DiveCatalog.com before ordering if you are between sizes.

What material is the Scubapro Bolero diving jacket made from?

It is built from 3mm X-Foam neoprene with smooth-skin front and back panels. The design also uses Scubapro's Pure Design Concept, which reduces the number of seams so the jacket fits closer to the body.

Is the 3mm Bolero Jacket warm enough for cold water diving?

The manufacturer lists a recreational activity level but no temperature rating; for added warmth it can be paired with a Hybrid Jane.

86%

(1177)

(114)

(37)

(16)

(31)

Excellent wetsuit but will it crush quickly like other wetsuits?

I purchased a BARE 5mm Reactive wetsuit (open box), which was like new, to replace my 1.5 yr old BARE 5mm Velocity wetsuit which had collapsed to only 2.5mm after 3 diving trips (~100 dives). The Reactive wetsuit is well constructed and very flexible. I had to increase the size of the Reactive suit, as it was smaller than the BARE Velocity suit of the same size. Tremendous customer service by Dive Catalog to exchange the wetsuit for proper size. I hope the Reactive suit does not crush so quickly like my other wetsuits (BARE, Henderson, Pinnacle). Hoping that the new technology in this suit will keep me warm below the thermocline.

Perfectly Built

Best of the many many diver hangers in my life. Easily supports my steel-plated BCD, while still donned with all of my accessories. No cracks, bends, or dents. Has even supported my BCD w/ a steel 100 tank attached (not recommended, for safety purposes, though).

Will continue to use this hanger for the long-term. No brainer.

Go-to Dive Hanger

This is a must-have for every diver. It's the quintessential hanger for all dive gear in one small package.

DiveCatalog's "Quick Dry Multi Accessory Dive Gear Hanger for Boots, Gloves, Hood" is set at a great price for a great product. Versatile enough that I've purchased extra hangers to organize my BMX racing gear.

Must-have for divers and anyone looking to organize their adventurous outdoor activities equipment.

Solid Hanger w/ Tons of Options

Does it's job and then some. The added accessory arms gives you options for a multitude of storage solutions. Solid build, solid pricing, must have for owns of dive gear.

New to this hanger...Now I'm a believer

Used tons of dive hangers, but never an upside down hanger. Game-changer for me. Will now add more of these in the near-future.

With it's swivel head design, it can cram itself into my tight dive locker, while still donning a ton of gear.

DiveCatalog's "Upside Down Drysuit Hanger w/ Regulator and Accessory Hooks" is a great product with solid construction at an affordable price. All of that with Dive Catalog's customer support/satisfaction guarantee.

Brand	Scubapro
Product Type	Wetsuits, Women's Top
Activity Level	Recreational
Gender	Women
Thickness	3mm
Material	X-Foam neoprene with smooth-skin panels
Zipper	YKK front zipper
Color	Black and white with pink accents
Weight	1.35 lbs (XS)
Sizes Available	XS, S, M, L, XL
MPN	63.752.400
UPC (XS)	4048336363563
UPC (S)	4048336363570
UPC (M)	4048336363594
UPC (L)	4048336363617
UPC (XL)	4048336363631