Free 1-2 Day Shipping | Get up to 10% cashback | Need It Today? Same-Day Delivery Within 50 Miles

Bare Velocity Ultra 8/7mm Semi Dry Mens Wetsuit

Bare  |  SKU: 002189BLK-20M
Refer & Earn

Regular price $579.95
Shipping calculated at checkout.

In stock — ships from Irvine, CA


Size
Not sure of your size? Matched to Bare’s size chart

Pickup available at In Store

Usually ready in 2 hours


Pick accessories — 90% off with your $250+ order

and your picks are free.

 

Start  $501 pick $1252 picks
  • DiveCatalog Moldable Mouthpiece w/ installation for Regulators

    $34.95$3.50

    1
  • DiveCatalog.com Upside Down Drysuit Hanger w/ Regulator and Accessory Hooks

    $29.95$3.00

    1
  • DiveCatalog.com Universal Dive Gear Hanger with Accessory Arms fits Wetsuits, Drysuits, BCDs, Backpacks

    $29.95$3.00

    1
  • DiveCatalog.com Small Retractor

    $24.95$2.50

    1
  • DiveCatalog.com Heavy Duty Wetsuit and Drysuit Hanger with Extra Wide Shoulder Saver

    $22.95$2.30

    1


Payment & Security

Payment methods

  • Amazon
  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Product Information

The Bare Velocity Ultra 8/7mm Semi Dry Men's Wetsuit is a men's semi-dry scuba suit built from Progressive Full-Stretch neoprene with OmniRed Infrared Technology in the torso and hood, a front-entry cross-chest dry zipper, and an attached hood.

Who it is for

The attached hood, anatomical pattern, and dry-zipper entry suit divers wanting warmth and mobility over extended scuba sessions.

Key details

  • 8/7mm Progressive Full-Stretch neoprene for a balance of warmth and mobility.
  • OmniRed Infrared Technology in the torso and attached hood for added warmth during underwater exposure.
  • Attached hood with OmniRed lining and a 2mm internal pullover bib for insulation without bulk.
  • Front-entry cross-chest heavy-duty plastic dry zipper for donning and water protection.
  • Skin-to-skin double 3mm GLIDESKIN wrist and ankle seals for a secure, flexible closure.
  • 10mm spine and kidney pad, PROTEKT knee protection, and embossed back knee flex panels.
  • Seams are double glued with SECURE-LOCK construction to minimize water entry.

Compatibility and sizing

The Velocity Ultra 8/7mm Semi Dry is offered in a full men's size run: S, M, MT, ML, MLS, MLT, L, LS, LT, XL, XLS, XLT, 2XL, 2XLS, and 3XL, so short and tall body types have dedicated options alongside standard sizing.

DiveCatalog.com is an authorized Bare dealer and has operated as a dive shop in Irvine, California since 2003. Call 888-701-4017 or start a chat if you need help choosing a size or confirming fit before you order.

⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

Frequently Asked Questions

How should a wetsuit fit?

A wetsuit should feel snug everywhere, with no loose pockets at the lower back, armpits, or behind the knees where water can collect and flush. It will feel tighter than normal clothing on land, which is expected, because the suit works by holding a thin layer of water that your body warms. If you cannot take a full breath or the neck chokes you it is too small, and if you can pinch loose folds of neoprene it is too big.

What do you wear under a wetsuit?

Most divers wear a swimsuit, a rash guard, or a thin dive-specific base layer under a wetsuit. A slick base layer makes a tight suit much easier to pull on and cuts down chafing at the neck, shoulders, and underarms. Avoid thick cotton clothing, which soaks up water, bunches, and makes you colder rather than warmer.

How do you put on a tight wetsuit?

Work upward in small sections, pulling a little neoprene at a time rather than yanking on one spot, and get the suit fully seated at the ankles and knees before working on the hips and shoulders. A plastic bag over each foot and hand, or wetting the suit first, helps it slide into place. Grip with flat palms rather than fingertips, since fingernails are the most common cause of torn neoprene.

Does a thicker wetsuit mean a warmer wetsuit?

As a general rule, thicker neoprene insulates more, so a higher millimeter rating is warmer in the same conditions. Warmth also depends heavily on fit, suit style, seam construction, whether you add a hood, boots, and gloves, how long the dive is, and your own cold tolerance, so two divers in identical suits can feel very differently. Use thickness as a starting point and refine it against your local conditions and personal experience.

How do I care for and store a wetsuit?

