SEA & SEA YS-D3 Lightning with Free DiveCatalog's Coil Lanyard
SEA & SEA YS-D3 Lightning with Free DiveCatalog's Coil Lanyard is backordered and will ship as soon as it is back in stock.
What's in this bundle
DiveCatalog Quick Release Coil Lanyard with Buckle Scuba Essentials$29.95 valueSKU DC-COIL-LANYARD-BLKYou save $79.95 (9%) vs buying separately
SEA & SEA YS-D3 Lightning with Free DiveCatalog's Coil Lanyard is backordered and will ship as soon as it is back in stock.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Product Information
The Sea & Sea YS-D3 MKII LIGHTNING is an underwater strobe rated to 100m / 330ft with a Guide Number of 33 (28 with the diffuser attached). This listing does not include the Fiber-Optic Cable.
Who it is for
It suits underwater photographers shooting through a Sea&Sea or third-party optical TTL converter, since the YS-D3 MKII LIGHTNING carries a newly designed circuit that improves TTL accuracy and converter compatibility over the original YS-D3 LIGHTNING, while keeping the same product number (03123) as a running change update.
Key details
- Guide Number 33, or 28 with the diffuser attached, ISO 100/m on land
- Beam angle 80°x105° without diffuser, 100°x110° with diffuser, and 150°x170° with the optional Dome Diffuser
- Runs on 4x AA batteries: 6V with alkaline, 4.8V with Ni-MH
- 140 flashes on alkaline batteries, 220 flashes on Ni-MH batteries, with a full recycle time of 3.5 seconds (alkaline) or 1.7 seconds (Ni-MH)
- Color temperature 5800K without the diffuser, 5500K with it
- Depth rated to 100m / 330ft
- Dimensions 92x111x147mm (3.6 x 4.4 x 5.8 inches) and weight 610g / 21.5oz without batteries, both excluding the ball base; underwater weight is approximately -20g with batteries and ball base installed
- 11-step light level control dial, DS-TTL II and Slave TTL exposure control, 30-minute auto power off, and an LED target light adjustable between 300 and 150 lumen
Compatibility and sizing
The strobe connects via a 5-pin Sync cord/N or a Fiber-Optic Cable, though this listing does not include the Fiber-Optic Cable. It mounts on the included standard ball base and is also compatible with the optional YS Base and the Diagonal Ball Base (YS-D3 series only), plus optional Snoot and Dome Diffuser accessories.
What's in the box
- Strobe unit
- Ball Mount Strobe Adaptor
- Diffuser
- Silicone grease
- DiveCatalog Quick Release Coil Lanyard with Buckle, bundled by DiveCatalog
DiveCatalog.com is an authorized Sea & Sea dealer and a dive shop in Irvine, California, since 2003. Call or chat with us at 888-701-4017 if you have questions about fit, cable compatibility, or accessory options for this strobe.
- Aspherical optical toroidal lens: a newly designed circuit and lens disperse light evenly from center to edge.
- Consecutive firing: fires continuously at GN16 without interval, and can refire within about 0.8 seconds at GN22.
- DS-TTL II and Slave TTL: supports Sea&Sea DS-TTL II exposure control and Slave TTL triggering.
- Two-stage ready signal: visual and audible signals indicate when the strobe is fully charged.
- Over-pressure relief valve: built in for safety at depth.
- 11-step GN dial: light level control dial adjusts from GN1 to GN33 across 11 steps.
- LED target light: adjustable between 300 lumen and 150 lumen output.
- Auto power off: shuts down automatically after 30 minutes of inactivity.
- Depth rated: rated to 100m / 330ft.
- Battery caution: do not use non-recommended batteries such as lithium primary batteries, due to risk of leakage or overheating.
| Guide Number (ISO 100/m, land) | 33, 28 (with Diffuser attached) |
| Beam Angle | 80°x105° (without Diffuser), 100°x110° (with Diffuser), 150°x170° (with optional Dome Diffuser) |
| Batteries | 4xAA, Alkaline: 6V, Ni-MH: 4.8V |
| Number of Flashes | Alkaline: 140, Ni-MH: 220 |
| Recycle time (full) | Alkaline: 3.5 sec. Ni-MH: 1.7 sec. |
| Color temperature | 5800K (without diffuser) |
| Color temperature w/diffuser | 5500K |
| Depth rating | 100m / 330ft |
| Dimensions (WxHxD) | 92x111x147mm / 3.6 x 4.4 x 5.8 inches (excluding ball base) |
| Weight | 610g / 21.5oz (w/o batteries, excluding ball base) |
| Underwater weight | Approx. -20g (incl. batteries and ball base) |
| Light level control dial (GN) | 1 / 1.4 / 2 / 2.8 / 4 / 5.6 / 8 / 11 / 16 / 22 / 33 (11 steps) |
| Auto power off | 30 min |
| Sync cord | 5-pin Sync cord/N, Fiber-Optic Cable (genuine SEA&SEA recommended) |
| LED target light | Adjustable in 2 steps (300 lumen / 150 lumen) |
- Strobe unit
- Ball Mount Strobe Adaptor
- Diffuser
- Silicone grease
- DiveCatalog Quick Release Coil Lanyard with Buckle, bundled by DiveCatalog
Frequently Asked Questions
Does this YS-D3 MKII LIGHTNING come with the Fiber-Optic Cable?
No, this DiveCatalog listing does not include the Fiber-Optic Cable. The strobe can be triggered through a 5-pin Sync cord/N or a Fiber-Optic Cable. The box holds the strobe unit, Ball Mount Strobe Adaptor, Diffuser, silicone grease and DiveCatalog's Coil Lanyard, so source a Fiber-Optic Cable separately.
What batteries does the YS-D3 MKII LIGHTNING use and how many flashes do they last?
It runs on 4x AA batteries, 6V with alkaline or 4.8V with Ni-MH. Alkaline batteries deliver about 140 flashes with a 3.5 second full recycle time, while Ni-MH batteries deliver about 220 flashes with a faster 1.7 second recycle time.
How is the YS-D3 MKII LIGHTNING different from the original YS-D3 LIGHTNING?
It is a running change update, so the product number (03123) stayed the same. The MKII version uses a newly designed circuit and aspherical optical toroidal lens that improve TTL light intensity accuracy and compatibility with Sea&Sea and third-party optical TTL converters, while keeping the same Guide Number, beam angle, and depth rating as the original.















