Scubapro Everflex Steamer 3/2mm Women's Wetsuit, Class C

Scubapro women’s wetsuit sizing. Imperial in bold, metric underneath.

Height and weight

Size	Height ft/in · cm	Weight lb · kg
2XS - 0	4′11″–5′1″ 150–155	93–118 42–54
XS - 2	5′1″–5′3″ 155–160	106–131 47–59
S - 4	5′3″–5′5″ 160–165	115–140 52–64
ST - 4T	5′5″–5′7″ 165–170	115–140 52–64
MS - 6S	5′3″–5′5″ 160–165	126–151 57–69
M - 6	5′5″–5′7″ 165–170	126–151 57–69
MT - 6T	5′7″–5′9″ 170–175	126–151 57–69
LS - 8S	5′5″–5′7″ 165–170	137–162 62–74
L - 8	5′7″–5′9″ 170–175	137–162 62–74
LT - 8T	5′9″–5′11″ 175–180	137–162 62–74
XLS - 10S	5′7″–5′9″ 170–175	148–173 67–79
XL - 10	5′9″–5′11″ 175–180	148–173 67–79
XLT - 10L	5′11″–6′1″ 180–185	148–173 67–79
2XLS - 12S	5′9″–5′11″ 175–180	159–184 72–84
2XL - 12	5′11″–6′1″ 180–185	159–184 72–84
3XL - 14	>6′1″ >185	>181 >82
4XL - 16	>6′1″ >185	>181 >82

Chest, waist and hips

Size	Chest in · cm	Waist in · cm	Hips in · cm
2XS - 0	31–33 79–84	25–27 64–69	31–33 79–84
XS - 2	32–34 81–86	27–30 69–76	34–36 86–91
S - 4	34–36 86–91	28–30 71–76	35–37 89–94
ST - 4T	34–36 86–91	28–30 71–76	35–37 89–94
MS - 6S	35–37 89–94	30–32 76–81	37–39 94–99
M - 6	35–37 89–94	30–32 76–81	37–39 94–99
MT - 6T	35–37 89–94	30–32 76–81	37–39 94–99
LS - 8S	37–39 94–99	32–34 81–86	38–40 96–101
L - 8	37–39 94–99	32–34 81–86	38–40 96–101
LT - 8T	37–39 94–99	32–34 81–86	38–40 96–101
XLS - 10S	38–40 96–101	33–35 84–89	40–42 101–107
XL - 10	38–40 96–101	33–35 84–89	40–42 101–107
XLT - 10L	38–40 96–101	33–35 84–89	40–42 101–107
2XLS - 12S	40–42 101–107	35–37 89–94	42–44 107–112
2XL - 12	40–42 101–107	35–37 89–94	42–44 107–112
3XL - 14	42–44 107–112	37–39 94–99	43–45 109–114
4XL - 16	43–45 109–114	38–40 96–101	45–47 114–119

How Scubapro measures

If you plan to wear a swimsuit or other items under your divewear, you should measure yourself while wearing those garments, keeping the tape measure parallel to the floor.

Chest: Measure around the fullest part of your chest.
Waist: Measure at the narrowest point of your waist.
Hips: Stand with your heels together and measure around the fullest part of your hips.

Source: Scubapro’s size chart (original chart).

Pick accessories — 90% off with your $250+ order

Your order unlocks accessories at 90% off.

Start $501 pick $1252 picks

DiveCatalog Moldable Mouthpiece w/ installation for Regulators
$34.95$3.50

1
DiveCatalog.com Universal Dive Gear Hanger with Accessory Arms fits Wetsuits, Drysuits, BCDs, Backpacks
$29.95$3.00

1
DiveCatalog.com Upside Down Drysuit Hanger w/ Regulator and Accessory Hooks
$29.95$3.00

1
DiveCatalog.com Small Retractor
$24.95$2.50

1
DiveCatalog.com Heavy Duty Wetsuit and Drysuit Hanger with Extra Wide Shoulder Saver
$22.95$2.30

1

90% off applies automatically at checkout on orders of $250+. Not combinable with discount codes.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Save with Open Box or Used Purchase

Used Scubapro Everflex Steamer 3/2 mm Womens

Sale priceFrom $268.95 Regular price $414.00

Product Information

The Scubapro Everflex Steamer 3/2mm Women's wetsuit is a back-zip, CE-certified Class C full suit built from 100% Everflex neoprene with an X-Foam formulation, designed for recreational and travel diving in water from 60.8°F to 75.2°F (16°C to 24°C).

