Scubapro S - TEK Donut Wing 60 + S - TEK Pro Harness SS
In stock — ships from Irvine, CA
Scubapro S - TEK Donut Wing 60 + S - TEK Pro Harness SS is backordered and will ship as soon as it is back in stock.
Pickup currently unavailable at 23D
You May Need These
Description
Description
The SCUBAPRO S-TEK Pro System combines a Donut Wing 60 with the S-TEK Pro Harness SS to deliver reliable lift and a comfortable fit for twin-tank diving. Built for rugged use in scuba and underwater exploration, this system emphasizes durability, a precise fit, and practical features for depth-rated diving.
The 3D formed back plate and molded Monprene pads cushion shoulders, waist, and back for enhanced comfort during extended dives. Adjustable TEK LOC shoulders provide a snug fit, while EVO Angle webbing slots allow natural webbing routing to reduce abrasion and improve diver comfort. The back plate includes mounting points for trim weights, an argon tank mounting point, and a built-in carry handle, adding practical versatility to the setup.
Features
Features
- Donut wing with 1000D Cordura outer shell and 500D Cordura inner bladder; improved rounded profile to reduce air trapping
- Technical BCD with a lift capacity of 60 lbs (27 kg) and six D-rings for gear attachment
- Back plate made of stainless steel with PU-coated 1000 Denier Cordura nylon construction for durability in demanding environments
- Recessed Wing Nut Socket with S-Tek Ergo Nuts designed for cold, wet, or gloved hands; flush mounted to prevent suit abrasion
- Two pre-bent D-rings on the shoulders, one on the waist, and two on the crotch strap for clipping on extra gear
- Back plate mounting points support trim weights and an argon tank mounting point; built-in carry handle adds carry ease
- Branded silicone epaulet on the left shoulder and silicone guide bands keep inflator hose and straps in place
- Six D-rings and a robust harness system enable secure attachment of gear for technical and diving applications
- Elongated, mechanically shaped back plate reduces bulk while providing stable trim during underwater movement
- Compatible with standard wing nuts and designed for use in technical diving scenarios
- Materials and construction emphasize durability for scuba and underwater exploration gear
- Separate weight and attachment points support a balanced buoyancy control setup in various diving conditions
Specifications
Specifications
| BCD Type | Technical |
| Lift Capacity | 60 lbs |
| Lift Capacity | 27 kg |
| Number of D-Rings | 6 |
| Weight | 9.833 lb |
| Materials | PU-Coated 1000 Denier Cordura Nylon |
| Back Plate Material | Stainless Steel |
| Activity | Technical |
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
How should a scuba BCD fit?
A BCD should fit snugly enough that it does not ride up toward your ears when inflated, while still letting you breathe fully. Fasten the waist and cummerbund first, then adjust the shoulder straps so the tank sits close to your back and the shoulders cannot slide off. With the BCD fully inflated at the surface you should still be able to take a deep, comfortable breath; if it squeezes your chest, loosen it or move up a size.
How do I rinse and care for a BCD after diving?
Rinse the outside in fresh water and also flush the inside of the bladder, because salt water gets in through the inflator and dump valves. Fill the bladder roughly a third full of fresh water through the oral inflator, slosh it around, then drain it out through the inflator and each dump valve. Hang it to dry out of direct sunlight and store it partially inflated so the bladder walls do not stick together.
Should I use integrated weights or a weight belt?
Integrated weight pockets carry the lead in the BCD itself, which many divers find more comfortable and easier on the hips, while a weight belt keeps the weight independent of your BCD. Either way, you must be able to release your ditchable weight quickly with one hand, and your buddy should know how your system releases. Non-ditchable trim pockets are useful for balance but should never hold weight you might need to drop.
How do I pack a BCD for travel?
Make sure the BCD is completely dry inside and out before packing so it does not mildew in transit. Remove all weights, deflate it fully, and fold or roll it around softer items such as a wetsuit to cushion the inflator and valves. Avoid hard creases in the air cell, and unpack and air it out as soon as you arrive.
When does a BCD need to be serviced?
Follow the service interval in the manufacturer's manual, which is commonly an annual inspection alongside the rest of your life-support gear. Have the inflator, dump valves, and bladder checked any time the inflator sticks, free-flows, feels rough, or the BCD holds air poorly. Between services, confirm that it inflates and deflates properly as part of every pre-dive check.
What is the difference between a jacket-style and a back-inflate BCD?
A jacket-style BCD holds air in panels that wrap around your sides as well as your back, while a back-inflate BCD keeps the entire air cell behind you. Jacket styles tend to feel very stable and upright at the surface, and back-inflate styles keep the chest clear and are often preferred for horizontal trim underwater. Neither is objectively better, so treat it as a fit and preference decision and try both if you can.
Will my BCD fit any scuba tank?
Most recreational BCDs use an adjustable cam band sized for common single-cylinder diameters, so standard aluminum and steel tanks generally work. Re-check the band tension after the first wetting, because webbing can relax slightly and let the tank shift. If you dive doubles or unusual cylinder diameters, confirm compatibility with the manufacturer before assuming it will hold.
