DiveVolk New Dual Handle
In stock — ships from Irvine, CA
This item is currently on backorder. Order now to reserve yours, and we will ship it as soon as it is back in stock.
DiveVolk New Dual Handle - Silver is backordered and will ship as soon as it is back in stock.
Pickup available at In Store
Usually ready in 2 hours
-
DiveCatalog.com Quick Dry Multi Accessory Dive Gear Hanger for Boots, Gloves, Hood
$22.95$2.30
-
Nocturnal Lights Ball Joint Adapter for Underwater Ball Joint Arm Strobe and Lighting Systems
$19.99$2.00
-
Nocturnal Lights Buoyancy & Protective Sleeve for the SLX Underwater LED Lights
$19.99$2.00
-
Nocturnal Lights YS Arm Adapter for M700 Lights ADP.M7YS
$19.99$2.00
-
Nocturnal Lights Large Hand Mount with 1.75-2 Light Slot HM.LG
$19.99$2.00
-
Nocturnal Lights Medium Hand Mount with 1.385-1.625 Light Slot HM.MED
$19.99$2.00
-
Nocturnal Lights Small Universal Hand Mount with Two 1-1.25 Slots HM.SM
$19.99$2.00
-
DiveCatalog DIN Cap for 1st Stage (Female) for Scuba Diving Tanks - Scuba Essentials
$19.95$2.00
-
DiveCatalog Comfo-Bite Silicone Mouthpiece for Scuba Diving Regulators Black
$19.95$2.00
-
DiveCatalog Essentials - BCD and Regulator Hanger for Scuba Diving
$19.95$2.00
-
DiveCatalog Scuba Essentials - Wetsuit Hanger for Scuba Diving, Snorkeling, and Surfing
$19.95$2.00
-
Nocturnal Lights 45 Degree Ball Joint Adapter with T-base Slot BJADAPTER.TBASE45
$18.99$1.90
-
DiveCatalog.com Underwater Pointer Tool
$18.95$1.90
-
DiveCatalog Hose Clamp for Scuba Diving - Scuba Essentials
$17.95$1.80
-
DiveCatalog Neoprene Mask Strap Cover
$17.00$1.70
-
Nocturnal Lights 90 Degree Ball Joint Adapter with T-base Slot BJADAPTER.TBASE90
$15.99$1.60
-
Nocturnal Lights 2 YS Flex Arm Extra Short FLEXARM.YS2
$15.99$1.60
-
DiveCatalog.com Basic Black Silicone Snorkel
$14.95$1.50
-
DiveCatalog Silicone Scuba Octopus Mouthpiece with Color Tab & Regulator Tie – Comfortable, Leak-Free Dual Color
$14.95$1.50
-
DiveCatalog Silicone Mouthpiece Replacement w/ installation - Scuba Essentials
$14.95$1.50
-
DiveCatalog Rubber Tank Valve Protector for Scuba Diving Tanks - Scuba Essentials
$11.95$1.20
-
DiveCatalog.com Regulator Necklace
$11.95$1.20
-
DiveCatalog.com Water Activated LED Signal Light - Green
$11.95$1.20
-
DiveCatalog x Stream2Sea Mask Defog, Flip Cap Bottle, 2 oz
$9.95$1.00
-
DiveCatalog Fin Strap and Scuba Dive Accessory Holder Scuba Accessory Essentials
$9.95$1.00
-
DiveCatalog.com Dry Box with Lanyard
$9.95$1.00
-
DiveCatalog x Stream2Sea Mask Defog Spray, 2 oz
$9.95$1.00
-
DiveCatalog Female Quick Release Clip with Bungee cord for Scuba Accessory Essentials
$8.99$0.90
-
DiveCatalog.com Fin Holder
$7.95$0.80
-
DiveCatalog.com Scuba Mouthpiece Cover
$7.95$0.80
-
Multi-Purpose Clip with Male and Female Quick Release Clip and Bungee Cord Scuba Accessory Essentials by DiveCatalog
$5.95$0.60
-
DiveCatalog Scuba Essentials - PVC Tank Valve Protector for Scuba Diving Tanks
$5.95$0.60
-
Whistle with Lanyard in Orange by DiveCatalog
$5.00$0.50
-
Nocturnal Lights 7 Ultra Slim Underwater Camera Tray TRAY.SLIM5
$3.99$0.40
-
DiveCatalog.com Stainless Steel 2 Inch Webbing Keeper with Serrated Teeth Weights
$1.95$0.20
-
DiveCatalog.com Weight Keeper Stopper - Black
$1.45$0.15
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Product Information
The DIVEVOLK Dual Handle Tray is an ergonomic dual-handle mounting tray for underwater smartphone housings and compact camera housings, machined from aviation aluminium alloy with an oxidation-coated body. Handle spacing adjusts from 23 cm to 28.5 cm, and dual 1/4 inch screw mounts with dual ball head mounts let you add lights or arms.