Who it is for

This steamer suits women divers who need warm-water or shoulder-season thermal protection without bulk, whether on a liveaboard, a resort dive trip, or local warm-water outings. SCUBAPRO's Pure Design Concept uses fewer seams and panels so the suit moves with the body, making it a good match for divers who log multiple dives a day and want freedom of movement over long surface intervals and repeated donning.

Key details

3/2mm thickness, 100% Everflex neoprene (X-Foam formulation)
CE Class C certification rated for 60.8°F to 75.2°F (16°C to 24°C)
Back-zip entry with a diagonal rear YKK zipper and KA brass slider
Glued, blind-stitched seams: double blind-stitched outside, single blind-stitched inside
Diamond Span inner lining for water drainage plus a second lining for stretch
Fuse-cut cuffs at wrists and ankles, small neck zipper, and a compression-molded zipper flap/spine pad
Tatex knee and shoulder pads with an abrasion-resistant seat lining
Product weight is approximately 2.6 lb, though this varies by size

Compatibility and sizing

This wetsuit is offered in Black/White from 2XS to 4XL, including short and tall options (ST, MS, MT, LS, LT, XLS, XLT, 2XLS) to fine-tune torso and limb length, and in White in sizes 2XS, XS, and S.

What's in the box

Scubapro Everflex Steamer 3/2mm Women's wetsuit (suit only)

DiveCatalog.com is an authorized Scubapro dealer and a dive shop in Irvine, California, serving divers since 2003. Call or chat with us at 888-701-4017 if you have questions about sizing, fit, or color availability before you order.

⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

Frequently Asked Questions

How should a wetsuit fit?

A wetsuit should feel snug everywhere, with no loose pockets at the lower back, armpits, or behind the knees where water can collect and flush. It will feel tighter than normal clothing on land, which is expected, because the suit works by holding a thin layer of water that your body warms. If you cannot take a full breath or the neck chokes you it is too small, and if you can pinch loose folds of neoprene it is too big.

What do you wear under a wetsuit?

Most divers wear a swimsuit, a rash guard, or a thin dive-specific base layer under a wetsuit. A slick base layer makes a tight suit much easier to pull on and cuts down chafing at the neck, shoulders, and underarms. Avoid thick cotton clothing, which soaks up water, bunches, and makes you colder rather than warmer.

How do you put on a tight wetsuit?

Work upward in small sections, pulling a little neoprene at a time rather than yanking on one spot, and get the suit fully seated at the ankles and knees before working on the hips and shoulders. A plastic bag over each foot and hand, or wetting the suit first, helps it slide into place. Grip with flat palms rather than fingertips, since fingernails are the most common cause of torn neoprene.

Does a thicker wetsuit mean a warmer wetsuit?

As a general rule, thicker neoprene insulates more, so a higher millimeter rating is warmer in the same conditions. Warmth also depends heavily on fit, suit style, seam construction, whether you add a hood, boots, and gloves, how long the dive is, and your own cold tolerance, so two divers in identical suits can feel very differently. Use thickness as a starting point and refine it against your local conditions and personal experience.

How do I care for and store a wetsuit?

Rinse it inside and out in fresh water after every dive day, and use a wetsuit-specific wash occasionally to control odor. Dry it inside-out first and then flip it, always out of direct sunlight, because UV and heat break down neoprene faster than anything else. Store it hanging on a wide-shouldered hanger or laid flat rather than folded, so you do not set permanent creases.

How long does a wetsuit last?

Lifespan depends far more on use and care than on age, so a suit dived hard in sun and chlorine may soften within a couple of seasons while a well-rinsed occasional-use suit can last many years. Signs a suit is finished include compressed neoprene that no longer feels buoyant or warm, splitting seams, and looseness in areas that used to be snug. Repairing small cuts and seam separations early adds meaningfully to a suit's life.

