Atomic Aquatics SubFrame Mask, Slim Fit
Atomic Aquatics SubFrame Mask, Slim Fit - Clear/Black is backordered and will ship as soon as it is back in stock.
Pickup currently unavailable at In Store
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Product Information
Atomic Aquatics SubFrame Mask, Slim Fit is a two-window scuba mask built on the SubFrame platform, with a slimmer skirt shaped for narrower facial profiles, an internal frame molded beneath the silicone skirt, and UltraClear optical glass lenses locked in place by a stainless steel retainer.
Who it is for
The Slim Fit skirt is shaped for divers with higher cheekbones, smaller and higher noses, and a narrower nose bridge, using a smaller, higher nose pocket than the standard SubFrame skirt. It keeps the same SubFrame lenses, internal frame, straps and buckles, so divers who need a slimmer seal get the same core construction as the rest of the SubFrame line.
Key details
The SubFrame design molds an internal frame directly beneath the surface of the silicone skirt, so the mask gets its strength and rigidity without a separate external plastic frame. A stainless steel retainer locks the UltraClear lenses in place and reinforces the nose bridge area, and the two-window layout is built for a wide field of view. Squeeze-to-adjust buckles let you fine-tune the strap. The mask carries a limited-lifetime warranty against frame breakage and the frame design is protected under US Patent #7,181,778.
Compatibility and sizing
This Slim Fit is one of three SubFrame fit options alongside Regular and Medium, and it is available in Clear/Black, Clear/Blue, Clear/Aqua, Black/Black, Black/Blue, and Black/Aqua skirt and accent color combinations. Atomic Aquatics also offers factory-installed corrective lenses for the SubFrame line in -1.0 to -8.0 diopters, in 0.5 increments.
DiveCatalog.com is an authorized Atomic Aquatics dealer and a dive shop in Irvine, California, open since 2003. Call 888-701-4017 or chat with us if you have questions about fit or lens compatibility before you order.
- Slim Fit skirt Shaped with a smaller, higher nose pocket and narrower nose bridge for divers with higher cheekbones and smaller noses.
- Internal SubFrame Molded directly beneath the surface of the silicone skirt for strength and rigidity without a bulky external frame.
- Stainless steel retainer Locks the lenses in place and reinforces the nose bridge area.
- UltraClear lenses Optical quality glass with high light transmission and no color distortion.
- Two-window design Dual-lens layout built for a wide field of view.
- Squeeze-to-adjust buckles Allow quick strap fit customization.
- Limited-lifetime warranty Covers the mask against frame breakage.
- Patented frame Internal SubFrame construction is protected under US Patent #7,181,778.
- Corrective lens option Factory-installed lenses available from -1.0 to -8.0 diopters in 0.5 increments.
- Color options Available in Clear/Black, Clear/Blue, Clear/Aqua, Black/Black, Black/Blue, and Black/Aqua.
| Brand | Atomic Aquatics |
| Model | SubFrame Mask, Slim Fit |
| Fit | Slim: smaller, higher nose pocket, narrower nose bridge |
| Lens | UltraClear optical quality glass |
| Frame | Internal SubFrame molded beneath the silicone skirt |
| Lens retainer | Stainless steel |
| Buckles | Squeeze-to-adjust |
| Window configuration | Two-window, dual lens |
| Skirt material | Silicone rubber |
| Warranty | Limited-lifetime warranty against frame breakage |
| Patent | US Patent #7,181,778 |
| Corrective lens option | -1.0 to -8.0 diopters, 0.5 increments, factory-installed, optional |
| Available colors | Clear/Black, Clear/Blue, Clear/Aqua, Black/Black, Black/Blue, Black/Aqua |
⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
How do I know if a dive mask fits?
Hold the mask against your face without using the strap, look slightly down, and inhale gently through your nose; a well-fitting mask holds itself in place for a few seconds. Check that the skirt seals all the way around without digging into the nose bridge, and that there are no gaps at the temples or above the upper lip. A mustache can break the seal even on an otherwise well-fitting mask.
Why does my brand new mask fog no matter what I do?
New masks carry a residue on the inside of the lens left over from manufacturing, and defog cannot stick to it, so the mask fogs until that film is removed. The standard pre-treatment is to scrub the inside of the lens with a mild abrasive cleaner or a dedicated mask prep and rinse thoroughly, repeating if it still fogs. Follow the mask manufacturer's instructions, particularly on coated or mirrored lenses.
How do I stop my dive mask from fogging?
Apply defog to a dry lens before the dive, spread it over the whole inner surface, then rinse briefly with water just before you put the mask on. Fogging happens when warm moist air meets a cooler lens, so a clean lens with a thin surfactant film is the fix. Keep sunscreen off your fingers before handling the inside of the lens, because that film fogs badly and is hard to remove.
Why do dive masks need tempered glass?
Dive mask lenses should be tempered safety glass because it resists scratching and, if it ever does break, fractures into blunt granules rather than sharp shards next to your eyes. Untempered or plastic lenses scratch easily and can craze, which is why tempered glass is standard on scuba masks. Look for the tempered marking etched on the lens.
Can I get a dive mask with my prescription?
Yes, prescription options are widely available, usually as masks fitted with stock corrective lenses in set diopter steps, custom-ground lenses installed in compatible frames, or bonded lenses added to an existing lens. Not every mask frame accepts replacement lenses, so check compatibility before you buy the frame. An optician or a dive shop can help translate your glasses prescription into a mask lens choice.
How should I care for and store a dive mask?
Rinse it in fresh water after each dive day and let it dry away from direct sunlight, avoiding anything abrasive on the treated inner lens. Store it in a rigid mask box so the skirt is never compressed or creased, since a set crease in the skirt is a permanent leak. Keep silicone skirts away from petroleum products and prolonged UV, both of which yellow and harden them.
How tight should a dive mask strap be?
Not tight at all in the usual sense, because over-tightening is the most common cause of both leaks and headaches; a hard-pulled strap distorts the skirt and lifts the seal off your face. The strap should sit high on the back of your head and be just firm enough to keep the mask from shifting. If you need it cranked down to stop a leak, the mask does not fit your face.
What is the difference between the SubFrame Slim Fit and the Regular SubFrame mask?
The Slim Fit uses a smaller, higher nose pocket and a narrower nose bridge than the Regular SubFrame skirt, shaped for divers with higher cheekbones and smaller noses. It keeps the same SubFrame lenses, internal frame, stainless steel retainer, straps and buckles as the rest of the SubFrame line.
Can I get the SubFrame Slim Fit mask with prescription lenses?
Yes, Atomic Aquatics offers factory-installed corrective lenses for the SubFrame line in -1.0 to -8.0 diopters, in 0.5 increments. Check with Atomic Aquatics or your dive shop to confirm the diopter strength you need is available before ordering.
What colors does the Atomic Aquatics SubFrame Slim Fit mask come in?
It is available in six color options: Clear/Black, Clear/Blue, Clear/Aqua, Black/Black, Black/Blue, and Black/Aqua. Each color option is sold under its own SKU, so confirm the specific color code when ordering.
What warranty comes with the SubFrame Slim Fit mask?
The SubFrame Slim Fit carries a limited-lifetime warranty against frame breakage. The internal SubFrame construction that the warranty covers is also protected under US Patent #7,181,778.

















