Aqualung I300C DC 2-Gauge Imp Black/Grey

A dive computer tracks the actual depth and time profile you have dived and the tissue loading that follows from it, which is personal to you. A rented computer has no record of your recent diving, and swapping models each trip means relearning the display and menus when you should be focused on the dive. Owning one you know well is a genuine safety and comfort improvement.

No. A computer only tracks the profile of the diver actually wearing it, and even buddies who stay together do not follow identical depth and time profiles. Every diver needs their own computer, and passing one between divers or between dives is unsafe.

Conservatism settings make the computer's calculations more cautious, shortening allowed bottom times and adding margin beyond the base algorithm. Divers commonly add conservatism for factors such as cold, hard work, fatigue, or repetitive multi-day diving. How and when to adjust it is covered by your training and your computer's manual, so set it before you get in the water and follow what your computer tells you during the dive.

Broadly there are two types: user-replaceable batteries, often a coin cell that you or a shop swap along with resealing an o-ring, and sealed rechargeable batteries that charge from a cable or dock. Neither is universally better, as replaceable cells are convenient on remote trips while rechargeables avoid ever opening the case. Follow the manual exactly for any battery change, because an improperly seated o-ring or case is the usual cause of a flooded computer.

Yes, both change the picture, and both are governed by your training agency's guidance and your computer's instructions rather than any casual rule of thumb. Many computers have an altitude setting that must be configured before diving at elevation, and most display a no-fly or surface-interval countdown after a dive. Follow your computer and your training, and ask a dive professional or a dive-medicine specialist if you are unsure.

Rinse it in fresh water after every dive day, paying attention to the buttons and around any sensor openings where salt crystals form, and let it dry fully before storing. Keep it out of prolonged direct sun and extreme heat, and avoid pressing buttons while sand is on the case. Inspect the strap or bungee often, because a failed strap loses far more computers than a failed computer does.

A wrist computer is worn like a watch and read by raising your arm, while a console computer sits at the end of a hose with your other gauges. Air integration means the computer also displays cylinder pressure, either through a hose or from a wireless transmitter on the first stage, and often estimates remaining gas time. All of them run a decompression algorithm, so the real difference is where you read the information and how much of it you get.

The 2-gauge configuration mounts the i300C computer alongside a submersible pressure gauge in one console, so depth, time, deco status and cylinder pressure read together. There is no compass in this version, and cylinder pressure comes from the mechanical gauge rather than from electronic air integration.

The i300C is rated to a maximum depth of 100 m / 330 ft in both dive and free dive modes. Maximum PO2 is user selectable from 1.1 to 1.6, and the FO2 range runs from 21% to 100%, so the computer supports air and nitrox planning across normal recreational depths.

Yes. Bluetooth connects the i300C to the free DiverLog+ app on iOS and Android, where you can download your dive log and adjust settings instead of working through the two buttons on the unit. The same connection handles user-installable software updates, and the app lets you share dive stats, location and photos after the dive.

This variant, SKU NS115136 in Black/Grey, is factory configured in Imperial units. To confirm which configuration suits the diving you do, call DiveCatalog at 888-701-4017 or start a chat before ordering.