What is the difference between a full suit, a shorty, and wetsuit separates?

A full suit covers arms and legs, a shorty stops at the upper arms and thighs, and separates such as tops, bottoms, and hooded vests layer to add warmth where you want it. Layering a vest or top under a full suit adds core warmth and can extend the range of a suit you already own. Choose based on how much coverage you want, both for warmth and for protection against stings and abrasion.

What sizes and colors does the Scubapro Everflex Steamer 3/2mm Women's wetsuit come in?

Black/White is offered in sizes 2XS to 4XL, with Short and Tall fit options (ST, MS, MT, LS, LT, XLS, XLT, 2XLS) to better match torso and limb length, while White is offered in sizes 2XS, XS, and S.

What's included when you order this wetsuit?

The box contains the Scubapro Everflex Steamer 3/2mm Women's wetsuit only; no hood, boots, gloves, or bag are bundled with it. If you need matching accessories for warm-water diving, pair the suit with separate neoprene boots or a rash guard.

Is the Everflex Steamer 3/2mm a back-zip or front-zip wetsuit?

It is a back-zip wetsuit, using a diagonal rear YKK zipper with a KA brass slider for entry and a compression-molded zipper flap and spine pad to reduce water seepage at the zipper line. A small neck zipper is also included for topside comfort.

What water temperature is the Everflex Steamer 3/2mm rated for?

It carries a CE Class C certification, rated for water temperatures from 60.8°F to 75.2°F (16°C to 24°C), making it suited to warm tropical dives and moderate shoulder-season conditions depending on your personal cold tolerance and dive duration.

86%

(1178)

(114)

(37)

(16)

(31)

Like dis

Like dis project

Excellent wetsuit but will it crush quickly like other wetsuits?

I purchased a BARE 5mm Reactive wetsuit (open box), which was like new, to replace my 1.5 yr old BARE 5mm Velocity wetsuit which had collapsed to only 2.5mm after 3 diving trips (~100 dives). The Reactive wetsuit is well constructed and very flexible. I had to increase the size of the Reactive suit, as it was smaller than the BARE Velocity suit of the same size. Tremendous customer service by Dive Catalog to exchange the wetsuit for proper size. I hope the Reactive suit does not crush so quickly like my other wetsuits (BARE, Henderson, Pinnacle). Hoping that the new technology in this suit will keep me warm below the thermocline.

Perfectly Built

Best of the many many diver hangers in my life. Easily supports my steel-plated BCD, while still donned with all of my accessories. No cracks, bends, or dents. Has even supported my BCD w/ a steel 100 tank attached (not recommended, for safety purposes, though).

Will continue to use this hanger for the long-term. No brainer.

Go-to Dive Hanger

This is a must-have for every diver. It's the quintessential hanger for all dive gear in one small package.

DiveCatalog's "Quick Dry Multi Accessory Dive Gear Hanger for Boots, Gloves, Hood" is set at a great price for a great product. Versatile enough that I've purchased extra hangers to organize my BMX racing gear.

Must-have for divers and anyone looking to organize their adventurous outdoor activities equipment.

Solid Hanger w/ Tons of Options

Does it's job and then some. The added accessory arms gives you options for a multitude of storage solutions. Solid build, solid pricing, must have for owns of dive gear.

Marketing Product Type	Steamers
Thickness	3/2mm
Material	100% Everflex Neoprene (X-Foam formulation)
Interior Lining	Diamond Span
Seams	Glued/Blind-Stitched
Entry Style	Back Zip
Temperature Rating	Class C, 60.8°F to 75.2°F (16°C to 24°C)
Certification	CE Class C
Product Weight	Approximately 2.6 lb, varies by size and color
Activity	Recreational, Travel
Colors	White, Black/White
Sizes	2XS to 4XL, including Short and Tall options

Scubapro Everflex Steamer 3/2 MM Womens Full Scuba Diving Wetsuit

Pick accessories — 90% off with your $250+ order

Payment & Security

Save with Open Box or Used Purchase