Zeagle Ranger LTD w/Inflator, Hose and RE Valve
In stock — ships from Irvine, CA
This item is currently on backorder. Order now to reserve yours, and we will ship it as soon as it is back in stock.
Zeagle Ranger LTD w/Inflator, Hose and RE Valve - S (Small) is backordered and will ship as soon as it is back in stock.
Pickup available at In Store
Usually ready in 2 hours
Zeagle Scout, Stiletto, Ranger, Tech, 911 and SAR BCD sizing. Imperial in bold, metric underneath.
| Size | Waist (vest size) in · cm |
Torso (shoulder size) in · cm |
|---|---|---|
| SM |
35 89 |
14–18 46–65.5 |
| MD |
33–41 84–104 |
18–22 46–56 |
| LG |
37–45 84–114 |
22–26 56–66 |
| XL |
42–50 107–127 |
26–29 66–74 |
How Zeagle measures
- Waist (vest size): Measure waist size.
- Torso (shoulder size): Measure shoulder to top of hip.
Source: Zeagle’s size chart. Values in the second unit come from Zeagle’s own chart where it prints them.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Save with Open Box or Used Purchase
Save with a package
Ready-made packages that include this item
Product Information
The Zeagle Ranger LTD BCD is a rear-inflate, weight-integrated buoyancy compensator built on the classic Ranger platform, with 44 lbs / 19.96 kg of lift, heavily reinforced 1050 denier ballistic nylon construction and the Ripcord one-handed weight-ditching system. This configuration ships with an inflator, hose and RE Valve, and Zeagle's Personal Fit System lets you set waist size, chest size and torso length independently.
Who it is for
It suits divers who want one durable harness that adapts to their body and their diving configuration. Because the Ranger LTD accepts single or twin tank setups and has 11-inch grommets for twin cylinder mounting, it also works for divers moving toward doubles or carrying a pony bottle. Sizes run XS through 3XL, so it is a practical choice for divers who struggle to fit a one-size-fits-most jacket.
Key details
- Rear-inflate bladder with 44 lbs / 19.96 kg lift; dry weight 9.5 lbs / 4.31 kg
- Ripcord weight system rated to 36 lbs / 16.31 kg, plus a 20 lbs / 9.07 kg rear trim weight system
- 8 stainless steel D-rings: 4 on the shoulders, 2 on the vest, 2 at the rear
- Two zippered side utility pockets and an expandable zippered pocket on the front
- Zipper attachment system inside each bladder wing for pony bottle carriers, Spare Air carriers and extra pockets
- Super-duty Airloc buckles swivel to adjust harness contour and reduce chest and underarm restriction
- Adjustable sternum strap, adjustable elastic waist panels and a permanently mounted lumbar pad
Compatibility and sizing
Standard sizes are XS, S, M, L and XL, with XXL, XXXL and XXXXL offered as custom sizes; custom colors are also available. The Personal Fit System means waist, chest and torso length adjust separately, so two divers of the same height can both be dialed in. Single or twin tank capability is built in.
What's in the box
- Zeagle Ranger LTD BCD with inflator, hose and RE Valve
- Pair of mesh weight pouches, 18 lbs / 8.2 kg capacity each
DiveCatalog.com is an authorized Zeagle dealer and a real dive shop in Irvine, California since 2003. Call 888-701-4017 or start a chat if you want help choosing a size or confirming twin tank and accessory compatibility.
- Ripcord weight system releases ditchable lead with one hand, and the weights are reusable after deployment.
- Personal Fit System adjusts waist size, chest size and torso length independently for a tailored fit.
- 44 lbs / 19.96 kg lift from the standard rear-inflate ballistic bladder.
- 36 lbs / 16.31 kg Ripcord capacity plus a 20 lbs / 9.07 kg rear trim weight system to balance your position.
- 1050 denier ballistic nylon heavily reinforced construction for long service life.
- 8 stainless steel D-rings placed 4 on the shoulders, 2 on the vest and 2 at the rear.
- Single or twin tank capability with 11-inch grommets for twin cylinder mounting.
- Three utility pockets including two zippered side pockets and an expandable zippered pocket on the front.
- Internal zipper attachment system inside each bladder wing accepts pony bottle carriers, Spare Air carriers and extra pockets.
- Super-duty Airloc buckles swivel to contour the harness and reduce chest and underarm restriction.
- Comfort details include an adjustable sternum strap, adjustable elastic waist panels and a permanently mounted lumbar pad.
- Includes inflator, hose and RE Valve and a pair of 18 lbs / 8.2 kg mesh weight pouches.