Rinse it inside and out in fresh water after every dive day, and use a wetsuit-specific wash occasionally to control odor. Dry it inside-out first and then flip it, always out of direct sunlight, because UV and heat break down neoprene faster than anything else. Store it hanging on a wide-shouldered hanger or laid flat rather than folded, so you do not set permanent creases.

How long does a wetsuit last?

Lifespan depends far more on use and care than on age, so a suit dived hard in sun and chlorine may soften within a couple of seasons while a well-rinsed occasional-use suit can last many years. Signs a suit is finished include compressed neoprene that no longer feels buoyant or warm, splitting seams, and looseness in areas that used to be snug. Repairing small cuts and seam separations early adds meaningfully to a suit's life.

What is the difference between a full suit, a shorty, and wetsuit separates?

A full suit covers arms and legs, a shorty stops at the upper arms and thighs, and separates such as tops, bottoms, and hooded vests layer to add warmth where you want it. Layering a vest or top under a full suit adds core warmth and can extend the range of a suit you already own. Choose based on how much coverage you want, both for warmth and for protection against stings and abrasion.

What sizes does the Bare Velocity Ultra 8/7mm Semi Dry wetsuit come in?

It comes in S, M, MT, ML, MLS, MLT, L, LS, LT, XL, XLS, XLT, 2XL, 2XLS, and 3XL, including short and tall options.

Does the Bare Velocity Ultra 8/7mm Semi Dry have an attached hood?

Yes, it has an attached hood built with OmniRed lining for added warmth and a 2mm internal pullover bib that adds insulation without extra bulk. Yes, the hood is attached to the suit rather than being a separate piece.

How do you get into the Bare Velocity Ultra 8/7mm Semi Dry wetsuit?

Entry is through a front-entry cross-chest heavy-duty plastic dry zipper. This zipper placement is designed for reliable water protection and easy donning.

What is OmniRed Infrared Technology on this wetsuit?

OmniRed Infrared Technology is built into the torso and hood of the suit to add warmth during underwater exposure. It works alongside the 8/7mm Progressive Full-Stretch neoprene and the hood's 2mm internal pullover bib to add warmth.

  • 5 stars: 4 (100%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
D
Dan
Review

I use the suit for 30 dives at this point. The water temperature is at the bottom 48-50F (9-10C) at 21 to 30 m (70 to 100) If you go under 21 m, it’s not a bad idea to add a 3mm vest because at the zipper there is just a thinner single layer of neoprene (2mm). By adding the 3mm vest that suit start to shine. At no point above 70 feet was the cold a problem. Below 70 feet you can feel it, but that was tolerable on a single tank. You will need more weight then a wetsuit but less then a drysuit since some air is trap (torso) unless you let the water getting in. I never unsuited between dives. I will recommended this suit in late spring to late fall here in Vancouver BC. Longevity after two years is very good.

D
Dan
Review

I use the suit for 30 dives at this point. The water temperature is at the bottom 48-50F (9-10C) at 21 to 30 m (70 to 100) If you go under 21 m, it’s not a bad idea to add a 3mm vest because at the zipper there is just a thinner single layer of neoprene (2mm). By adding the 3mm vest that suit start to shine. At no point above 70 feet was the cold a problem. Below 70 feet you can feel it, but that was tolerable on a single tank. You will need more weight then a wetsuit but less then a drysuit since some air is trap (torso) unless you let the water getting in. I never unsuited between dives. I will recommended this suit in late spring to late fall here in Vancouver BC. Longevity after two years is very good.

J
James F.
Review

I dive in New England waters where the water temperature always hovers in the 47-50 degree range in the middle of summer when you’re 60′ deep. After two dives I was very comfortable, definitely a significant step up from the standard one or two piece 7mm wetsuits. The 4″ seals on the wrists and ankles, face seals and the dry suit zipper dramatically reduced water infiltration.

I tried two other semi-dry suits, one with a detached hood and the other with 1″ ankle and wrist seals. Both Semi-drys allowed significantly more water infiltration.

J
James F.
Review

I dive in New England waters where the water temperature always hovers in the 47-50 degree range in the middle of summer when you’re 60′ deep. After two dives I was very comfortable, definitely a significant step up from the standard one or two piece 7mm wetsuits. The 4″ seals on the wrists and ankles, face seals and the dry suit zipper dramatically reduced water infiltration.

I tried two other semi-dry suits, one with a detached hood and the other with 1″ ankle and wrist seals. Both Semi-drys allowed significantly more water infiltration.