Who it is for
It is built for underwater photographers and videographers who shoot with a phone housing or a small camera housing and want two-handed stability instead of a one-handed grip. The adjustable width means it adapts to various types of camera housings, including smartphone underwater housings, compact camera housings and action cameras such as GoPro, DJI Action and Insta360. The dual ball head mounts let you attach arms for video lights or strobes alongside your housing.
Key details
- Material: aviation aluminium alloy with oxidation body
- Adjustable handle spacing: minimum width 23 cm, maximum width 28.5 cm
- Weight: 550 g on land, 330 g underwater
- Mounts: dual 1/4 inch screw mount with dual ball head mount
- Rotation function: remove the phone by slightly loosening the screws, with no full disassembly
- Colors: Black (DADDHT) and Silver/Gray (DADDHTG)
- Warranty: 1 year, per DIVEVOLK
Compatibility and sizing
Handle spacing adjusts between 23 cm and 28.5 cm to adapt to various types of camera and smartphone housings. The tray mounts housings and accessories through standard 1/4 inch screw threads. The two ball heads accept arms for attaching lights. DIVEVOLK notes that underwater housings can flood if the housing is not fully sealed or the phone is not properly aligned and seated, so follow all DIVEVOLK instructions and run a seal check before every dive.
DiveCatalog.com is an authorized Divevolk dealer and a real dive shop in Irvine, California since 2003. Call 888-701-4017 or start a chat if you want help confirming the handle width against your housing or choosing arms for the ball mounts.
- Adjustable handle width adapts the tray to various types of camera and smartphone housings.
- 23 cm to 28.5 cm spacing covers the minimum and maximum handle positions.
- Dual 1/4 inch screw mount secures the housing on a standard photo thread.
- Dual ball head mounts accept arms for attaching lights.
- Comfort grip handles use an ergonomic design for two-handed shooting.
- Special rotation function lets you remove the phone by slightly loosening the screws, without full disassembly.
- Aviation aluminium alloy body with an oxidation coating for underwater use.
- Weight-reducing cutouts in the bracket keep structural rigidity while trimming mass.
- 550 g on land, 330 g underwater for a manageable in-water rig weight.
- Two color options Black (DADDHT) and Silver/Gray (DADDHTG).
- Backed by DIVEVOLK with a 1-year warranty.
| Product | DIVEVOLK Dual Handle Tray |
| Type | Dual handle tray for underwater phone and camera housings |
| Model # Black | DADDHT |
| Model # Gray / Silver | DADDHTG |
| Adjustable handle spacing | Minimum width 23 cm / maximum width 28.5 cm |
| Weight (on land) | 550 g |
| Weight (underwater) | 330 g |
| Material | Aviation aluminium alloy with oxidation body |
| Housing mount | Dual 1/4 inch screw mount |
| Accessory mount | Dual ball head mount |
| Grip | Comfort grip, ergonomic design |
| Rotation function | Phone removal by slightly loosening the screws, no full disassembly |
| Compatibility | Smartphone underwater housings, compact camera housings, action cameras (GoPro, DJI Action, Insta360) |
| Colors | Black, Silver / Gray |
| Warranty | 1 year |
⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
What housings does the DIVEVOLK Dual Handle Tray fit?
It fits smartphone underwater housings, compact camera housings and action cameras including GoPro, DJI Action and Insta360. The housing attaches through dual 1/4 inch screw mounts. The handle spacing adjusts from a minimum width of 23 cm to a maximum width of 28.5 cm to adapt to various housings.
Can I mount video lights on this tray?
Yes. The tray has a dual ball head mount for attaching arms with lights, plus dual 1/4 inch screw mounts for the housing. The dual 1/4 inch screw mount holds the housing itself. Call 888-701-4017 if you want help matching arm clamps to the ball heads.
Do I have to take the tray apart to remove my phone?
No. A special rotation function lets you remove the phone by only slightly loosening the screws, so the tray does not need full disassembly between shots or dives.
How do I care for the tray after a saltwater dive?
Separate the accessories first, since salt collects in the joints between parts, then soak everything in clean fresh water for at least 10 minutes. Rinse under running water to clear remaining seawater from metal parts and crevices, air dry fully in the shade, inspect seals, joints and metal for wear, and store cool, dry and out of direct sunlight.