- Limited Lifetime Guarantee to the original owner against defects in materials and workmanship, with registration required within 30 days.
| Inflation Type | Rear Inflate |
| Lift Capacity | 44 lbs / 19.96 kg |
| Weight Capacity (Ripcord) | 36 lbs / 16.31 kg |
| Rear Weight System | 20 lbs / 9.07 kg |
| Ripcord | Yes |
| Dry Weight | 9.5 lbs / 4.31 kg |
| Material | 1050 denier ballistic nylon, reinforced |
| D-Rings | 8 stainless steel (4 shoulders, 2 vest, 2 rear) |
| Hardware | Stainless steel D-rings and buckles, swiveling Airloc buckles |
| Sizing System | Personal Fit System (waist, chest, torso length) |
| Standard Sizes | XS, S, M, L, XL |
| Custom Size | XXL / XXXL / XXXXL |
| Color | Black (custom colors available) |
| Custom Colors | Yes |
| Tank Configuration | Single or twin tank; 11-inch grommets for twin cylinders |
| Pockets | Two zippered side pockets, one expandable zippered front pocket |
| Back Padding | Permanently mounted lumbar pad |
| Warranty | Limited Lifetime Guarantee to the original owner (registration within 30 days) |
- Zeagle Ranger LTD BCD
- Inflator, hose and RE Valve
- Pair of mesh weight pouches, 18 lbs / 8.2 kg capacity each
⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
How should a scuba BCD fit?
A BCD should fit snugly enough that it does not ride up toward your ears when inflated, while still letting you breathe fully. Fasten the waist and cummerbund first, then adjust the shoulder straps so the tank sits close to your back and the shoulders cannot slide off. With the BCD fully inflated at the surface you should still be able to take a deep, comfortable breath; if it squeezes your chest, loosen it or move up a size.
How do I rinse and care for a BCD after diving?
Rinse the outside in fresh water and also flush the inside of the bladder, because salt water gets in through the inflator and dump valves. Fill the bladder roughly a third full of fresh water through the oral inflator, slosh it around, then drain it out through the inflator and each dump valve. Hang it to dry out of direct sunlight and store it partially inflated so the bladder walls do not stick together.
Should I use integrated weights or a weight belt?
Integrated weight pockets carry the lead in the BCD itself, which many divers find more comfortable and easier on the hips, while a weight belt keeps the weight independent of your BCD. Either way, you must be able to release your ditchable weight quickly with one hand, and your buddy should know how your system releases. Non-ditchable trim pockets are useful for balance but should never hold weight you might need to drop.
How do I pack a BCD for travel?
Make sure the BCD is completely dry inside and out before packing so it does not mildew in transit. Remove all weights, deflate it fully, and fold or roll it around softer items such as a wetsuit to cushion the inflator and valves. Avoid hard creases in the air cell, and unpack and air it out as soon as you arrive.
When does a BCD need to be serviced?
Follow the service interval in the manufacturer's manual, which is commonly an annual inspection alongside the rest of your life-support gear. Have the inflator, dump valves, and bladder checked any time the inflator sticks, free-flows, feels rough, or the BCD holds air poorly. Between services, confirm that it inflates and deflates properly as part of every pre-dive check.
What is the difference between a jacket-style and a back-inflate BCD?
A jacket-style BCD holds air in panels that wrap around your sides as well as your back, while a back-inflate BCD keeps the entire air cell behind you. Jacket styles tend to feel very stable and upright at the surface, and back-inflate styles keep the chest clear and are often preferred for horizontal trim underwater. Neither is objectively better, so treat it as a fit and preference decision and try both if you can.
Will my BCD fit any scuba tank?
Most recreational BCDs use an adjustable cam band sized for common single-cylinder diameters, so standard aluminum and steel tanks generally work. Re-check the band tension after the first wetting, because webbing can relax slightly and let the tank shift. If you dive doubles or unusual cylinder diameters, confirm compatibility with the manufacturer before assuming it will hold.
How much weight can the Zeagle Ranger LTD carry?
The Ripcord ditchable weight system is rated to 36 lbs / 16.31 kg. The rear trim weight system adds up to 20 lbs / 9.07 kg. The BCD ships with a pair of mesh weight pouches rated at 18 lbs / 8.2 kg each. Lift capacity on the standard bladder is 44 lbs / 19.96 kg, and the BCD's own dry weight is 9.5 lbs / 4.31 kg.
How does the Ripcord weight system work?
Ripcord lets you ditch your integrated lead with one hand, and the weights are reusable if the system is deployed. The Ranger LTD's Ripcord system is rated to 36 lbs / 16.31 kg of ditchable weight.
Can the Ranger LTD be used with twin tanks?
Yes. The Zeagle Ranger LTD has single or twin tank capability and includes 11-inch grommets for mounting twin cylinders. Inside each bladder wing there is also a zipper attachment system that accepts pony bottle carriers, Spare Air carriers, extra pockets and grommet panels, so you can build the rig up for stage or redundant gas. Call us to confirm the straps you need for your cylinders.
What sizes does the Zeagle Ranger LTD come in, and how does Personal Fit sizing work?
Standard sizes are XS, S, M, L and XL, with XXL, XXXL and XXXXL available as custom sizes. The Personal Fit System adjusts waist size, chest size and torso length independently, so the harness can be set for your build rather than a single generic shape. Swiveling super-duty Airloc buckles also let you contour the shoulder harness to reduce chest and underarm restriction.
Review summary
Written reviews for this one are still few. The Ranger LTD is a back-inflate scuba BCD from Zeagle, built on the classic Ranger design with the Personal Fit System for a customized fit. It comes with an inflator hose and RE Valve, uses a rear-inflate bladder, and is made from 1050 denier Ballistic nylon with modular sizing. It accommodates single or twin tank setups and includes multiple weight systems, pockets, and attachment points. A good match for divers who want a durable, configurable back-inflate BCD.













