Scubapro Seahawk 2 with BPI

The Seahawk 2 is a traditional back-inflation BCD: the air cell sits behind you for a streamlined profile and stable horizontal trim, while up front you get quick-release integrated weight pouches, two rear trim pouches, and six stainless D-rings for accessories. It is built from tough 1000- and 420-denier nylon with a reinforced soft backpack and Super Cinch stainless tank band, and comes in sizes 2XS–2XL with your choice of BPI or AIR2 inflator.

Per ScubaPro's official size chart: 38.2 lbs (17.3 kg) of lift in 2XS and XS, and a substantial 54 lbs (24.4 kg) in sizes S through 2XL — enough for cold-water rigs and heavy steel tanks. Dry weight with the inflator runs 6.8–7.5 lbs depending on size, so it packs reasonably for a full-featured back-inflate.

Both are back-inflation BCDs, but they are built differently. The Seahawk 2 is the classic approach: durable nylon fabric, a padded soft backpack, and proven quick-release buckle weight pouches. The Hydros Pro 2 is ScubaPro's modular flagship: an injection-molded Monprene gel harness that molds to your body, the Monorail slide-and-lock weight system, an Ergo-Lite back plate, and an instant-dry bladder. The Seahawk 2 delivers more lift per size at a lower price; the Hydros Pro 2 offers the custom fit and modularity.

A BCD should fit snugly enough that it does not ride up toward your ears when inflated, while still letting you breathe fully. Fasten the waist and cummerbund first, then adjust the shoulder straps so the tank sits close to your back and the shoulders cannot slide off. With the BCD fully inflated at the surface you should still be able to take a deep, comfortable breath; if it squeezes your chest, loosen it or move up a size.

Rinse the outside in fresh water and also flush the inside of the bladder, because salt water gets in through the inflator and dump valves. Fill the bladder roughly a third full of fresh water through the oral inflator, slosh it around, then drain it out through the inflator and each dump valve. Hang it to dry out of direct sunlight and store it partially inflated so the bladder walls do not stick together.

Integrated weight pockets carry the lead in the BCD itself, which many divers find more comfortable and easier on the hips, while a weight belt keeps the weight independent of your BCD. Either way, you must be able to release your ditchable weight quickly with one hand, and your buddy should know how your system releases. Non-ditchable trim pockets are useful for balance but should never hold weight you might need to drop.

Make sure the BCD is completely dry inside and out before packing so it does not mildew in transit. Remove all weights, deflate it fully, and fold or roll it around softer items such as a wetsuit to cushion the inflator and valves. Avoid hard creases in the air cell, and unpack and air it out as soon as you arrive.

Follow the service interval in the manufacturer's manual, which is commonly an annual inspection alongside the rest of your life-support gear. Have the inflator, dump valves, and bladder checked any time the inflator sticks, free-flows, feels rough, or the BCD holds air poorly. Between services, confirm that it inflates and deflates properly as part of every pre-dive check.

A jacket-style BCD holds air in panels that wrap around your sides as well as your back, while a back-inflate BCD keeps the entire air cell behind you. Jacket styles tend to feel very stable and upright at the surface, and back-inflate styles keep the chest clear and are often preferred for horizontal trim underwater. Neither is objectively better, so treat it as a fit and preference decision and try both if you can.

Most recreational BCDs use an adjustable cam band sized for common single-cylinder diameters, so standard aluminum and steel tanks generally work. Re-check the band tension after the first wetting, because webbing can relax slightly and let the tank shift. If you dive doubles or unusual cylinder diameters, confirm compatibility with the manufacturer before assuming it will hold.

The Seahawk 2 is a unisex BCD offered in seven sizes: 2XS, XS, S, M, L, XL and 2XL. The 2XL with BPI (item 22.142.610) is listed at 8.36 lb, length 21.75 inches.

Both are the same BCD; only the inflator differs. This version uses the Balanced Power Inflator (BPI), a standard low-pressure inflator and oral inflate/deflate unit on the corrugated hose. The AIR2 version replaces that unit with Scubapro's AIR2, which combines the power inflator with an alternate air source so it doubles as your backup second stage.

It uses a Super Cinch stainless steel tank band positioned lower on the pack, backed up by a second Velcro strap. The reinforced soft backpack adds a high-grip tank patch and inner padding behind the stainless steel back plate. Re-check band tension after the first wetting, since webbing can relax slightly when soaked.

The Seahawk 2 carries two large zippered cargo pockets and eight D-rings: six 40 mm stainless steel rings plus two 25 mm rings on the pockets. It also includes quick-release integrated weight pouches and two rear trim pouches for balanced weight distribution.