Free Shipping on Most Orders Over $50 | Get up to 10% cashback | Need It Today? Same-Day Delivery Within 50 Miles

Tusa Liberator Open Water Diving Package

Tusa  |  SKU: GE-0103-13-790-XS
Refer & Earn

Regular price $1,365.00
Shipping calculated at checkout.

In stock — ships from Irvine, CA


Configuration
Size

Pickup available at In Store

Usually ready in 2 hours


Pick accessories — 90% off with your $1000+ order

and your picks are free.

 

Start  $501 pick $1252 picks
  • DiveCatalog.com Silicone Frameless Dive Mask

    $59.95$6.00

    1
  • DiveCatalog.com Retro Oval Dive Mask Without Nose Pocket Compensator

    $44.95$4.50

    1
  • DiveCatalog.com Classic Oval Dive Mask Silicone

    $44.95$4.50

    1
  • DiveCatalog.com Metal Coil Lanyard with Snap Clips

    $39.95$4.00

    1
  • DiveCatalog.com Junior Rubber Oval Dive Mask (15% smaller)

    $34.95$3.50

    1


Payment & Security

Payment methods

  • Amazon
  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Product Information

Tusa Liberator Open Water Diving Package is a complete recreational scuba setup that bundles the Liberator BC0103B jacket-style BCD, the RS-790 regulator with R-700 first stage and S-90 second stage, the SS-0001 Safe Second octopus, the Element III Console dive computer, and a BA0103 mesh backpack, available in sizes XS to XL with lift capacities ranging from 18 lbs (8.2 kg) in XS to 46.1 lbs (20.9 kg) in XL.

Who it is for

This package suits divers assembling a full open water kit in one purchase: a jacket-style BCD sized XS to XL, a balanced-diaphragm regulator optimized for water temperatures of 50°F/10°C and below, a spare second stage, a dive computer, and a mesh gear bag for transport.

Key details

The Liberator BCD uses TUSA's Advanced Weight Loading System III (AWLS III) with releasable weight cartridges holding up to 8 lbs (3.63 kg) each, an Ultimate Stabilizing Harness (U.S.H.) to resist tank-roll, and a RiteTite two-position cam buckle. Its shell is 500D Cordura exterior with 420D nylon interior and urethane air-cell lamination, and BC weight runs 7.1 to 7.7 lbs (3.2 to 3.5 kg) depending on size. The RS-790 first stage is a balanced diaphragm design with an anti-freeze system and a dry constant-pressure chamber with ribbed sections for heat transfer, feeding 2 HP ports and 4 LP ports (2 standard, 2 high-flow, about 15% more air flow). The S-90 second stage is a lightweight composite case with pneumatic balancing, a Venturi adjustment lever, and an ortho-conscious mouthpiece. The SS-0001 octopus shares the same composite case, Venturi lever, and mouthpiece, with a classic downstream valve, large diaphragm, large purge button, and a reversible hose attachment for left or right-hand mounting. The Element III Console runs Dive, Gauge, and Watch modes on the Bühlmann ZHL-16C algorithm, logs more than 500 dives, is Nitrox compatible, and uses a user-changeable CR2450 battery, alongside a pressure gauge with temperature readout and a rear-mounted compass module.

Compatibility and sizing

The Liberator BCD is offered in sizes XS, S, M, L, and XL and is TUSA DUO AIR II compatible. The RS-790 is available in Yoke and DIN configurations, with the RS-790 DIN rated to 300 bar/4350 psi. The SS-0001 octopus mounts on either the left or right side via its reversible hose attachment.

What's in the box

  • Liberator BC0103B buoyancy compensator
  • RS-790 regulator (R-700 first stage)
  • S-90 second stage
  • SS-0001 Safe Second octopus
  • Element III Console computer (SC1301)
  • Mesh Backpack (BA0103)

DiveCatalog.com is an authorized TUSA dealer and a dive shop in Irvine, California, operating since 2003. Call or chat with us at 888-701-4017 if you have questions about sizing, DIN versus Yoke fit, or compatibility before you order.

⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

Frequently Asked Questions

How should a scuba BCD fit?

A BCD should fit snugly enough that it does not ride up toward your ears when inflated, while still letting you breathe fully. Fasten the waist and cummerbund first, then adjust the shoulder straps so the tank sits close to your back and the shoulders cannot slide off. With the BCD fully inflated at the surface you should still be able to take a deep, comfortable breath; if it squeezes your chest, loosen it or move up a size.

How do I rinse and care for a BCD after diving?

Rinse the outside in fresh water and also flush the inside of the bladder, because salt water gets in through the inflator and dump valves. Fill the bladder roughly a third full of fresh water through the oral inflator, slosh it around, then drain it out through the inflator and each dump valve. Hang it to dry out of direct sunlight and store it partially inflated so the bladder walls do not stick together.

Should I use integrated weights or a weight belt?

Integrated weight pockets carry the lead in the BCD itself, which many divers find more comfortable and easier on the hips, while a weight belt keeps the weight independent of your BCD. Either way, you must be able to release your ditchable weight quickly with one hand, and your buddy should know how your system releases. Non-ditchable trim pockets are useful for balance but should never hold weight you might need to drop.

How do I pack a BCD for travel?

Make sure the BCD is completely dry inside and out before packing so it does not mildew in transit. Remove all weights, deflate it fully, and fold or roll it around softer items such as a wetsuit to cushion the inflator and valves. Avoid hard creases in the air cell, and unpack and air it out as soon as you arrive.

When does a BCD need to be serviced?

Follow the service interval in the manufacturer's manual, which is commonly an annual inspection alongside the rest of your life-support gear. Have the inflator, dump valves, and bladder checked any time the inflator sticks, free-flows, feels rough, or the BCD holds air poorly. Between services, confirm that it inflates and deflates properly as part of every pre-dive check.

What is the difference between a jacket-style and a back-inflate BCD?

A jacket-style BCD holds air in panels that wrap around your sides as well as your back, while a back-inflate BCD keeps the entire air cell behind you. Jacket styles tend to feel very stable and upright at the surface, and back-inflate styles keep the chest clear and are often preferred for horizontal trim underwater. Neither is objectively better, so treat it as a fit and preference decision and try both if you can.

Will my BCD fit any scuba tank?

Most recreational BCDs use an adjustable cam band sized for common single-cylinder diameters, so standard aluminum and steel tanks generally work. Re-check the band tension after the first wetting, because webbing can relax slightly and let the tank shift. If you dive doubles or unusual cylinder diameters, confirm compatibility with the manufacturer before assuming it will hold.

Does this package come with a Yoke or DIN regulator?

It includes the Yoke RS-790; a separate RS-790 DIN version rated to 300 bar/4350 psi exists.

What dive computer comes with the Tusa Liberator Open Water Diving Package and what battery does it use?

The package includes the Element III Console (SC1301), which runs Dive, Gauge, and Watch modes on the Bühlmann ZHL-16C algorithm, is Nitrox compatible, logs more than 500 dives, and includes a rear-mounted compass module. It uses a user-changeable CR2450 battery.

Can the SS-0001 Safe Second octopus be mounted on either side?

Yes. The SS-0001 Safe Second octopus has a reversible hose attachment that allows it to be configured for either left or right-hand mounting, so divers can position it according to their preferred setup.

What is included in the Tusa Liberator Open Water Diving Package?

The package includes the Liberator BC0103B buoyancy compensator, the RS-790 regulator with R-700 first stage and S-90 second stage, the SS-0001 Safe Second octopus, the Element III Console computer (SC1301), and the BA0103 mesh backpack.