Free 1-2 Day Shipping | Get up to 5% cashback | Need It Today? Same-Day Delivery Within 50 Miles

Scubapro MK19 EVO/A700

Scubapro  |  SKU: 12.719.010
Refer & Earn
Regular price $1,299.00
Shipping calculated at checkout.

In stock — ships from Irvine, CA



Pickup available at In Store

Usually ready in 2 hours


Pick accessories — 90% off with your $1000+ order

Your order unlocks accessories at 90% off.

 

Start  $501 pick $1252 picks
  • DiveCatalog.com Silicone Frameless Dive Mask

    $59.95$6.00

    1
  • DiveCatalog.com Retro Oval Dive Mask Without Nose Pocket Compensator

    $44.95$4.50

    1
  • DiveCatalog.com Classic Oval Dive Mask Silicone

    $44.95$4.50

    1
  • DiveCatalog.com Metal Coil Lanyard with Snap Clips

    $39.95$4.00

    1
  • DiveCatalog.com Junior Rubber Oval Dive Mask (15% smaller)

    $34.95$3.50

    1


Payment & Security

Payment methods

  • Amazon
  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Save with Open Box or Used Purchase

Save with a package

Ready-made packages that include this item

Scubapro Regulator Package – MK19 EVO/A700 Regulator + R105 Octopus + Definition Reg 10 Regulator Bag
Scubapro Regulator PackageMK19 EVO/A700 Regulator + R105 Octopus + Definition Reg 10 Regulator BagFrom $1,557.00
View package
Scubapro Regulator Package – MK25 EVO/A700 Regulator + R105 Octopus + Definition Reg 10 Regulator Bag
Scubapro Regulator PackageWith Scubapro MK19 EVO/A700 selected$1,607.00
View package
Scubapro Regulator Package – MK25 EVO/S620Ti Regulator + R105 Octopus + Definition Reg 10 Regulator Bag
Scubapro Regulator PackageWith Scubapro MK19 EVO/A700 selected$1,607.00
View package

Product Information

The Scubapro MK19 EVO/A700 is a complete first and second stage regulator system that pairs the environmentally sealed MK19 EVO diaphragm first stage with the all-metal, air-balanced A700 second stage. Built for cold water and contaminated environments, it uses a dry ambient pressure chamber with a double spring design, carries an INT (yoke) tank connector, and is rated for nitrox mixes up to 40 percent.

Who it is for

This system suits divers who want one regulator for cold, temperate and warm water, including those diving in freezing conditions or in contaminated environments where the first stage mechanism must stay isolated from the water. The LP swivel turret and five LP ports make it a practical choice for gear-heavy setups with an octopus, inflator hoses and multiple accessories, while the diver-adjustable inhalation knob and VIVA lever let you tune breathing effort dive by dive.

Key details

  • MK19 EVO diaphragm first stage in chrome-plated brass, environmentally sealed with anti-freeze protection
  • Dry ambient pressure chamber with double spring design
  • 2 opposing HP ports and 5 LP ports (4 high-flow plus 1 super high-flow axial) on an LP swivel turret
  • A700 A Series second stage with all-metal casing and metal valve housing
  • Air-balanced valve, adjustable inhalation effort knob and coaxial adjustable VIVA lever
  • Super-flow hose with oversized bore and a compact hi-flow mouthpiece
  • Water temperature rating: cold, temperate and warm
  • Nitrox compatible up to 40 percent
  • System weight 3.073 lb; 9.06 in L x 7.09 in W x 3.15 in H

Compatibility and sizing

This SKU (12.719.010) is the INT, or yoke, version and connects to standard yoke tank valves. It is approved for nitrox blends up to 40 percent oxygen.

What's in the box

  • MK19 EVO/A700 regulator system
  • Flock pad
  • 4 mm Allen key
  • Product manual (English)

DiveCatalog.com is an authorized Scubapro dealer and a real dive shop in Irvine, California since 2003. Call or chat with us at 888-701-4017 if you have questions about port configuration, hose routing or whether the INT connection fits the valves you dive.

⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

Frequently Asked Questions

How often does a scuba regulator need servicing?

Follow the interval in your regulator's manual, since manufacturers commonly specify an annual inspection or a set number of dives and many warranties depend on it. A regulator is life-support equipment, so service belongs with a factory-trained technician rather than being attempted at home. Have it looked at sooner than scheduled if you notice increased breathing effort, free-flow, bubbles, or water in the second stage.

How do I rinse and care for a regulator after diving?

Make sure the dust cap is dry and firmly seated over the first-stage inlet before the regulator goes anywhere near water, because water inside the first stage is the leading cause of internal corrosion. Rinse in fresh water without pressing the purge button, since purging while depressurized can draw water back into the second stage. Shake out the water and hang it to dry with the hoses in wide, gentle loops rather than tight bends.

Can I fly with a scuba regulator?

Regulators travel well and are usually best carried in hand luggage where they will not be crushed or lost. A regulator holds no gas of its own, so there is nothing inherently problematic about it on an aircraft, though the airline and security screeners always have the final say. Pack it dry with the dust cap in place, in a padded regulator bag or wrapped in soft gear.

Can I use my regulator with nitrox?

Many modern regulators are supplied as suitable for nitrox mixes up to 40 percent oxygen, which is the widely used recreational industry standard, while anything above that requires dedicated oxygen-clean equipment and procedures. Confirm what your specific regulator's manual states, and follow your nitrox training and your fill station's requirements. Never assume a regulator is oxygen-service clean simply because it looks clean or is new.

What is the difference between DIN and yoke regulators?

A yoke (A-clamp) fitting clamps over the tank valve and is the most common connection across much of the recreational world, while a DIN fitting screws into the valve and is standard in much of Europe and in technical diving. DIN captures the o-ring inside the threads, which many divers consider more secure, but yoke is often what rental cylinders provide. Adapters exist in both directions, so check what is used where you dive before deciding.

What is the octopus regulator for?

The octopus is your backup second stage, carried so you can share air with a buddy who is out of gas, or breathe from it yourself if your primary fails or free-flows. It is normally on a longer, brightly colored hose so it is easy to find and hand over under stress. Secure it in the triangle between your chin and the bottom of your rib cage so it is instantly accessible and not dragging through sand or coral.

How should I store a regulator between dive trips?

Store it fully dry, out of sunlight, with the dust cap in place and the hoses in wide loops rather than tightly coiled. Avoid hanging it by the second stages for long periods, which stresses the hose fittings; laying it flat in a padded bag or hanging it by the first stage is kinder. If it has sat unused for a long stretch, have it checked before your next trip rather than assuming it is ready to dive.

Is the Scubapro MK19 EVO/A700 available in DIN or yoke?

This system, item number 12.719.010, is the INT version, which is the yoke or A-clamp connection used with standard yoke tank valves. Scubapro does not list DIN or color variants for this specific SKU. If you need a different tank connection for your diving, contact us at 888-701-4017 and we can confirm what is available before you order.

Is the MK19 EVO/A700 suitable for cold water and ice diving?

Yes for cold water. The sealed MK19 EVO uses a dry ambient pressure chamber and double spring for anti-freeze protection; Scubapro rates it cold, temperate and warm.

How many hoses and accessories can I connect to the MK19 EVO first stage?

The MK19 EVO has 2 opposing high-pressure ports and 5 low-pressure ports, four high-flow plus one super high-flow axial port, all on an LP swivel turret. That supports a primary second stage, an octopus, a BC or drysuit inflator and a gauge or air-integrated transmitter, with the turret letting hoses rotate into a clean routing.

What does the VIVA lever on the A700 second stage do?

VIVA stands for Venturi Initiated Vacuum Assist, and the A700 uses a coaxial adjustable VIVA lever. Set toward the dive position it uses the air stream to assist inhalation and increase airflow; set toward pre-dive it reduces the chance of free-flow at the surface. Combined with the adjustable inhalation effort knob, it lets you fine-tune breathing feel during the dive.